Mechanical Engineering Skills: An Open Library of Agent Skills for Design, Analysis and Manufacturing
Organizations: Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA · Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA · Machine Learning Department, Carnegie Mellon University, Pittsburgh, PA 15213, USA
Abstract
Mechanical engineers use specialized tools for CAD, simulation, manufacturing and research, each with a distinct interface and learning curve. We present Mechanical Engineering Skills, an open library of 33 agent skills that makes these capabilities accessible through a single text or voice conversation. Each skill combines operating instructions, executable tools and verification procedures. A language model interprets the request, selects and coordinates skills, while deterministic tools perform computations and return checked results. Default workflows require no tool-specific interface training, local model execution or model fine-tuning; skills load on demand and install with one command. Nineteen skills adapt published or preprint research from our laboratory, including text-to-CAD, linkage synthesis, CFD setup, stress-field and lattice surrogates, equation discovery, additive-manufacturing planning and in-process monitoring. Fourteen additional skills support core engineering and education. We describe the skill format, design principles and a method for translating research into practical workflows. Five case studies with explicit evidence scopes and independent reruns demonstrate exact analytical agreement for lattice homogenization, rocket apogee predictions within 4% of stored OpenRocket references, an equation fit nine times more accurate than a cubic polynomial at an unseen temperature, and an end-to-end rehearsal of porosity monitoring. Controlled agent comparisons remain future work. The open library is available at https://github.com/BaratiLab/mechanical-engineering-skills.
Figures & tables
| Skill | What you can ask for | Paper | |
|---|---|---|---|
| Design and CAD | |||
| cadsmith-text-to-cad | Describe a part in words; get a CadQuery model checked by exact geometry measurements and a three-view review, exported as STEP/STL. | [ 1 ] | |
| query2cad-freecad | Plain-language request to a FreeCAD macro, with automatic error repair and a visual self-check. | [ 2 ] | |
| parametric-part-cad | Part specification in plain English to a parametric CadQuery script, STEP/STL and a preview. | – | |
| sketch-to-cad | Hand sketch, photo or video frames to a dimensioned CAD model. | – | |
| drawing-gdt-review | Audit an engineering drawing for missing dimensions and GD&T errors. | – | |
| Input (voice or text) | What Claude does | Final result |
|---|---|---|
| voice “Size the output shaft and bearings for a 2 kW gearbox at 300 rpm, steel, safety factor two.” | machine-element-sizing Computes the torque (63.7 N m), sizes the shaft for combined bending and torsion fatigue, selects bearings for the required life and shows each step. | Shaft diameter and keyway, bearing designation and rated life, fatigue safety factors, and a calculation sheet. |
| text “Make an L-bracket for an M6 bolt pattern on 40 mm centres, 3 mm wall, printable without supports.” | cadsmith-text-to-cad , agentscad-fdm-dfam Writes a CadQuery model, measures it with the geometry kernel and a three-view check, then reorients it and adds teardrop holes and chamfers where overhangs need them. | Validated STEP and STL files, preview images and an overhang report. |
| voice “Will this aluminium bracket deflect more than half a millimetre under a 500 N tip load? (STEP attached)” | quick-fea Meshes the part, runs a linear static and a modal analysis, and compares the deflection with a beam hand calculation before answering. | A yes/no answer with deflection, peak stress, safety factor, first modes and the hand-check agreement. |
| text “Set up air flow over this heat-sink fin array at 2 m/s and tell me whether the result is converged.” | cfd-simulation-setup , thermal-fluids-calc Builds and runs an OpenFOAM case, checks residuals, conservation and mesh sensitivity against registered criteria, and estimates the heat-transfer coefficient from correlations as a cross-check. | The case files, an accept-or-rerun decision with reasons, and pressure drop and heat transfer compared with the correlation. |
| voice “I need a lattice infill for a 10 mm cell, about 2.5 times stiffer vertically than sideways, as light as possible, in PLA.” | lattice-inverse-design Asks for the absolute stiffness and minimum wall, searches homogenized TPMS and hybrid cells, refines thickness and re-checks the best cell at higher resolution. | The cell, its full stiffness matrix and weakest-direction modulus, and a tiled watertight STL (Fig. 3 ). |
| voice “I’m building a 98 mm rocket for an H motor. Will it be stable, and how high will it go?” | rocketsmith Computes the centre of pressure by Barrowman’s method, sizes the fins to the target stability, simulates the flight and checks rail-exit speed, thrust-to-weight and certification level. | Stability margin, predicted apogee and peak speed, a pass/fail checklist, and printable nose cone and fin can. |
| Voxels | Volume fraction | |||
|---|---|---|---|---|
| 0.2549 | 0.0551 | 0.0556 | 0.1406 | |
| 0.2605 | 0.0578 | 0.0573 | 0.1473 | |
| 0.2598 | 0.0573 | 0.0577 | 0.1506 |
| Model | Train | In-domain | Held-out temperature |
|---|---|---|---|
| Discovered eight-parameter skeleton | 0.02096 | 0.02464 | 0.07362 |
| Cubic polynomial | 0.16141 | 0.14952 | 0.67952 |
| Linear regression | 0.38018 | 0.37661 | 1.31432 |
| Workflow | What the evidence establishes | Where it stops |
|---|---|---|
| Lattice | Exact solid and laminate agreement; resolution sensitivity; search result re-homogenized | No full-scale diffusion training or physical coupon tests |
| RocketSmith | Apogee and velocity within 4% of stored OpenRocket references | Reconstructed geometry; OpenRocket not rerun; no new flight |
| ThermoPore | Complete preprocessing, labelling and baseline pipeline on synthetic data | No source pyrometry/CT data; deep-model accuracy not reproduced |
| SLS | ASTM data reduction; 11 chronological replays with directional agreement | Retrospective; no outcomes for unprinted suggestions |
| LLM-SR | Discovered skeleton and baselines refitted on the original benchmark files | Original model-driven search not rerun; held-out split is interpolation |
Tool-Augmented Language Model Agents
Tool-augmented language model agents use external tools, APIs, and environments to solve tasks beyond text generation alone.
See all 175 papers