3D Point Cloud Segmentation

As mobile robots become increasingly integrated into everyday environments, privacy risks arising from onboard cameras have become a growing concern. Ultra-low-resolution (ULR) RGB can mitigate visual privacy exposure at the source, but ULR appearance alone substantially limits semantic and spatial understanding. We therefore introduce a privacy-preserving asymmetric sensing setting that combines high-resolution (HR) depth with ULR RGB, preserving dense geometry while restricting fine-grained visual information. To address the severe information imbalance between HR depth and ULR RGB, we propose a joint 2D framework using HR geometry to guide semantic-oriented RGB reconstruction and RGB-D segmentation. Despite reliable frame-level predictions, consistent scene-level understanding remains challenging under the asymmetric HR depth--ULR RGB setting. We therefore develop an end-to-end 2D-to-3D pipeline that consolidates 2D semantic features for 3D segmentation. Experiments on ScanNet show that our method achieves the best 2D and 3D segmentation performance among privacy-preserving approaches and delivers the strongest zero-shot transfer to SUN RGB-D and SceneNN. Privacy recoverability analysis shows that our proposed HR depth--ULR RGB input reduces the recoverability of sensitive data, and real-robot experiments demonstrate the utility of the resulting 3D semantics for object-goal navigation.

This paper presents an end-to-end framework for reconstructing overhead power utility network topology and extracting span-level physical metadata from large-scale aerial LiDAR. The pipeline begins with semantic segmentation of the input point cloud using an improved KPConv-based model, in which data sampling and loss functions are adapted to emphasize pole and conductor (wire) classes. Network topology inference then proceeds in two stages: (i) pole instances are obtained by clustering pole-class points and validating candidates using geometric criteria, including height and verticality estimated via PCA, and (ii) candidate pole pairs are evaluated using a heuristic method and a lightweight ResNet-based classifier on 2D top-view projections of pole and wire point distributions to determine whether a physical conductor span exists. By explicitly classifying candidate spans, the approach mitigates common failure modes of heuristic connectivity rules in dense or cluttered scenes and under partial wire observation. For each validated wire, attributes regarding utility infrastructure geometry are computed, including endpoint conductor heights, ground elevation, sag-related lowest-point features, conductor arrangement, and wire width. Evaluation on multiple real-world aerial LiDAR datasets demonstrates decimeter-level endpoint height accuracy and approximately 9% relative improvement in recall for topology reconstruction compared to heuristic nearest-neighbor baselines, with larger gains in complex layouts.

Automated inspection of segmental tunnel linings requires adaptive segmentation from 3D point clouds, yet expert-tuned pipelines often degrade when tunnel conditions vary. This paper presents R4Tun, a large language model (LLM)-driven adaptation framework that extends an expert-designed pipeline (SAM4Tun) with bounded parameter tuning informed by structured context: memory ($m$), state ($s$), and knowledge ($k$). Evaluated on 30 selected Seg2Tunnel subsets (13 regular, 17 complex) across three LLMs, the full $m+s+k$ design raised mean Intersection-over-Union (mIoU) from 0.18 to 0.43--0.48 and overall accuracy (OA) from 0.42 to 0.59--0.65 relative to the static SAM4Tun baseline, with the near-reference regular (staggered) subsets reaching mIoU 0.784--0.796 across LLMs. Across 270 (30 tunnels $\times$ 3 different LLMs $\times$ 3 context settings) runs, the LLMs showed similar parameter-adjustment trends (with overlapping 95% CIs on mean gains) and consistently adjusted a shared set of critical parameters. These results support R4Tun as a controlled, label-free, cross-LLM adaptation mechanism in the tested SAM4Tun--Seg2Tunnel setting, demonstrating consistent accuracy gains; we position R4Tun as a mechanism contribution rather than a deployable final-inspection system, in which each bounded parameter change is auditable via logged rationales.

Modern crop breeding demands precise organ-level analysis for trait quantification, making plant point cloud segmentation (PPCS) increasingly important. However, conventional deep learning approaches rely heavily on densely annotated datasets that are labor-intensive to acquire. Unified PPCS adaptation from distribution-shifted examples with minimal additional training remains challenging. To address this, we propose PlantC2USeg, a deep transfer learning framework featuring cross-scale consistency learning to explicitly align features across spatial scales and an information-restricted decoding strategy that prevents reconstruction shortcuts and promotes robust adaptation. The resulting pre-training enables stable few-shot generalization across species and sensing conditions, while unified fine-tuning with inherited thresholds further reduces adaptation overhead. Under full supervision on Soybean3D, PlantC2USeg achieves the highest semantic IoU and instance mWCov among compared methods, at 91.91% and 94.62%. With 20 labeled samples, it leads both metrics at 89.78% and 90.27%; with only 10 samples, it retains the highest mWCov of 83.23% while achieving 83.19% IoU. Across HR3D, 10-shot transfer to tobacco, tomato, and sorghum averages 78.41% IoU and 79.42% mWCov, while 22-shot transfer to SYAU-Maize achieves the highest IoU and mRec at 92.75% and 93.51%. Furthermore, a leading category-averaged mIoU of 85.0% on ShapeNet Part demonstrates the framework's capability to handle diverse shape variations beyond agricultural domains. These results demonstrate that PlantC2USeg reduces overall adaptation effort under distribution shifts, enabling scalable plant phenotyping and transferable 3D representation learning beyond agriculture.

