Technical Report of Mobile Manipulator Robot for Industrial Environments
Organizations: Team Auriga, Faculty of Electrical Engineering, Shahid Beheshti University, Tehran, Iran
Abstract
This paper presents the design and implementation of Auriga Robotics' mobile manipulator robot, developed at the Robotics and Intelligent Automation Laboratory, Department of Electrical Engineering, Shahid Beheshti University. Hereafter, this platform is referred to as the @Work Robot. The robot targets industrial tasks, with an emphasis on improving efficiency in repetitive or hazardous work environments. It uses a 4-wheel Mecanum drive for omnidirectional movement and a 5-degree-of-freedom manipulator arm with a 3D-printed gripper for object handling and navigation. The electronics consist of custom PCB boards built around ESP32 microcontrollers, together with an NVIDIA Jetson Orin NX that handles high-level processing and real-time system control. On the software side, Hector SLAM provides mapping and localization, A* handles path planning, and YOLO performs real-time object detection. These modules draw on fused sensor data to deliver robust navigation and reliable collision avoidance. Overall, the system shows effective hardware-software integration, with consistent performance in autonomous navigation, object handling, and task execution in industrial-like settings.
Figures & tables
| Topic | Message Type | Direction | TCP Port |
|---|---|---|---|
| /atwork_commander/task | Task | Refbox Robot | 9673 |
| /atwork_commander/object_task | ObjectTask | Refbox Robot | 9672 |
| /atwork_commander/robot_state | RobotState | Robot Refbox | 9671 |
| Node | Package | Primary Function |
|---|---|---|
| decision_making | decision_making | Receives the atwork_commander task order and publishes an optimized, robot-specific task sequence (single-shot). |
| main | navigationing | Central finite-state-machine orchestrator: navigation, localization, and coordination of perception and actuation. |
| esp_comms | navigationing | Serial bridge to the drivetrain/sensor microcontroller over UART; translates between ROS topics and the serial packet protocol. |
| camera_node | arm | Acquires synchronized RGB-D frames from the RealSense D455 and exposes them via shared memory. |
| vision_node | arm | Performs detection and LiDAR-based mapping; publishes results on /vision_out and follows commanded state via the parameter server. |
| Mechanism | Used Between | Purpose |
|---|---|---|
| ROS topics (custom msgs) | decision_making main | One-shot transfer of the resolved task sequence ( decision ). |
| ROS topics (std_msgs) | main esp_comms | Continuous actuation commands and sensor telemetry ( motor4 , arm_datas , encoder4 , VL , cmps ). |
| ROS topics (std_msgs) | vision_node main | Continuous perception output ( /vision_out ). |
| ROS parameter server | main vision_node | Low-latency perception mode/target/pose commanding and state polling. |
| ROS parameter server | esp_comms main | Arm-response status flag. |
| POSIX shared memory | camera_node vision_node | High-bandwidth RGB and depth frame transfer, bypassing ROS serialization. |
| Object | Dimensions | Weight (g) | Trials | Successes | Success Rate (%) |
|---|---|---|---|---|---|
| Small Aluminum Profile | 20 20 100 mm | 50 | 20 | 19 | 95 |
| Large Aluminum Profile | 40 40 100 mm | 185 | 20 | 18 | 90 |
| Screw | M20 100 mm | 295 | 20 | 16 | 80 |
| Small Nut | M20 | 55 | 20 | 9 | 45 |
| Large Nut | M30 | 215 | 20 | 11 | 55 |
| Steel Axis | 68 M20 | 160 | 20 | 15 | 75 |
Mobile Manipulation
Mobile manipulation studies robots that navigate through environments while using arms or other effectors to interact with objects.
See all 102 papers