Robust initialization is crucial for online systems. In the letter, a high-frequency and resilient initialization framework is designed for LiDAR-inertial systems, leveraging both inertial sensors and Doppler LiDAR. The innovative FMCW Doppler LiDAR opens up a novel avenue for robotic sensing by capturing not only point range but also Doppler velocity via the intrinsic Doppler effect. By fusing point-wise Doppler velocity with inertial measurements under non-inertial kinematics, the proposed framework, Free-Init, eliminates reliance on motion undistortion of LiDAR scans, excitation motions, and map correspondences during the initialization phase. Free-Init is also plug-and-play compatible with typical LiDAR-inertial systems and is versatile to handle a wide range of initial motions when the system starts, including stationary, dynamic, and even violent motions. The embedded Doppler-inertial velocimeter ensures fast convergence and high-frequency performance, delivering outputs exceeding 10 kHz. Comprehensive experiments on diverse platforms and across myriad motion scenes validate the framework's effectiveness. The results demonstrate the superior performance of Free-Init, highlighting the necessity of fast, resilient, and dynamic initialization for online systems.
Conventional LiDAR-inertial odometry (LIO) or simultaneous localization and mapping (SLAM) methods heavily rely on geometric features of environments, as LiDARs primarily provide range measurements instead of motion measurements. From now on, however, the situation changes thanks to the novel Frequency Modulated Continuous Wave (FMCW) Doppler LiDARs. FMCW Doppler LiDARs not only offer the point range with high resolution but also capture the instant point Doppler velocity through the Doppler effect. In the letter, we propose FMCW-LIO, a novel and robust LIO, leveraging intrinsic Doppler measurements from FMCW Doppler LiDARs. To correctly exploit Doppler velocities, a motion compensation method is designed, and a Doppler-aided observation model is applied for on-manifold state estimation. Then, dynamic points can be effectively removed by the Doppler criteria, deriving more consistent geometric observations. FMCW-LIO eventually achieves accurate state estimation and static mapping, even in structure-degenerated environments. Extensive experiments in diverse scenes are performed and FMCW-LIO outperforms other algorithms on both accuracy and robustness.
Robust and accurate odometry estimation is essential in modern robotics. In environments characterized by highly dynamic motion and sensor noise, odometry estimation becomes increasingly challenging. Autonomous racing combines both factors in an unstructured setting, where minimizing odometry latency is essential for stable closed-loop control. This paper introduces FAR-LIO, a highly optimized CUDA-accelerated LiDAR-inertial odometry framework developed for Fast, Accurate, and Robust performance. Our system leverages a novel CUDA-based voxel hashmap to enable parallelized nearest-neighbor search and efficient map updates. We employ a sparsity-aware Generalized Iterative Closest Point algorithm with adaptive thresholding on top of the CUDA-based voxel hashmap with adaptive density to achieve low-latency without compromising accuracy. An Extended Kalman Filter serves as a robust backend. It utilizes an upsampling and delay compensation strategy to fuse the LiDAR odometry with high-frequency IMU data, thereby ensuring a robust and smooth odometry output. We evaluate FAR-LIO across four different sensor setups, using both public datasets and data from two autonomous racecars driving at speeds of up to 250 km/h. FAR-LIO achieves an average 6.9% reduction in the positional error and 38.4% lower runtime compared to state-of-the-art baselines on target hardware using a single parameter set. This demonstrates its computational efficiency and broad applicability. To build upon our work, our code is available open-source on https://github.com/TUMFTM/FAR-LIO.
Maximilian Leitenstern, Marcel Weinmann, Patrick Haft +3
LiDAR-inertial odometry (LIO) is a key component of autonomous navigation, but high-dynamic driving exposes two coupled challenges: intra-scan motion distortion and vibration-contaminated inertial measurements. Most real-time LiDAR-inertial pipelines propagate the system state by integrating raw IMU measurements and then use the propagated trajectory for point cloud de-distortion, thereby propagating inertial noise into both the corrected scan and the subsequent scan-to-map registration. This paper presents WNOJ-LIO, a LiDAR-IMU fusion framework based on a White-Noise-on-Jerk (WNOJ) Extended Kalman Filter (EKF). WNOJ-LIO employs a decoupled WNOJ prior on R3×\SO(3) for state prediction and treats the IMU as a high-frequency measurement source rather than the driver of state propagation. The resulting posterior state history is then used for LiDAR scan de-distortion and subsequent point-to-plane LiDAR updates. The decoupled process model enables closed-form covariance propagation, thereby bridging the gap between batch WNOJ Gaussian process (GP) trajectory priors and recursive filtering. Simulation results demonstrate improvements in acceleration and angular-velocity denoising, scan de-distortion, and localization accuracy over a FAST-LIO-style baseline. Real-world experiments were conducted using an autonomous racing car on four driving segments with maximum speeds ranging from 53 to 208~km/h, covering a wide range of vehicle vibration levels. The experiments further validate the proposed method and provide a comprehensive evaluation of its performance in estimating acceleration, angular velocity, body-frame linear velocity, attitude, and position under highly dynamic driving. The source code of WNOJ-LIO is publicly available at https://github.com/LvJohny/wnoj-ekf-lio.git.