In real pigsty environments, pig point clouds often come into close contact with background structures, resulting in blurred target boundaries, local adhesion, and background mis-segmentation. This reduces the accuracy of subsequent point cloud completion and body size measurement. To address these challenges, this study proposes a pig point cloud segmentation method based on boundary feature analysis. The proposed method adopts Octree Transformer as the backbone network and integrates local geometric details with global semantic context through octree convolution, self-attention encoding, and multi-scale feature fusion. Furthermore, soft-distance boundary pseudo-labels are generated to provide continuous boundary supervision, and a bidirectional cross-boundary semantic module is designed to enable explicit interaction between boundary and semantic features. Experiments conducted on a comprehensive dataset demonstrate that the proposed method significantly outperforms various state-of-the-art models in terms of segmentation accuracy, mean intersection over union, and boundary delineation. The results indicate that the method effectively alleviates boundary adhesion, providing reliable point cloud inputs for downstream precision livestock farming tasks.

3D scene understanding is increasingly important in construction, yet most methods are developed on curated datasets that do not fully reflect real site sensing conditions. In many workflows, individual LiDAR scans provide rapid local updates rather than complete scene representations, producing limited surface coverage, acquisition-driven density variation, and severe imbalance between dominant planar surfaces and sparse construction elements. Because large point clouds must be downsampled, sampling resolution and point allocation directly affect the balance between geometric detail and spatial context. This study evaluates these effects under a fixed per-fragment point budget and introduces an incidence-aware sampling strategy for individual LiDAR scans. The method maps points to a geometry-normalized manifold space for voxel-based selection while preserving original Euclidean coordinates for downstream learning. It requires only point coordinates and normals and no backbone modification. Using the Site in Pieces (SIP) benchmark, experiments with Point Transformer and PointNeXt show improved resolution-averaged segmentation performance, especially for non-planar elements and ladders, while reducing sensitivity to sampling resolution. The results show that acquisition-aware sampling can provide a more stable geometric representation and should be treated as an active component of individual-scan 3D segmentation rather than generic preprocessing.

Modern image models provide strong cues about \emph{what} should be segmented in each view, but their masks do not by themselves determine \emph{where} those labels should persist in 3D. We present Cross-Domain Segmentation via Gaussian Splatting (CDSeg), a label-transfer interface that requires no task-specific 3D segmentation training and uses Gaussian primitives as a renderable label carrier. An external mask source supplies the labels, while renderer-derived visibility determines which 3D primitives receive them. The carrier is instantiated either by completing each input point into one Gaussian, preserving its index, or by reusing the native primitives of an optimized Gaussian scene. CDSeg records pixel--primitive associations during rendering and fuses multi-view masks through voting and a local filter. The resulting labels can be returned to the original points, retained on the native Gaussian scene, or rendered into other views. CDSeg covers promptable, automatic instance, semantic, and LiDAR settings and processes scenes with millions of primitives in seconds. It obtains 92.35% mIoU on DesktopObjects-360, 95.89% on NeRDS-360, and 65.77% on the full ScanNet-v2 validation split using the provided 2D semantic annotations. CDSeg thereby provides one interface for reusing 2D masks across point clouds, Gaussian scenes, and image views without a task-specific 3D segmentation network.

