cs.CVNov 12, 2026

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

Authors: Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach

Organizations: Mines Paris, PSL University Centre for robotics (CAOR) 75006 Paris, France · ChapsVision 4 Rue du Port aux Vins, 92150 Suresnes, France

Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

Figures & tables

Appendix figures & tables18 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Jul 16, 2026

Image-to-Point Cloud Registration Made Easy with Rectified Flow-based LiDAR Upsampling

Image-to-Point Cloud Registration (I2P) is essential for integrating camera and LiDAR in perception and autonomous systems, yet the modality gap between images and point clouds makes it difficult to achieve both high accuracy and strong generalization. In this paper, we propose a simple yet effective I2P method that treats LiDAR as an imaging sensor: from a single sparse LiDAR scan, we generate a dense LiDAR intensity image using Conditional Rectified Flow, match it with a camera image using a pre-trained feature matcher, and estimate the 6-DoF relative pose via PnP-RANSAC. The proposed model is pre-trained through a self-supervised image completion task and fine-tuned on a small amount of LiDAR data (neither image-point cloud pairs nor ground-truth sensor poses are required), enabling it to scale to diverse LiDAR and camera configurations. Experiments on the R3LIVE dataset show that the proposed method achieves a mean error of 4.89° / 1.63 m, outperforming existing methods, while completing a single registration in approximately 0.68 s.
Aug 20, 2026

CVSD-Reg: Cross-Modal Visual Semantic Prior Distillation for Robust LiDAR Registration

Learning-based global point cloud registration has achieved remarkable progress, yet its reliance on geometric representations makes existing methods sensitive to variations in point density, scan pattern, viewpoint, and sensor characteristics. We propose CVSD-Reg, a robust global LiDAR registration framework that distills visual semantic priors from a vision foundation model into LiDAR representations. In Stage 1, a Point Transformer V3 student learns from a frozen DINOv2 teacher through contrastive distillation and spherical-manifold alignment, which preserves the hyperspherical geometry of the teacher embedding space. Self-supervised InfoNCE consistency and soft SE(3)\mathrm{SE}(3) invariance further encourage viewpoint-robust descriptors. In Stage 2, the distilled representation is adapted to registration through correspondence learning, density-aware point-dropout augmentation, and end-to-end pose optimization. With a single checkpoint, CVSD-Reg generalizes to both single-sensor and zero-shot cross-sensor scenarios without sensor-specific adaptation and remains entirely camera-free at inference. On KITTI, nuScenes, and HeLiPR, CVSD-Reg achieves strict success rate ([email protected],m/1∘1^\circ) of 97.7%\%, 99.0%\%, and 99.3%\%, respectively, including 97.3%\% on sparse 16-beam Velodyne scans. It outperforms state-of-the-art geometric registration methods by up to 44.0 percentage points without requiring camera inputs or post-hoc ICP refinement.
Sep 19, 2026

ZIL: Zero-shot Image-to-LiDAR Registration

Image-to-LiDAR registration estimates the camera pose of an image with respect to a LiDAR point cloud. It has diverse applications in autonomous driving, robot navigation etc. However, state-of-the-art (SOTA) methods still 1) mostly assume same-frame inputs, struggling with the image and point cloud from distant frames; 2) rely on domain-specific training, failing to generalize to unseen scenarios. We propose ZIL, the first foundation model for zero-shot non-synchronized image-to-LiDAR registration. ZIL encodes the input image and point cloud with the Vision and Point Transformers. In addition to regressing the relative pose, ZIL also learns to predict 3D coordinates, which substantially improves the pose accuracy without additional annotations. Interestingly, naive mix-data training cannot enable zero-shot generalization, which requires normalization on both camera intrinsics and the LiDAR vertical-axis origin. Trained on 7 public datasets with 1.4M LiDAR frames, ZIL consistently and significantly outperforms previous SOTA with a single model across 5 in-domain and zero-shot benchmarks, reducing the translation and rotation errors by up to 87% and 76% (shown in Fig. 1). Code and models are available at https://github.com/ZijunLi7/ZIL.