Reading the Room: Scale-ambiguous Semantic Registration of Sparse VSLAM Maps to Floor Plans in Partially Built Environments

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual simultaneous localization and mapping (SLAM) and floor plan localization systems are required. In this paper, we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across ten floors over an eight-month period of the construction project. Ground truth trajectories are collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor plan localization, which suggests that this task receives less attention from researchers and motivates further exploration through proposed dataset and challenge, available at: https://hilti-trimble-challenge.com/dataset-2026.

Accurate localization is a fundamental requirement for autonomous robots operating in indoor environments. Scene graphs encode the spatial structure of an environment as a hierarchy of semantic entities and their relationships, and can be constructed both online from robot sensor data and offline from architectural priors such as Building Information Models (BIM). Matching these two complementary representations enables drift correction in SLAM by grounding robot observations against a known structural prior. However, establishing reliable node-to-node correspondences between them remains an open challenge: existing combinatorial methods are prohibitively expensive at scale, and prior learned approaches address only flat graph matching, ignoring the multi-level semantic structure present in both representations. Here we present a learned, end-to-end differentiable pipeline that augments both graphs with semantically motivated edge types encoding intra- and inter- level relationships, explicitly exploiting this hierarchy to enable simultaneous matching from high-level room concepts down to low-level wall surfaces. Trained exclusively on floor plans, the proposed method outperforms the combinatorial baseline in F1 on real LiDAR environments while running an order of magnitude faster, demonstrating viable zero-shot generalization for BIM-assisted robot localization.