Fine-tuning pre-trained point-cloud backbones typically updates all parameters, resulting in substantial computation and memory overhead. More importantly, modern point backbones rely on aggressive tokenization and downsampling, which yields compact global tokens but irreversibly discards fine-grained local geometry, an inherent bottleneck for parameter-efficient adaptation. Consequently, existing PEFT methods that operate only on these coarsened tokens can modulate global semantics but struggle to recover the missing multi-scale locality. We present Point Ladder Tuning (PLT), a locality-aware PEFT framework that performs hierarchical, instance-conditioned adaptation while keeping the backbone frozen. PLT forms a lightweight closed loop: (i) a Hierarchical Ladder Network (HLN) constructs a multi-resolution local feature pyramid directly from raw points; (ii) a Local-Global Fusion (LGF) aligns and fuses local pyramids with intermediate backbone semantics; and (iii) a Dynamic Prompt Generator produces instance-aware multi-scale prompts to modulate the frozen backbone effectively. For dense prediction, we further introduce a lightweight segmentation head that progressively upsamples fused features and leverages backbone priors to refine fine structures. Extensive experiments on classification and dense prediction show that PLT consistently surpasses prior PEFT baselines with minimal tunable parameters. PLT achieves state-of-the-art performance using only 2.71% trainable parameters for classification and 7.69% for dense prediction, and scales favorably to larger backbones, requiring merely 0.36% parameters on PointGPT-L. The code is released at https://github.com/JunLinChang/ECCV2026-PLT.

Ground segmentation is a fundamental prerequisite for autonomous navigation, environmental perception, and object detection in ground mobile platforms. To address the under-segmentation of ground points caused by sparse long-range point clouds, ground undulations, and interference from non-ground structures in complex road scenarios, this paper proposes a two-stage ground segmentation method based on the Adaptive Concentric Zone Model. First, an Adaptive Concentric Zone Model is constructed to dynamically determine the number of sectors in each ring, thereby forming local zones with more balanced point distributions. Based on this model, a two-stage ground segmentation method is developed. In the coarse segmentation stage, a lowest-height seed constraint and height-decay weighting are introduced to establish a weighted principal component analysis plane fitting model, from which ground candidate points are extracted. In the fine segmentation stage, a reflectance intensity consistency constraint is employed to distinguish high-confidence ground points from uncertain points, and the uncertain points are further refined based on the local height stability of high-confidence neighborhoods. Experimental results show that the proposed method achieves Precision, Recall, and F1-score values of 99.12%, 96.24%, and 97.66% on the SemanticKITTI dataset, and 98.72%, 100.00%, and 99.36%, respectively, on a self-collected point cloud acquired using a RUBY-PLUS. The results demonstrate that the proposed method can effectively adapt to the range-dependent distribution characteristics of LiDAR point clouds, which are dense at near ranges and sparse at far ranges. It reduces the misclassification of non-ground points while maintaining ground point recall, thereby effectively improving the stability of ground segmentation.

3D unsupervised domain adaptive (UDA) segmentation mitigates the high cost of manual annotations of the new domain data. Self-training has emerged as the dominant approach in this area, where its success heavily depends on a well-initialized warm-up model to generate reliable pseudo labels. However, existing methods often depend on source supervision or output-level adversarial alignment to obtain the warm-up model, which suffer from limited generalization and training instability due to the large domain gap between domains. Constructing domain-similar representations is an effective way to bridge this gap. In this work, we propose CVKD-UDA, which revisits voxel size as a core design factor to construct domain-similar representations and leverages cross-view complementary cues to balance transferability and discriminability of the warm-up model. First, we generate two complementary views by varying voxel sizes and introduce a cross-view knowledge distillation (CVKD) to enhance generalization and target perception of the model. Second, to balance transferability and discriminability, we design a lightweight Decouple-Adapter and an auxiliary imitation classifier to decouple cross-view knowledge transfer. Extensive experiments on two benchmarks demonstrate that CVKD-UDA effectively improves the performance of self-training methods and provides a new perspective for 3D UDA segmentation. Our code will be available at GitHub.

Rail track extraction is essential for effective railway asset management and maintenance, especially in automated inspection and mapping workflows. This paper introduces a novel method for extracting rail tracks from classified 3D point clouds using a fully convolutional recurrent neural network that preserves full spatial resolution and is trained exclusively on synthetically generated data. This approach enhances per-pixel quality and is particularly suited for rail track extraction. The proposed method begins by rasterizing points corresponding to railroad tracks, then applies the neural network to reduce noise and yield a cleaner track representation suitable for vectorization [1]. Subsequent morphological operations further refine the resultant data, enabling accurate track centerline extraction. Next, the extracted centerlines undergo smoothing to eliminate residual irregularities [2, 3]. Finally, the algorithm transfers 3D information from lidar points onto 2D polylines and applies additional vertical smoothing. A single centerline for both tracks is found using the Dynamic Time Warping (DTW) algorithm [4]. The final outcome consists of rail top centerlines and track centerlines derived for rail pairs, with minimal manual intervention. Experimental validation confirms the effectiveness of this method in yielding high-quality rail track extraction.

