cs.RONov 2, 2026

Towards end-to-end co-design for one-shot printable task-specific soft robots

Authors: James Wood, André Farinha, Will Browne, Josh Pinskier, Krishna Manaswi Digumarti

Organizations: Centre for Robotics · School of Electrical Engineering and Robotics · CSIRO Robotics, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Pullenvale, QLD 4069, Australia.

Abstract

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.

Figures & tables

Explore similar work

Mar 6, 2026

A Unified Low-Dimensional Design Embedding for Joint Optimization of Shape, Material, and Actuation in Soft Robots

Soft robots achieve functionality through tight coupling among geometry, material composition, and actuation. As a result, effective design optimization requires these three aspects to be considered jointly rather than in isolation. This coupling is computationally challenging: nonlinear large-deformation mechanics increase simulation cost, while contact, collision handling, and non-smooth state transitions limit the applicability of standard gradient-based approaches. We introduce a smooth, low-dimensional design embedding for soft robots that unifies shape morphing, multi-material distribution, and actuation within a single structured parameter space. Shape variation is modeled through continuous deformation maps of a reference geometry, while material properties are encoded as spatial fields. Both are constructed from shared basis functions. This representation enables expressive co-design while drastically reducing the dimensionality of the search space. In our experiments, we show that design expressiveness increases with the number of basis functions, unlike comparable neural network encodings whose representational capacity does not scale predictably with parameter count. We further show that joint co-optimization of shape, material, and actuation using our unified embedding consistently outperforms sequential strategies. All experiments are performed independently of the underlying simulator, confirming compatibility with black-box simulation pipelines. Across multiple dynamic tasks, the proposed embedding surpasses neural network and voxel-based baseline parameterizations while using significantly fewer design parameters. Together, these findings demonstrate that structuring the design space itself enables efficient co-design of soft robots.
Apr 20, 2025

Soft yet Effective Robots via Holistic Co-Design

Soft robots promise inherent safety via their material compliance for seamless interactions with humans or delicate environments. Despite progress, the field struggles to balance task-specific performance with broader factors like durability and manufacturability--a difficulty that we find is compounded by traditional sequential design processes with their lack of feedback loops. In this perspective, we review emerging co-design approaches that simultaneously optimize the soft robot's body and brain, enabling the discovery of unconventional designs highly tailored to the given tasks. Their adoption is limited by narrow objectives, gaps between simulated and real performance, and computational cost. To address these challenges, we propose a holistic co-design framework that incorporates a broader range of design values, integrates real-world prototyping to refine evaluations, and boosts efficiency through surrogate metrics and model-based control strategies. Finally, we outline research priorities in design priors and metrics, AI-assisted evaluation, and balancing computational refinement with physical testing and safety with performance.
Sep 1, 2026

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.