cs.RONov 11, 2026

Elastra: A Simulation Framework for Elastic Bodies

Authors: Youran Sun, Chugang Yi, Xingyu Ren, Haizhao Yang

Organizations: University of Maryland, College Park · The Chinese University of Hong Kong

Abstract

When robots interact with elastic surfaces such as mattresses and trampolines, changes in loading cause the surfaces to deform and rebound, altering subsequent contact locations and forces. We present Elastra, a simulation framework for modeling this interaction and supporting the training and evaluation of robot control policies. Elastra represents each surface using elements that move only vertically, with elastic connections and damping to model deformation and recovery. Contact forces drive surface motion, and the updated surface geometry is used to compute subsequent contact forces. We systematically validate our simulations against an independent implementation and a real mattress load curve. We further use Elastra to train the Unitree G1 humanoid to stand up on mattresses and trampolines. Using the pretrained HoST policy and ProtoMotions motion tracker as original controllers, we train residual policies through reinforcement learning to add corrections to their joint targets. Adding these residual policies increases the success rate with HoST from 44.1% to 72.5%, and from 55% to 89% on the trampoline. With ProtoMotions, the success rate increases from 19.0% to 45.0% for initial poses not encountered during training. The code and video are available on https://github.com/yichg/elastra.

Figures & tables

Explore similar work

Aug 21, 2026

Demonstration-Guided Humanoid Stand-Up on an Emulated Deformable Surface

This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.
Aug 20, 2026

MILD: Tractable Terrain Modeling for Learning Improved Bipedal Locomotion on Deformable Surfaces

Enabling robots to walk on yielding terrain is vital for applications ranging from disaster response to planetary exploration. While bipedal robots hold immense potential, their locomotion on deformable surfaces remains limited as current simulators fail to capture the spatiotemporal heterogeneity of such yielding substrates. We present MILD, featuring a physics-grounded discrete-element contact solver that accurately simulates spatially varying foot-terrain interactions. Complementing this model, we train a terrain-aware locomotion controller via deep reinforcement learning with latent modulation and proprioceptive estimation. Quantitative comparisons against state-of-the-art methods show our approach generates more diverse and realistic contact scenarios during training, resulting in controllers that exhibit natural adaptation on real deformable surfaces. Through hardware experiments, we demonstrate the system's capability for online terrain identification and adaptation across a wide range of surface stiffness.
Jul 25, 2026

Sling2Sim2Real: One-Shot Elastic System Identification for Non-Destructive Slingshot Policy Learning

Elastic object manipulation (EOM) involves highdimensional, nonlinear, and elastic deformations. The diverse deformation properties of elastic objects substantially expand the relevant state space, requiring extensive exploration to learn accurate manipulation policies for tasks such as slingshot manipulation. While simulation enables large-scale and safe exploration compared to costly and potentially destructive real-world trials (e.g., repeated projectile launches), accurately calibrating elastic behavior between the real world and simulation remains challenging since elastic properties are largely indistinguishable from visual observations alone. To address these challenges, we propose Sling2Sim2Real, a one-shot Real2Sim2Real framework that identifies elastic parameters from a single non-destructive interaction and enables policy learning in simulation. The framework consists of two stages: 1) a multi-start Real2Sim system identification method that exploits parameter covariance to estimate elastic properties, and 2) simulation-based policy learning followed by zero-shot Sim2Real transfer using the calibrated simulator. We evaluate Sling2Sim2Real on a slingshot manipulation task using a Franka Emika Panda arm and elastic bands with diverse physical properties across varying target distances. Experimental results demonstrate that Sling2Sim2Real achieves accurate policy learning and robust generalization while significantly reducing the amount of required real-world interaction.