Interactive 3D segmentation aims to extract object masks in point clouds with minimal user clicks. Despite recent progress, most existing approaches still struggle with (i) coarse voxel resolution that blurs fine boundaries under limited clicks and (ii) hard false positives caused by confusing background structures. These issues are exacerbated by density and scale shifts across datasets (e.g., dense RGB-D reconstructions vs. sparse LiDAR scans), where fixed refinement heuristics and purely click-driven decoding generalize poorly. To address them, we propose NegROI -- a novel transformer-based interactive framework that couples click-centric multi-resolution refinement with scene-conditioned negative prompts. Given a coarse voxel prediction, it refines only a local Region Of Interest (ROI) around the current click on a finer grid and fuses refined logits back to the coarse mask. To improve robustness and efficiency, we introduce uncertainty-driven selective refinement that prioritizes ambiguous regions. Meanwhile, we model hard background patterns via a set of scene-conditioned negative prompts obtained by cross-attention over scene tokens. We further stabilize these prompts with a diversity regularizer. Finally, we propose boundary-aware hard negative mining to supervise negative-prompt attention toward boundary-proximal, high-confidence false positives. Our experiments on common benchmark datasets (i.e., ScanNet, S3DIS, and KITTI) demonstrate improved click efficiency and reduced false positives, with stronger cross-dataset robustness than the state-of-the-art baselines.

Globally consistent semantic digital twins require centimeter-accurate and geographically transferable 3D facade segmentation. However, progress in facade parsing is limited by the lack of large-scale, standardized benchmarks for evaluating cross-domain generalization. Existing datasets are geographically narrow, semantically inconsistent, or insufficiently precise. We introduce UnderOneFacade, the largest cross-country and cross-continent 3D facade benchmark to date, comprising centimeter-accurate point clouds with hierarchical, harmonized, and architecturally grounded semantic labels totaling 2.7 billion annotated points. Through a systematic evaluation of representative point-, graph- and transformer-based architectures, we show that current methods struggle to recognize fine-grained architectural elements and degrade significantly across geographic domains, with the best models achieving only up to 33 IoU on the fine-grained LoFG3 benchmark. By combining geometric precision with standardized semantics at unprecedented scale, UnderOneFacade establishes a rigorous benchmark for developing robust and transferable 3D segmentation models. The dataset, evaluation scripts, and pretrained models will be released upon publication.

Automated instance segmentation of forest LiDAR point clouds is increasingly critical as forest monitoring moves toward scalable, detailed, 3D measurement. Yet, progress is constrained by label scarcity for tree instances; a single hectare can hold millions of points and hundreds of overlapping, complex crowns, making manual annotation from scratch with raw data laborious and error-prone. Annotations are often corrected from automatic pre-segmentations, but remain costly as these provide no interactive or AI-assisted refinement. Inspired by the promptable paradigm of foundation segmentation models, we propose SelectAnyTree, a promptable instance segmentation model that delineates any individual tree in a 3D forest point cloud from a few clicks. It introduces two key components: Click-to-query prompt encoder and Canopy Height Model (CHM)-guided first prompt. The former turns each click into a single content query, encoding its 3D position and positive/negative polarity together with a pooled local backbone feature. The latter provides treetops as a geometry- and ecologically guided first prompt without any user input. The resulting prompt query is then decoded into one tree mask by a state-space query decoder to efficiently capture long-range context in large-scale forest scenes with linear-time complexity. We evaluate SelectAnyTree in interactive and instance-level settings across seven diverse forest regions and an independent held-out test dataset, demonstrating strong generalization beyond the training domains. It segments a target tree to 78.2 Intersection over Union (IoU) from a single click, 24.8 points above the strongest promptable baseline, and reaches every accuracy target with the fewest clicks, while using far fewer parameters and less inference time than prior promptable models. The source code is available at https://github.com/thanhhff/SelectAnyTree.

Sociable weaver nests function as complex ecological structures offering thermoregulatory microhabitats and sustaining diverse species; however, datasets used in prior studies lack fine-grained 3D structural detail. Producing usable and accurate 3D weaver nest data is challenging due to their irregular geometry and integration with complex host vegetation. We bridge this gap with an open-access, 1.4 TB multimodal drone dataset of 104 nest-bearing trees, comprising 27,945 RGB images, 111,780 multispectral images, approximately 781 million 3D points, and expert-annotated semantic segmentation labels. We benchmark semantic segmentation using KPConv, RandLA-Net, and Point Transformer V3, with PT-v3 achieving an mIoU of 86.35% on the test set. While the results demonstrate strong performance for transformer-based and point-wise methods, they also highlight architecture-dependent challenges, particularly for convolution-based approaches such as KPConv. By uniquely combining spectral, spatial, and structural information, the presented dataset advances 3D reconstruction, segmentation, and classification algorithms, enabling ecological applications from nest volume estimation to species conservation, and serves as a demanding benchmark that exposes architecture-dependent performance under extreme class imbalance.

