High-Voltage Optocoupler Amplifier for Electrostatic Actuators

As haptic interfaces integrate more seamlessly into wearables and everyday environments, they increasingly require actuators that are soft, thin, silent, and energy efficient. However, conventional motors and temperature-responsive polymers often struggle to deliver these properties due to their bulky form factors and high power consumption. High-Voltage Electrostatic Actuators (HVEAs), which generate force by applying an electric field to localized charge concentrations using high voltages and ultra-low currents, have recently emerged as a compelling alternative due to their fast, silent, and low-power operation within highly customizable and compliant form factors. This paper presents a focused review of HVEAs for haptics, examining four major classes: electrostatic switchable adhesives, dielectric elastomer actuators, soft electrohydraulic actuators, and electrokinetic pumps. For each class, we describe their mechanisms that enable haptic output; characterize their bandwidths, force densities, and spatial scalability; and evaluate their versatility for rendering cutaneous and kinesthetic feedback across wearable and world-grounded interfaces. Through this cross-technology analysis, we identify common design constraints and emerging strategies for improving ergonomics, streamlining fabrication, and integrating self-sensing. We conclude by outlining where HVEAs are uniquely positioned to advance haptic interaction and highlighting key research directions needed to translate these technologies into practical systems.

Discrete-time joint acceleration constraints are widely used to enforce position and velocity limits. However, under voltage-constrained electric actuators, kinematically admissible accelerations may be physically unrealizable, exposing a missing execution-level abstraction. We propose Voltage-Realizable Acceleration (VRA), a joint-level acceleration interface that grounds kinematic acceleration in voltage-constrained actuator physics by restricting commanded accelerations to voltage-realizable constraints. Hardware experiments on electric actuators and a wheel-legged quadruped show that VRA removes unrealizable accelerations, restores consistent near-constraint execution, and reduces constraint-induced oscillations.

Origami structures have been an active area of research due to their high volume-to-mass ratio, packability, and shape adaptability. Previously-developed actuated foldable structures have either embedded linear actuators into the structure, or have attached non-folding rotary motors to the exterior structure. Further, in prior work, actuators directly embedded in the structure of folding media all contributed to linear or folding motion, not to continuous rotary motion. On the macro-scale there has not yet been a folding continuous rotary actuator. This paper details the development and testing of the first macro-scale origami rotary motor that can be folded flat, and then unfurled to operate. Using corona discharge for torque production, the prototype motor achieved an expansion ratio of over 3.8:1, reached a top speed of 1720 rpm when driven at -30 kV, and exhibited a maximum motor torque over 0.25 mNm with an active component torque density of 0.11 Nm/kg.