cs.CVNov 14, 2026

AcousticBEV: Acoustic BEV Object Localization for Intelligent Vehicles

Authors: Ziang Liu, Shiming Wang, Joseph Adeola, Julian F. P. Kooij

Abstract

Modern autonomous driving and driver assistance systems rely predominantly on cameras, radars and LiDARs for environmental perception. However, these modalities face different environmental limitations, including poor illumination for cameras and adverse weather for LiDAR. Acoustic sensing, particularly using microphone arrays, could provide complementary perception capabilities for autonomous driving, but has remained largely underexplored. In this work, we design a horizontally arranged microphone array that functions as the "ears" of a vehicle, enabling localization of nearby moving vehicles in a bird's-eye view (BEV) representation that captures both their relative direction and distance. Using this array, we collect a real-world driving dataset, AcousticScenes, which contains 2,117 static and 2,863 dynamic samples with synchronized spatial acoustic signals, LiDAR point clouds and 3D bounding box annotations. Building on this dataset, we propose AcousticBEV, a learning-based method for acoustic BEV object localization, which estimates the center locations of moving traffic participants in BEV from the microphone-array signals, conditioned on the ego vehicle's own speed. Experimental results demonstrate that AcousticBEV outperforms both classical signal-processing baselines and other learning-based methods, achieving F1 scores of 47.7±1.247.7 \pm 1.2% on "Easy" scenarios and 45.1±1.445.1 \pm 1.4% on "Difficult" cases. Our findings demonstrate that acoustic signals from a low-cost, vehicle-mounted microphone array can localize nearby moving vehicles in both azimuth and distance.

Figures & tables

Explore similar work

Nov 10, 2026

Spatio-Temporal Calibration of a Vehicle-Mounted Microphone Array for Autonomous Driving

Microphones let an autonomous vehicle sense into areas its cameras and LiDAR cannot see, by picking up the sound that other traffic participants emit. Locating those sources and fusing them with the visual perception requires the microphone array to be calibrated and registered relative to the vehicle's other sensors. Existing calibration methods assume small, unobstructed indoor rigs, whereas a vehicle body casts an acoustic shadow that straight-line propagation cannot represent, and to our knowledge no calibration of an array distributed around a vehicle has been reported. We propose a pipeline that uses a balloon burst as a single cross-modal target, which the LiDAR locates in metric coordinates, every microphone hears as a sharp onset and a camera times. Each observation is weighted by its own timing variance, which discounts shadowed arrivals instead of discarding them and needs no model of the vehicle. On a full-size vehicle with eight microphones over a 4.9 m aperture, the held-out range residual of 6.37 cm approaches the 6.07 cm floor set by the onset timing noise, and the calibrated array tracks a moving source to within a few degrees of the vehicle's own LiDAR. A dozen bursts spread around the vehicle suffice, and spreading them matters more than adding more.
Sep 19, 2026

Planning-Aligned Pretraining of BEV Representations with Sparse Action-Conditioned Targets for End-to-End Autonomous Driving

End-to-end driving requires planning-relevant bird's-eye-view (BEV) representations, but existing pretraining approaches often rely on task annotations or dense scene reconstruction. We introduce PAVER, Planning-Aligned BEV Encoder Pretraining. From a single LiDAR sweep, PAVER constructs sparse risk and unknown targets describing occupied and unobserved evidence along rule-based ego motions. A 10K-parameter head predicts these targets from masked BEV features conditioned on the action state, directing supervision toward geometric constraints on candidate motions. Pretraining requires no driving-task annotations or dense reconstruction. Only the BEV encoder is transferred, preserving the downstream architecture and camera-only inference. On nuScenes, PAVER reduces VAD-Tiny's average collision rate from 0.51% to 0.19%, while improving planning L2, motion prediction, detection, and mapping. The selected VAD-Tiny and VAD-Base schedules use about 36% less estimated total training time than scratch training, including pretraining. On Bench2Drive Town05 Long, PAVER improves UniAD-Tiny's closed-loop Driving Score from 48.45 to 58.79. The project page is available at https://archiiive99.github.io/PAVER.
Sep 21, 2026

Audio-based UAV Localization with Adaptive Temporal Correspondence via Reinforcement Learning

Audio-based localization provides a low-cost and illumination-independent sensing solution for anti-UAV early warning. However, existing methods typically rely on a predefined fixed audio segment length, which limits temporal correspondence and creates a trade-off between sufficient acoustic evidence and timely localization. To address this issue, we propose an audio-based localization framework with adaptive temporal correspondence. A probe segment is first used to extract a compact acoustic state that characterizes the reliability and consistency of the observation. Guided by the state, a reinforcement learning controller dynamically determines the required audio window size for each localization decision. The selected audio segment is then processed by a Mamba-based localization network with adaptive temporal feature modulation for 3D position estimation. Extensive experiments demonstrate that our method achieves competitive 3D localization accuracy with substantially reduced temporal correspondence latency compared to SOTA methods and exhibits strong generalization across scenarios.