Despite significant advancements in point cloud analysis, reducing energy consumption and improving robustness remain understudied, largely due to the inherent limitations of Convolutional Neural Networks (CNNs). To address this issue, we draw inspiration from the primary visual cortex and propose a Dendritic-Connected Continuous-Coupled Neural Network (DC-CCNN), a novel Brain-Inspired Neural Network (BINN) architecture for point cloud analysis. By combining discrete and continuous encoding, our design replaces traditional Multilayer Perceptrons (MLPs) with more efficient and robust BINNs. Building upon this framework, we further propose an extended model, DC-CCNN++, to improve robustness under complex corruption conditions. Specifically, we introduce a Neuro-Inspired Robust Modulation-and-Readout Module (NRMR) to enhance feature stability and decision robustness through global-context gain modulation and dual-code evidence integration. We also design a Cortically Inspired Progressive Variability Training (CPVT) strategy, which progressively exposes the model to structured environmental variability while preserving stable clean-sample anchors during training. Experimental results show that DC-CCNN++ improves the performance of brain-inspired networks on point cloud analysis while maintaining performance comparable to state-of-the-art methods. Compared with the original DC-CCNN, it achieves stronger results on both classification and part segmentation, and exhibits enhanced robustness against sparsity, occlusion, Gaussian noise, salt-and-pepper noise, and spatial transformations. With its efficiency, robustness, and biologically grounded design, DC-CCNN++ provides a promising alternative to traditional deep learning methods for point cloud analysis. Code is available at https://anonymous.4open.science/r/DC-CCNNpp-44E3.

High-risk applications in robotics, such as robot-assisted surgery, present unique challenges. These systems must be both highly precise and interpretable in order to be deployed in environments with very low tolerance for error or unsafe exploration. We present the first robotic system to demonstrate autonomous clip positioning on a physical phantom in laparoscopic surgery, one of the most common interventions in general surgery. After segmentation of a colorless point cloud from a single camera, target positions for the clips are extracted using spline interpolation, and can then be adjusted by the human operator. The segmentation model is trained on only 60 hand-labeled real point clouds, reflecting data scarcity in the surgical domain. We overcome this with a combination of pre-training on 128,000 synthetic point clouds and two novel data augmentation techniques. The motion of the end-effector to each target is visualized for the operator, satisfying the unique motion constraints of minimally-invasive surgery while ensuring that the robot's actions are verifiable and interpretable. In real robot experiments, our system localizes targets with the required precision of 0.75mm at a 95% success rate and executes autonomous clip positioning with a 100% success rate. We provide insights that are applicable to many other surgical and non-surgical tasks that require identifying and navigating to a precise target. Source code and project page: https://github.com/balazsgyenes/kirurc

Point cloud semantic segmentation requires architectures that capture both fine-grained local geometry and broad global scene structure. Transformer-based networks have demonstrated strong performance by focusing on detailed local feature aggregation; however, global context is conveyed primarily through skip connections across encoder-decoder stages, which we argue is insufficient for full scene understanding. We hypothesize that augmenting skip connections with a learnable global feature extraction module allows the network to acquire scene-level knowledge before descending into local detail, leading to richer and more contextually grounded representations. To this end, we propose Point Transformer with Wavelet Neural Operato (PT-WNO), which integrates a shared Wavelet Neural Operator (WNO) branch alongside the skip connections of a point cloud transformer backbone. At each encoder-decoder transition, point features are projected onto a dense 3D volumetric grid where the WNO captures multi-scale global spectral context through learnable wavelet decomposition and reconstruction. These global features are fused back into the network via lightweight adapters, complementing rather than replacing the existing skip connections. Experiments on four large-scale 3D point cloud benchmarks demonstrate the effectiveness of PT-WNO. On S3DIS (Area 5), PT-WNO achieves 71.59% mIoU, outperforming the Point Transformer v3 (PTv3) baseline by +1.03 points. On DALES it achieves 81.05% mIoU (+1.47 over the baseline). On ScanNet~v2, PT-WNO obtains 76.19% mIoU, remaining competitive with the baseline (76.36%).

