SLAMSqueezeBench: Comparing SLAM Systems under Resource Constraints

Simultaneous localization and mapping (SLAM) is one of the fundamental problems in robotics, as it enables autonomous operations in real-world scenarios. Under low illumination, reduced contrast, sensor noise, and motion blur degrade both feature extraction and feature matching, while compensating with LiDAR, depth, or thermal sensors raises cost, power draw, and integration complexity. Existing benchmarks remain dominated by well-lit indoor or daylight sequences, leaving open how far SLAM with standard RGB cameras can be pushed in the dark. We benchmark six systems spanning the feature-based, direct, filter-based, and learning-based paradigms - ORB-SLAM3, DSO, Kimera-VIO, OpenVINS, DPVO, and DPV-SLAM - on five LaMARia sequences of varying difficulty and illumination, reporting absolute and relative pose error alongside control-point recall. Kimera-VIO is the only system to track all five sequences to completion, combining the lowest relative pose error with steadily growing absolute error due to the absence of loop closure; DPVO and DPV-SLAM never lose tracking but incur absolute errors of roughly 100 m under low light; and the classical monocular pipelines (ORB-SLAM3, DSO) together with the filter-based OpenVINS fail outright or diverge on most of the harder and low-light sequences. The results suggest that RGB-only SLAM maintains stable low-light tracking only when both inertial fusion and global optimization are present. Closing the remaining gap will likely require low-light-specific learned front-ends or a return to complementary sensing.

We present AMB3R-SLAM, a real-time monocular SLAM system capable of reconstructing kilometer-scale trajectories over 10k frames on a single consumer-grade GPU. Our model couples a lightweight front-end for low-latency online tracking with a hierarchical backend that progressively enforces local, mid-level, and global consistency. By avoiding bundle adjustment that relies on the static world assumption, our system naturally handles complex dynamic scenes out of the box. Furthermore, we demonstrate that our method can be extended to leverage stereo, RGB-D, and LiDAR as additional inputs. AMB3R-SLAM achieves strong camera tracking performance across 9 datasets, reducing the absolute trajectory error (ATE) of previous state-of-the-art methods on VBR and Oxford Spires by over 70%. With additional LiDAR input, our model further reduces ATE to sub-meter level on KITTI and VBR datasets.

Reliable localization in GPS-denied, visually degraded environments is critical for autonomous UAV opera- tions. This paper presents a systematic comparative evaluation of five V-SLAM systems ORB-SLAM3, DPVO, DROID-SLAM, DUSt3R, and MASt3R spanning classical, deep learning, recurrent, and Vision Transformer (ViT) paradigms. Experiments are conducted on curated sequences from four public benchmarks (TUM RGB-D, EuRoC MAV, UMA-VI, SubT-MRS) and a custom monocular indoor dataset under five controlled degradation conditions (normal, low light, dust haze, motion blur, and combined), with sub-millimeter Vicon ground truth. Results show that ORB-SLAM3 fails critically under severe degradation (62.4% overall TSR; 0% under dense haze), while learning-based methods remain robust: MASt3R achieves the lowest degraded ATE (0.027 m) and DUSt3R the highest tracking success (96.5%). DPVO offers the best efficiency robustness trade-off (18.6 FPS, 3.1 GB GPU memory, 86.1% TSR), making it the preferred choice for memory-constrained embedded platforms. Embedded deployment analysis across NVIDIA Jetson platforms provides actionable guidelines for SLAM selection under SWaP-constrained UAV scenarios.