cs.RONov 17, 2026

DGV-DLIVO: Degeneracy-Guided Visual Fusion for Direct LiDAR-Inertial-Visual Odometry in Degenerate Tunnel Environments

Authors: Junrui Zhang

Organizations: The Department of Electronic and Information Engineering, Tongji University, Shanghai, 200092, China.

Abstract

Reliable localization in long underground infrastructures remains a major challenge for autonomous inspection robots. In hydropower spillway tunnels and drainage galleries, repetitive geometric structures provide insufficient constraints along the tunnel axis, while weak texture and illumination variations further degrade visual estimation. Under this coupled degradation, existing LiDAR-inertial and visual-inertial odometry systems may lose the ability to recover continuous longitudinal motion. This paper presents DGV-DLIVO, a degeneracy-guided visual fusion for direct LiDAR-inertial-visual odometry for extreme tunnel environments. Instead of treating vision as a general complementary sensor, the proposed method exploits the LiDAR-degenerate direction as an active guidance signal to determine informative visual regions, establish LiDAR-anchored visual associations, and perform subspace-selective fusion. The visual constraints are introduced only into the deficient motion subspace, while unreliable LiDAR information in the same direction is adaptively suppressed and reliable geometric constraints are preserved. Real-world experiments in hydropower tunnels demonstrate that representative state-of-the-art LIO, LIVO, and VIO methods suffer from stagnation, oscillation, severe under-travel, curved drift, or divergence, whereas DGV-DLIVO maintains continuous and directionally consistent tunnel-axis motion estimation under both cart-mounted and handheld acquisition. It achieves a 91.4% progress ratio over the 40m tunnel sequence and significantly improves longitudinal recovery and trajectory stability. These results demonstrate the effectiveness of degeneracy-guided adaptive fusion for robotic inspection in severely degraded underground environments. The source code and a supplementary video are publicly available at https://github.com/0RayZhang0/DGV-DLIVO.

Figures & tables

Explore similar work

Jun 24, 2026

SA-LIVO: Efficient LiDAR-Inertial-Visual Odometry with Subspace-Aware Degeneracy Handling

Light detection and ranging (LiDAR)-inertial-visual odometry fuses geometric depth with visual measurements, but its sensors fail independently: LiDAR in under-constrained geometry, vision under poor illumination or texture. Weak information is harmless, since the filter then relies on the other sensor or the inertial prediction; over-confident information is not. Existing countermeasures act on weak information or switch vision by hand-set thresholds. This article presents SA-LIVO, which fuses vision through explicit, online-estimated error models. A frame-level noise scale, estimated by covariance matching, absorbs whole-image errors, and Schmidt filtering carries the correlation of reused observations. Subspace-aware information fusion models the error shared by a frame's observations as a pose offset capping the visual information per direction; the exact fusion attenuates vision only above that cap and reduces to the information sum when the visual model is consistent. LiDAR and visual residuals share one invariant extended Kalman filter loop. On 24 handheld and aerial sequences, SA-LIVO is the most accurate or tied on 22 and stays bounded where others diverge; on the HILTI 2022 benchmark it needs 13.4 ms per frame on a laptop processor and 2.0-6.2x less memory than FAST-LIVO2, R3LIVE, and SR-LIVO.
Jun 17, 2026

FAST-LIVGO: A Degeneracy-Robust LiDAR-Inertial-Visual-GNSS Fusion Odometry

Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative constraints without augmenting historical anchor states. We further design a degeneracy-aware dual-mode outlier rejection strategy that switches between LIVO-prior-guided rejection and GNSS-aided recovery according to the LIVO degeneracy level. Experiments on the public M3DGR dataset and a custom 20~m/s fixed-wing UAV dataset demonstrate that our system reduces accumulated drift and map ghosting, outperforming state-of-the-art methods in accuracy and robustness.
Mar 19, 2026

Benchmarking Visual Feature Representations for LiDAR-Inertial-Visual Odometry Under Challenging Conditions

Accurate localization in autonomous driving is critical for successful missions including environmental mapping and survivor searches. In visually challenging environments, including low-light conditions, overexposure, illumination changes, and high parallax, the performance of conventional visual odometry methods significantly degrade undermining robust robotic navigation. Researchers have recently proposed LiDAR-inertial-visual odometry (LIVO) frameworks, that integrate LiDAR, IMU, and camera sensors, to address these challenges. This paper extends the FAST-LIVO2-based framework by introducing a hybrid approach that integrates direct photometric methods with descriptor-based feature matching. For the descriptor-based feature matching, this work proposes pairs of ORB with the Hamming distance, SuperPoint with SuperGlue, SuperPoint with LightGlue, and XFeat with the mutual nearest neighbor. The proposed configurations are benchmarked by accuracy, computational cost, and feature tracking stability, enabling a quantitative comparison of the adaptability and applicability of visual descriptors. The experimental results reveal that the proposed hybrid approach outperforms the conventional sparse-direct method. Although the sparse-direct method often fails to converge in regions where photometric inconsistency arises due to illumination changes, the proposed approach still maintains robust performance under the same conditions. Furthermore, the hybrid approach with learning-based descriptors enables robust and reliable visual state estimation across challenging environments.