3D vision-language segmentation aims to segment target objects in 3D scenarios according to the linguistic instructions and visual observations. Prior art heavily relies on the coarse superpoint representation to reduce the computation complexity, which suffers from poor segmentation quality and messy object boundaries. In this paper, we propose the SEGment-And-select (SEGA3D) paradigm for 3D visionlanguage segmentation that directly operates on the fine-grained visual information and is free from the superpoint dependency. Specifically, we first leverage a mask candidate generator to provide fine-grained categorical mask candidates, substantially improving the quality of candidate masks over the superpoint counterparts. Then, a Large Language Model (LLM) is utilized to generate the semantic and spatial information based on the linguistic description and visual features. The LLM output and visual features are fed to the Semantic-Spatial Selector (SSS) to produce the top-ranking mask candidates. Eventually, the Loopback Verification Module (LVM) is designed to yield the segmentation mask from the selected candidate masks. Our SEGA3D attains competitive performance on ScanRefer, ScanNet and Matterport3D benchmarks. Notably, our SEGA3D surpasses the top-performing counterpart by 8.3 mIoU and 5.3 mIoU on ScanNet and Matterport3D, respectively. Codes will be available upon publication.

The paradigm of digital twin cities is shifting from coarse visual mapping toward more precise and actionable digitization of urban assets. However, existing datasets predominantly focus on coarse visual perception, lacking the strict multi-modal alignment and attribute and status diagnosis required for automated infrastructure maintenance. To bridge this gap, we introduce WHU-Infra3D, a large-scale, multi-modal benchmark dataset dedicated to roadside infrastructure inventory. Covering 53.8 km across three cities, WHU-Infra3D uniquely integrates panoramic imagery and LiDAR point clouds with rigorous 2D-3D instance association and cross-frame tracking. Comprising over 175k multi-view 2D bounding boxes alongside thousands of 3D infrastructure instances, the dataset provides over 181k detailed attribute and status annotations (e.g., rust, occlusion) to empower operational health assessment. We establish comprehensive baselines across five core tasks: 2D detection, 2D cross-view matching, 3D geo-identification, 3D point cloud segmentation, and attribute recognition. Extensive evaluations expose significant cross-city domain gaps and inherent vulnerabilities of current models on long-tailed defective statuses, establishing WHU-Infra3D as an essential testbed for advancing scalable, AI-driven urban infrastructure inventory and lifecycle management. The WHU-Infra3D dataset is available at https://github.com/WHU-USI3DV/WHU-Infra3D.

AI-based semantic and instance segmentation of terrestrial and drone LiDAR point clouds is emerging as a transformative approach for converting the complex 3D structure of forests into actionable information for forest monitoring and biodiversity assessment. However, forest LiDAR scenes remain highly challenging due to their large data volumes, irregular sampling density, overlapping and complex canopy structure, and geographic variability. Existing methods based on sparse convolutions or Transformers achieve promising results, but suffer from two key limitations: Quadratic complexity of attention scales poorly to large forest scenes, and Generic context modeling does not exploit forest structural priors, limiting tree separation in complex regions. To address these challenges, we propose ForestMamba, a structure-aware method that incorporates forest-specific priors into feature encoding, query generation, and query refinement, while replacing quadratic attention with linear-time state-space modeling. First, we introduce a sparse encoder with vertical-priority slab serialization that organizes sparse voxels into vertically coherent sequences for efficient long-range context modeling. Second, we propose a geometry-guided query initialization strategy based on an on-the-fly multi-scale Canopy Height Model (CHM), where canopy maxima provide ecologically meaningful query seeds, supplemented by Farthest Point Sampling (FPS) to cover understory trees. Third, we design a Mamba-based query decoder that combines local kNN voxel aggregation with a spatial dual-path Mamba for query refinement with linear computational complexity. Extensive experiments across seven forest regions demonstrate that ForestMamba consistently outperforms existing baselines in both segmentation tasks, while achieving 3 times faster inference and 2.3 times lower GPU memory than Transformer-based methods.

Plain Transformers have become the de-facto architecture for processing text, audio, image, and video, offering a unified backbone for multimodal learning. However, state-of-the-art architectures for point cloud semantic segmentation remain dominated by U-Nets architectures where convolutions are interleaved with local or windowed attentions. In this work, we show how to effectively leverage vanilla, non-hierarchical ViTs for segmentation of large-scale automotive lidar scenes. We bridge the performance gap thanks to a carefully designed tokenizer, a lightweight decoder segmentation head, and tailored data augmentations. Our approach, VaViT for Vanilla ViT, matches or exceeds the performance of state-of-the-art methods while maintaining the simplicity of ViT architecture. We provide extensive evaluations on nuScenes, SemanticKITTI, and Waymo Open Dataset to validate the efficiency of our method. Code and models are available at https://github.com/valeoai/VaViT.

