cs.CVNov 2, 2026

Coordinate Frame Recovery, Per Class NMS and Null Return Modelling for Sim2Real V2X LiDAR Detection

Authors: Aman Upganlawar

Organizations: Columbia University

Abstract

We describe our approach to the V2X-Real track of the UrbanTwin Sim2Real LiDAR Challenge, in which a 3D object detector must be trained exclusively on synthetic data and evaluated on unseen real roadside LiDAR from an Ouster OS1-64 unit, while the synthetic point clouds are simultaneously scored for distributional realism. Our final entry scores 0.7457 combined, from a detection mAP of 0.4382 and a realism score of 0.9251. Three findings account for most of our result, and all three were diagnostic rather than architectural. First, a coordinate frame mismatch between our predictions and the evaluation ground truth was suppressing detection AP entirely; recovering it took our score from 0.3520 to 0.5147 in a single submission. Second, a single global non maximum suppression threshold was destroying genuine pedestrian detections, because pedestrians occur in groups and a 0.3 IoU threshold applied to a 0.7 m box suppresses distinct neighbouring people; correcting this per class raised overall mAP from 0.0751 to 0.4295. Third, approximately 31 percent of the real reference point cloud consists of null returns encoded as the literal point (0, 0, 0), a format feature entirely absent from our synthetic clouds, which pinned Earth Mover's Distance near its floor until we modelled it. Negative results are reported at equal length, and Section 9 gives a full account of data provenance and compliance. That section also accounts for every mechanism contributing to the submitted score.

Figures & tables

Explore similar work

Nov 2, 2026

Geometric Refinement and Distributional Alignment for Sim2Real Roadside LiDAR Detection

We describe our approach to the LUMPI track of the UrbanTwin Sim2Real LiDAR Challenge, in which a 3D object detector must be trained exclusively on synthetic data and evaluated on unseen real roadside LiDAR, while the synthetic point clouds are simultaneously scored for distributional realism. Our final entry scores 0.4793 combined, from a detection mAP of 0.1333 and a realism score of 0.9126. Our contribution is not a new architecture. Working from a PointPillars baseline, we obtained most of our gains from three sources. First, a diagnosis that small object failure in roadside LiDAR is a localisation problem rather than a detection problem, which led to a parameter free geometric refinement worth 86 percent relative on pedestrian AP. Second, an audit of our own post processing which revealed that a shipped rule was destroying valid predictions, the repair of which produced our single largest detection gain at 335 percent relative on the Van class. Third, treating the realism metrics analytically rather than as a black box, which showed that one of the four components is a closed form function of nine summary statistics. We also report an experimental methodology that we believe is the more transferable result. Because mean AP decomposes into independent per class terms, a single submission can carry several mutually controlled experiments, and a submission assembled entirely from previously measured components has a score that is known before it is sent. We predicted our final score to four decimal places prior to submission. We report negative results at equal length, and give a full account of data provenance and compliance in Section 8, including a full account of every mechanism contributing to the submitted score.
Sep 7, 2026

Solution for UCF UrbanTwin LUMPI Track: Sim-to-Real Urban LiDAR 3D Object Detection

We present our solution to the LUMPI track of the UCF UrbanTwin Sim2Real LiDAR Challenge at the 6th DriveX Workshop, ECCV 2026. The detector must be trained only on synthetic data and is evaluated on 50 held-out real LiDAR frames; a separate 50-frame synthetic submission is evaluated for point-cloud realism. Our method addresses the Sim2Real gap at three levels. First, we align synthetic scans to the 50k-point test density and build a 30k-record training pool using UT-LUMPI geometry, RangeLDM-based sampling diversification, rare-class copy-paste, and pedestrian-oriented augmentation. Second, complementary DSVT detectors and Car/Bus PointPillars specialists are trained under the same synthetic-only constraint. Third, predictions are integrated by class-aware routing, asymmetric agreement fusion, constrained residual-recall supplementation, class-coverage auditing, and selective box-size calibration. The realism branch is optimized independently with radial-density matching, weak affine calibration, and calibrated set mixing. The final submission obtains a Combined Score of 0.4692, a Detection Score of 0.1797, a Realism Score of 0.9035, and 3D [email protected] of 0.1258.
Sep 7, 2026

Solution for UCF UrbanTwin V2X-Real Track: Sim-to-Real Urban LiDAR 3D Object Detection

Bridging the simulation-to-reality gap in roadside LiDAR requires addressing several coupled discrepancies, including scene geometry, sampling density, return patterns, and pedestrian scale. This report presents a multi-source collaborative training and class-aware fusion framework for Sim2Real 3D detection. The method organizes digital-twin scans, diffusion-redrawn scans, density-stabilized scans, and pedestrian morphology-aligned samples into a unified training pool with complementary roles. Within a common DSVT detection formulation, source-specialized expert branches preserve those roles while optimizing for the same detection objective. At inference, a predefined class-aware fusion pathway integrates geometry-stable and calibration-aware branches for vehicles, sampling-complementary branches for trucks, and morphology-consistent evidence for pedestrians. A label-free point-cloud center blend then refines geometric localization. On the UrbanTwin V2X-Real hidden test set, the unified system achieves a combined score of 0.7421, with 3D [email protected] of 0.4518 and a realism score of 0.8871. The results indicate that a stable, interpretable collaboration among data sources is more valuable than unconstrained aggregation of model outputs.