cs.RONov 5, 2026

Data-Driven Configuration of Protective Separation Zones in Collaborative Robot Cells from Operator Occupancy

Authors: Aulon Bajrami, Theo Jacobs, Werner Kraus

Organizations: Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Stuttgart, Germany

Abstract

The protective separation zone of a collaborative robot cell is commonly dimensioned for a worst case that disregards where the operator is actually present during the task. This paper presents a camera-based, data-driven method that configures this zone from observed operator occupancy. Operator positions accumulated over several production shifts are aggregated into an occupancy heatmap, from which a protective field is derived that trades off the achievable robot velocity against the required safety distance, following the speed and separation monitoring principle of ISO/TS 15066. The resulting configuration is advisory, that is, reviewed within the risk assessment rather than applied autonomously to the robot controller. The method, which builds on a pose-based perception pipeline with activity recognition, was evaluated in two operational cells at two industrial partners, where the protective field could be reduced by approximately 17% and a productivity increase of 9% was measured. However, adoption proved to depend on more than the demonstrated gain alone.

Figures & tables

Explore similar work

Jun 11, 2026

Embedding ISO 10218 Safety Compliance in Robots via Control Barrier Functions for Human-Robot Collaboration

Human-Robot Collaboration (HRC) requires strict adherence to safety standards, such as ISO 10218, to prevent harmful interactions. Standard Speed and Separation Monitoring (SSM) filters calculate safe robotic speeds based on conservative assumptions, such as constant human velocity, which prevents accurate predictions of minimum separation distances and causes unnecessary operational halts. This paper proposes a Control Barrier Function (CBF) that explicitly incorporates human acceleration data to analytically forward-predict the minimum human-robot separation distance during a worst-case robotic stopping trajectory. To guarantee safety at the control level, this predictive CBF is integrated as an inequality constraint within a Sequential Quadratic Programming (SQP) framework. Specifically, two methods are proposed: Method I, a CBF-constrained PD safety filter; and Method II, a task-scaling SQP controller that enforces a spatial tube constraint. Simulated and real-world experiments on a UR10e robot evaluate the two proposed methods against a standard industrial SSM module baseline. Results demonstrate that Method II dynamically modulates execution speed and confines spatial deviations. Compared to Method I, Method II achieves a 63% reduction in mean trajectory error and avoids excessive evasive manoeuvres, ensuring high task throughput while complying with ISO 10218 SSM guidelines.
Sep 30, 2024

Adaptive Collision Sensitivity for Efficient and Safe Human-Robot Collaboration

What is considered safe for a robot operator during physical human-robot collaboration (HRC) is specified in corresponding HRC standards (e.g., ISO 10218-2:2025). The regime that allows collisions between the moving robot and the operator, called Power and Force Limiting (PFL), restricts the permissible contact forces. Using the same fixed contact thresholds on the entire robot surface results unnecessary productivity losses, as the robot needs to stop even when impact forces are within limits. Here we present a framework that decides whether the robot should interrupt motion based on estimated collision force computed individually for different parts of the robot body and dynamically on the fly, based on the Effective Mass (EM) of each robot link. We performed experiments on a simulated and real collaborative robot arm (UR10e) with sensitive skin (AIRSKIN) for collision detection and isolation. To demonstrate the generality of our method, we added experiments on simulated KUKA LBR iiwa robot, where collision sensing draws on joint torque sensing. On a mock pick-and-place scenario with both transient and quasi-static collisions, we show an increase in productivity over 45% from using the standard approach. The method is applicable to any robot for which the EF can be calculated.
May 5, 2026

Jiao: Bridging Isolation and Customization in Mixed Criticality Robotics

Consumer robotics demands consolidation of safety-critical control, perception pipelines, and user applications on shared multicore platforms. While static partitioning hypervisors provide hardware-enforced isolation, directly transplanting automotive architectures encounters an expertise asymmetry problem in which end-users modifying robot behavior lack the systems knowledge that platform developers possess. We present an architecture addressing this challenge through three integrated components. A Safe IO Cell provides hardware-level override capability. A Parameter Synchronization Service encapsulates cross-domain complexity. A Safety Communication Layer implements IEC61508-aligned verification. Our empirical evaluation on an ARM Cortex-A55 platform demonstrates that partition isolation reduces cycle-period jitter by 84.5% and cuts tail timing error by nearly an order of magnitude (p99 ∣|jitter∣| from 69.0,μμs to 7.8,μμs), eliminating all >>50,μμsexcursions.