Point cloud segmentation is a fundamental task in 3D scene understanding. Its progress is constrained by the high cost and time required for dense 3D annotations, making labeled samples difficult to obtain. Beyond annotation scarcity, different sensing modalities face inherent limitations. 2D images provide rich texture and appearance cues, yet they lack explicit depth and geometric structure. In contrast, 3D point clouds capture accurate spatial geometry but are sparse and contain no texture information. As a result, relying on a single modality restricts the richness of learned representations and weakens generalization. Although recent multi-modal methods that combine 3D point clouds with 2D images have demonstrated strong performance in tasks such as classification and retrieval, they typically depend on large-scale labeled datasets and have not been fully exploited for data-efficient dense prediction. To address these limitations, we propose a novel cross-modal knowledge distillation framework, xModel-KD, for 3D point cloud segmentation. Our method exploits the complementary strengths of 2D texture and 3D geometry by learning unified per-point representations through cross-modal alignment. Specifically, we design a cross-modal fusion encoder trained with a contrastive objective that enforces feature consistency between corresponding 2D and 3D representations across multiple views. By integrating powerful pre-trained backbones with a targeted fusion strategy, the proposed framework effectively transfers appearance cues from images to geometry-aware point features. Experimental results show that cross-modal fusion achieves a 2% absolute improvement in mIoU over a LiDAR-only baseline, demonstrating the benefit of leveraging complementary multi-modal information for scalable and annotation-efficient 3D scene understanding.

We address the challenging task of 3D object segmentation in complex scene point clouds without relying on any scene-level human annotations during training. Existing methods are typically constrained to identifying simple objects, primarily due to insufficient object priors in the learning process. In this paper, we present FoundObj, a novel framework featuring a superpoint-based object discovery agent that incrementally merges suitable neighboring superpoints, guided by our innovative semantic and geometric reward modules. These modules synergistically leverage semantic and geometric priors from self-supervised 2D/3D foundation models, providing complementary feedback to the object discovery agent and enabling robust identification of multi-class objects through reinforcement learning. Extensive experiments on diverse benchmarks demonstrate that our approach consistently outperforms existing baselines. Notably, our method exhibits strong generalization in zero-shot and long-tail scenarios, underscoring its potential for scalable, label-free 3D object segmentation.

Greenhouse agriculture in the Mediterranean region faces significant automation challenges due to its unique structural and environmental constraints. These environments are characterized by extremely narrow aisles, heterogeneous terrains ranging from concrete to tilled soil and severe optical interference caused by polyethylene covers, which induce specular reflections and "ghost points" in depth sensors. While autonomous navigation is essential for digitizing agricultural tasks, traditional solutions often rely on expensive 3D LiDAR systems that are economically unscalable for most facilities. To address this, this paper presents GreenSeg, a robust perception framework for autonomous navigation using RGB-D sensing. The proposed method introduces a dual-layer validation strategy: a robust global plane fitting combined with a surface curvature filter for terrain adaptability, and a seed-point-based Region Growing constraint to ensure the spatial continuity of the navigable plane. Experimental validation was conducted using the AGRICOBIOT I platform across four diurnal scenarios with varying solar elevations. The results show that GreenSeg consistently outperforms benchmark segmentation methods, achieving peak improvements of 11.58% in mean Recall and 19.24% in mIoU during critical rotational maneuvers at the end of corridors. These findings confirm that the proposed algorithm enables stable and safe autonomous navigation in unstructured, dynamic agricultural environments that are subject to budget constraints and sensitive to lighting conditions.

Existing approaches for unsupervised 3D point cloud segmentation predominantly rely on a purely visual similarity-based learning-by-clustering paradigm, which suffers from a fundamental limitation: long-tail ambiguity. In such a paradigm, features of minor classes are consistently absorbed by dominant clusters, leading to severely imbalanced predictions. To address this issue, we propose LangTail, a language-guided hierarchical learning framework that leverages the balanced world knowledge encoded in language models to mitigate long-tail ambiguity in unsupervised 3D segmentation. The key idea is to establish multi-level associations between language-derived semantic priors and visually underrepresented minor classes, thereby compensating for the biased attention of purely visual clustering toward dominant classes. Specifically, LangTail first constructs an entity-level semantic prior from language models, capturing balanced and fine-grained world knowledge across categories. These priors are injected into a hierarchical clustering framework via contrastive alignment. This guides multi-granularity semantic structure formation and prevents minor classes from being absorbed by dominant clusters, yielding more discriminative representations for underrepresented categories. Extensive experiments on ScanNet-v2, S3DIS, and nuScenes demonstrate that LangTail consistently outperforms existing methods by significant margins, \ie, +13.5, +12.9, and +8.9 mIoU, respectively. These results demonstrate the effectiveness of language priors in improving the representation of minority classes in 3D point clouds. The code will be released at: https://github.com/Whisky0129/langtail_official.

