Lollypop: Camera-to-Motion-Capture Calibration Verification with a Reference Target

Optical motion capture (mocap) systems are widely used for ground-truth capture in AR/VR, SLAM and robotics datasets. These datasets require extrinsic calibration to align mocap coordinates to external camera frames -- a step that is subject to multiple sources of error in practice, and failures often go undetected until they corrupt downstream data. These issues are compounded for fisheye cameras, where spatially non-uniform distortion makes both calibration and verification more challenging. We present a calibration and verification system designed for this setting. Concretely, we target robustness to board-to-marker attachment variation, optimization initialization ambiguity, and session-to-session calibration drift after deployment. The calibration jointly estimates camera extrinsics and the board-to-marker transform, and uses a staged solver to improve convergence reliability under ambiguous initialization. The verification component, \lollypop, provides fast, operator-independent assessment through a measurement chain entirely independent of the calibration data. In experiments on a Meta Quest 3 headset with fisheye cameras, our calibration outperforms existing benchwork, and lollypop reliably detects calibration degradation over time. The system has been deployed in production data collection pipelines.

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

We present a laser-tracker-assisted hand-eye calibration method for camera-equipped mobile robots. The method combines laser-tracker-based 3D metrology with camera-based 2D observations. Building on our previous laser-tracker-assisted camera-to-robot calibration method for ground-observing mobile robots, we present a generalized formulation for calibrating the camera pose in the coordinate system of tracker-localized mobile robots. The new approach relaxes assumptions of our previous method on robot and camera configuration by chaining multiple calibration targets resulting in a more general approach supporting various camera-equipped mobile robot systems.