This paper presents the development of an initial full-vehicle simulation model of the PixKit modular electric test platform in IPG CarMaker. The objective is to create a physics-based and extendable model structure that can serve as a low-level foundation for future digital twin applications. The reference vehicle is a skateboard chassis combining unconventional vehicle characteristics such as four independent wheel-hub motors and rear axle steering capable of high steering angles. Since complete measurement data of the vehicle is not yet available, the model parameterization is based on a combination of manufacturer documentation, derived values and engineering assumptions. The modeling approach focuses on the system-level integration of the main vehicle subsystems rather than on a fully validated representation. The resulting model was assessed through basic driving scenarios with different steering inputs and configurations. The simulations showed stable model behavior and physically plausible interaction between the subsystems. The all-wheel-drive configuration produced symmetric wheel responses in longitudinal driving, while counter-phase rear axle steering increased the yaw response and reduced the simulated turning circle diameter compared with front axle steering only. The circular driving scenario further indicated bounded roll and slip behavior. Overall, the implemented CarMaker model provides a traceable and functional simulation basis for the PixKit vehicle. It can support future model refinement, calibration with real vehicle data and development with the goal of creating a validated digital twin architecture.
Figures & tables
Figure 1: PixKit skateboard chassis. Documented dimensions: length 2510 mm, width 1700 mm, height 646 mm, wheelbase 1900 mm, front/rear track width 1465 mm [ 2 ]
Figure 2: Top and side view of the PixKit visualization.
Figure 3: Visualization of the PixKit in MovieNX with the additional steering-angle markers.
Figure 4: Speed and acceleration during the straight-line maneuver.
Figure 5: Powertrain response during the straight-line maneuver.
Figure 6: Mean axle steering angle during maximum steering input maneuver.
Figure 7: Yaw rate comparison during minimum turning circle maneuver.
Figure 8: Trajectory comparison during minimum turning circle maneuver.
Figure 9: Mean axle steering angle during steady-state circular driving.
Figure 10: Lateral vehicle response during steady-state circular driving.
In efforts to increase research efficiency and availability, a digital twin of our research tractor (AMX G-trac) is created, focusing especially on the CAN communication for data reading and actuation command following the ISOBUS protocol. Mevea Simulation Software is utilized as the foundation, providing the kinematic model and visuals, while Python is used to read and write CAN messages over a Kvaser CanKing virtual CAN channel. Various performance tests involving straight line and turning behavior are performed in both the digital twin simulation and in the real world to measure similarity. Results indicate that the Mevea model behaves very comparable in its lateral dynamics, often within 5-10 percent, but requires better data to fully capture the longitudinal aspects like acceleration. The final model described in this paper sets the table for a second iteration to include more tractor functions such as hydraulics and tractor-implement dynamics.
Clay Hallman, Lukas Pindl, Timo Oksanen
Technical University of Munich, Germany; Professorship of Agrimechatronics; Munich Institute of Robotics and Machine Intelligence (MIRMI)
We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.
Nicola Musiu, Francesco Iacovacci, Fausto Lupo +11
University of Modena and Reggio Emilia, Modena, Italy · Megaride S.r.l., Naples, Italy · University of Naples Federico II, Naples, Italy +1
Simulation is one of the most essential parts in the development stage of automotive software. However, purely virtual simulations often struggle to accurately capture all real-world factors due to limitations in modeling. To address this challenge, this work presents a test framework for automotive software on the centralized E/E architecture, which is a central car server in our case, based on Vehicle-in-the-Loop (ViL) and digital twin technology. The framework couples a physical test vehicle on a dynamometer test bench with its synchronized virtual counterpart in a simulation environment. Our approach provides a safe, reproducible, realistic, and cost-effective platform for validating autonomous driving algorithms with a centralized architecture. This test method eliminates the need to test individual physical ECUs and their communication protocols separately. In contrast to traditional ViL methods, the proposed framework runs the full autonomous driving software directly on the vehicle hardware after the simulation process, eliminating flashing and intermediate layers while enabling seamless virtual-physical integration and accurately reflecting centralized E/E behavior. In addition, incorporating mixed testing in both simulated and physical environments reduces the need for full hardware integration during the early stages of automotive development. Experimental case studies demonstrate the effectiveness of the framework in different test scenarios. These findings highlight the potential to reduce development and integration efforts for testing autonomous driving pipelines in the future.
Chengdong Wu, Sven Kirchner, Nils Purschke +9
Technical University of Munich, Garching, Bayern, Germany · CARIAD SE, Germany