Towards end-to-end co-design for one-shot printable task-specific soft robots
Organizations: Centre for Robotics · School of Electrical Engineering and Robotics · CSIRO Robotics, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Pullenvale, QLD 4069, Australia.
Abstract
Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.
Figures & tables
| Applied mass (g) | |||||
|---|---|---|---|---|---|
| Method | 10 | 20 | 40 | 90 | Mean |
| FEM 3-D | 0.25 | 0.24 | 0.21 | 0.51 | 0.30 |
| 2-D Plane Stress MPM | 0.25 | 0.29 | 0.35 | 0.68 | 0.39 |
| 2-D plane strain MPM | 0.41 | 0.55 | 1.1 | 2.5 | 1.1 |
Soft Robotics
Soft robotics studies robots with compliant bodies and actuators that deform to move, sense, and interact with uncertain environments.
See all 246 papers