Monocular depth foundation models make it tempting to replace depth sensors on mobile robots with a single RGB camera. We show that, used off the shelf, this is unsafe: in a simulated indoor navigation benchmark, a standard Nav2 stack driven by Depth Anything V2 (metric) collides in 63% of 120 episodes, because the model systematically over-estimates the distance to nearby obstacles. We propose a lightweight plug-in module that turns predicted depth into safe depth. A 0.58,M-parameter head on top of the frozen depth model predicts, per pixel, a log-depth correction μ and an uncertainty σ, trained with a β-weighted Gaussian negative log-likelihood. The navigation stack consumes the one-sided bound d^safe=deμ−kσ, where k is set by conformal calibration on a held-out world, and uncertainty also decides which pixels may be treated as floor. The correction halves the depth error (AbsRel 0.262→0.134) and reduces near-range over-estimation from 59.8% to 12.0%. In navigation, safe depth raises the success rate from 37% to 70% and lowers collisions from 63% to 3%, close to the 2% of ground-truth depth. A constant safety margin calibrated to the same pixel coverage reaches only 30% success because it freezes the robot; uncertainty-aware safety wins 52 of 56 discordant paired episodes against it. Gains hold on glass, texture-less walls and dark regions.
Safe robot navigation develops methods for reaching goals while avoiding collisions and managing uncertainty, dynamic obstacles, and environmental hazards.