cs.RONov 18, 2026

Teleoperated Haircutting with Delay Compensation and Passivity-Based Control for Unilateral Internet Teleoperation under Real Communication Uncertainties

Authors: Viridiana Luna-Zempoalteca, Zhendai Huang, Rosalba Galvan-Guerra, Antonio Rosales, Xiaoli Liu, Shuai Li

Organizations: Steven · Instituto Politécnico Nacional, Mexico. · University of Oulu, Oulu, Finland. · VTT Technical Research Centre of Finland, Oulu, Finland. · 

Abstract

Robotic haircutting requires accurate motion execution and reliable communication to safely reproduce the operator's commands. Internet-based teleoperation is a key enabling technology to remotely perform precise manipulation tasks such as haircutting. However, communication uncertainties, including variable transmission delays and packet jitter, degrade synchronization between the master and slave systems and affect tracking performance. This paper presents a unilateral Internet teleoperation framework for robotic haircutting that takes into account experimentally measured communication uncertainties. Three delay-compensation techniques, namely Zero-Order Hold (ZOH), First-Order Hold (FOH), and Low-Pass Filtering (LPF), are evaluated together with a classical proportional-derivative (PD) controller and a passivity-based synchronization controller. Unlike conventional studies based on synthetic delay models, the proposed framework is validated using communication data acquired from a real cloud-based teleoperation platform, where both packet delay and effective delay are characterized. The results demonstrate that combining delay-compensation techniques with passivity-based synchronization improves the robustness of unilateral Internet teleoperation under realistic communication uncertainties, providing a reliable control framework for robotic haircutting applications.

Explore similar work

Oct 5, 2026

TeleHairing: A Teleoperation Baseline for Robotic Haircutting

Robotic haircutting requires controlled tool motion near the head while simultaneously accounting for communication, visual feedback, tool actuation, and interruption handling. Existing studies still lack an operator-in-the-loop reference for analyzing these coupled behaviors before human trials or stronger autonomy. This paper presents TeleHairing, a closed-loop teleoperation architecture for mannequin-based robotic haircutting evaluation under local, relay, and remote deployment conditions. Logged timing shows that the main remote latency increase occurs before the robot-side control endpoint: overall timing reached 190.5~ms in remote mode, while robot-side command queue, control processing, and control-to-robot timing remained similar across modes. Trajectory analysis shows that the larger remote command-following error was dominated by the terminal withdrawal segment rather than accumulated uniformly over the path; excluding this segment reduced remote root-mean-square error (RMSE) from 45.1 mm to 9.6 mm. Detection-loss trials further show that rebase events resumed motion without a large target jump under the tested condition. These results clarify how deployment, execution, and interruption affect the robotic haircutting teleoperation loop, providing a quantitative reference for future autonomy, safety, and user-facing studies.
Aug 20, 2026

Wave-Based Bilateral Teleoperation between Nonlinear Manipulators with Direct Contact Force Feedback

We study bilateral teleoperation between nonlinear, multi-DOF robotic manipulators in the presence of constant communication delays. Unlike classical wave-transformation architectures that transmit a coordinating force, we consider the case where the environmental force is reflected to the master side to enhance teleoperation transparency. Since direct contact force feedback might destabilize the closed-loop system, we first develop a passivity-shortage characterization for the Euler--Lagrange remote system using a linear matrix inequality (LMI) approach. An upper strictly passive communication law is then employed to compensate for the computed passivity shortage so that the closed-loop stability under delays as well as position and force synchronization are preserved under appropriate conditions. Simulations with nonlinear 2-DOF robotic manipulators in different settings illustrate our approach.
May 14, 2026

Residual Reinforcement Learning for Robot Teleoperation under Stochastic Delays

Stochastic communication delays in teleoperation introduce signal discontinuities that undermine control stability and degrade control performance. Consequently, the conventional reinforcement learning (RL) methods struggle with the delayed observations due to the delay-induced observations, leading to high-frequency chattering. To address this, we propose a hybrid control framework, delay-resilient RL, integrating a state estimator utilizing Long Short-Term Memory (LSTM) with a residual RL policy, which is resilient to stochastic delays. The LSTM reconstructs smooth, continuous state estimates from delayed observations, enabling the RL agent to learn a residual torque compensation policy that balances tracking accuracy with velocity smoothness. Experimental validation on Franka Panda robots demonstrates that our approach significantly outperforms the state-of-the-art baselines, ensuring robust and stable teleoperation even under high-variance stochastic delays.