Point cloud stands as the most widely adopted format for representing 3D shapes and scenes due to its simplicity and geometric fidelity. However, its inherent unordered and irregular nature, exacerbated by sensor noise and occlusions, introduces unique challenges for machine learning based methodologies. To combat these issues, diverse strategies have been developed, including converting to a format that has orderliness, extracting local geometry, and permutation-invariant or self-attention-based processing. In this paper, our focus is directed towards deep learning models for three fundamental tasks in 3D vision: point cloud classification, part segmentation, and semantic segmentation. We begin by formally defining point cloud data, followed by an in-depth discussion on its structural characteristics. Then, we categorize notable works based on their backbone structure and evaluate their performance on popular benchmarks. Beyond empirical comparison, we offer insights into architectural innovations and limitations. We also outline open challenges and promising future directions for 3D point cloud understanding.

We introduce an empowered transposed Fully Connected Weighted (t-FCW) graph representation to embed point clouds into a metric space. While original t-FCW has shown promising results for point cloud classification, the reasons behind its effectiveness and its broader applicability remained unclear. In this work, we analyze the properties that make the empowered and original t-FCW effective and design a network that uses the empowered t-FCW exclusively as feature extractors. From an interpretability perspective, we build memory banks for classification, part segmentation, and semantic segmentation using the empowered t-FCW. Our analysis reveals that the empowered t-FCW inherits robustness from surface descriptors, provides interpretability through dimension-wise relations. These properties enable a highly efficient and interpretable network, which processes the ModelNet40 classification problem in approximately 7 seconds on an NVIDIA RTX A5000 GPU. Importantly, empowered t-FCW can function both as a lightweight standalone baseline and as a complementary plug-in to existing deep models.

Single-unit crown restoration is among the most common procedures in clinical dentistry, with CAD/CAM workflows now designing crowns directly from intraoral scans. Partial scans are often preferred over full-arch scans for single-unit cases due to fewer stitching errors, yet most segmentation networks trained on full arches fail on partial scans, while end-to-end generative crown methods often produce over-smoothed surfaces that lose occlusal detail. We propose an end-to-end pipeline that takes a raw intraoral scan and target FDI tooth number as input and outputs an initial, patient-specific crown proposal for clinician refinement. The pipeline has three phases: (I) data preparation and pose standardization; (II) segmentation routed by scan type; and (III) crown proposal generation via context-aware retrieval and Blender-based fitting. We address partial-scan segmentation through a classify-then-align strategy: a DGCNN classifier categorizes the scan into one of five anatomical types, then coarse-to-fine RANSAC+ICP registration standardizes the jaw coordinate frame, followed by graph-cut optimization to refine tooth-gingival boundaries. Trained on 1,958 partial scans, the pipeline achieves macro-average DSC 0.9249, Recall 0.8919, and Precision 0.9615 across 17 semantic classes; a fine-tuned full-arch model reaches DSC 0.9347. The prepared tooth and its mesial and distal neighbors achieve DSC 0.9468-0.9569 with sub-millimeter Centroid Errors (0.2666-0.2774 mm). These centroids anchor a retrieval module using DGCNN embeddings and cosine similarity over neighboring and opposing teeth, followed by spline-guided alignment and Blender Python API refinement. The pipeline produces a preliminary crown shell in 2.5-3.5 minutes, offering a practical alternative to end-to-end generative approaches.

Unsupervised point cloud segmentation is critical for embodied artificial intelligence and autonomous driving, as it mitigates the prohibitive cost of dense point-level annotations required by fully supervised methods. While integrating 2D pre-trained models such as the Segment Anything Model (SAM) to supplement semantic information is a natural choice, this approach faces a fundamental mismatch between discrete 3D points and continuous 2D images. This mismatch leads to inevitable projection overlap and complex modality alignment, resulting in compromised semantic consistency across 2D-3D transfer. To address these limitations, this paper proposes PointGS, a simple yet effective pipeline for unsupervised 3D point cloud segmentation. PointGS leverages 3D Gaussian Splatting as a unified intermediate representation to bridge the discrete-continuous domain gap. Input sparse point clouds are first reconstructed into dense 3D Gaussian spaces via multi-view observations, filling spatial gaps and encoding occlusion relationships to eliminate projection-induced semantic conflation. Multi-view dense images are rendered from the Gaussian space, with 2D semantic masks extracted via SAM, and semantics are distilled to 3D Gaussian primitives through contrastive learning to ensure consistent semantic assignments across different views. The Gaussian space is aligned with the original point cloud via two-step registration, and point semantics are assigned through nearest-neighbor search on labeled Gaussians. Experiments demonstrate that PointGS outperforms state-of-the-art unsupervised methods, achieving +0.9% mIoU on ScanNet-V2 and +2.8% mIoU on S3DIS.