Convolutional Autoencoder

Space weather early warning depends on detecting solar wind transients in in-situ measurements at the first Sun-Earth Lagrange point (L1), before they reach Earth. Fixed thresholds can miss combined magnetic and plasma structure, and many learning methods provide a single anomaly score. We present the Physics-Informed Solar-wind Convolutional autoEncoder for Space-weather (PISCES), a convolutional autoencoder trained without catalog labels on OMNI solar wind measurements under physics constraints. Its loss includes magnetic field consistency, an empirical relation between temperature and velocity, the Parker spiral angle, and penalties on changes between consecutive one-minute samples in derived quantities calculated from the reconstruction. At inference, PISCES separates the anomaly score into magnetic and plasma reconstruction errors, physics relations, and residual corrections, and reports the magnitude of each contribution. Attenuation of the skip connections, selected on validation data, improves average precision for the trained models, while the untrained scores remain nearly the same. The trained models also give a more consistent ordering of these physical contributions. After smoothing with a trailing median, the alarms can precede independently observed sudden commencements, including positive sudden impulses.

Estimating the distribution of relaxation times (DRT) fromelectrochemical impedance spectroscopy (EIS) is an ill-posed inverse problem that is highly sensitive to regularisation choices. We propose a physics-informed convolutional autoencoder that estimates DRT directly from EIS data without spectrum-specific tuning. A discretised relation between impedance and the DRT is embedded in the training process, constraining the network to produce impedance-consistent distributions. The model resolves overlapping relaxation processes in synthetic two-ZARC spectra and accurately reconstructs measurements from three independent solid oxide fuel and electrolysis cell datasets, with range-normalised errors below 1.1%. Decoder-probe analysis shows that the learned latent representation is organised according to relaxation timescale. Distances in this latent space capture operating changes, hydrogen-shortage events, and long-term degradation. The same lightweight architecture is applied across all datasets without modification, providing consistent DRT estimation and an interpretable basis for condition monitoring.

Model-based active flow control requires predictive models that are accurate, stable, and fast enough for real-time optimisation. In controlled wake flows, this is often achieved through Reduced-Order Models (ROMs) that first compress high-dimensional velocity snapshots into a latent space and then learn a time- stepping predictor for the dynamics in the latent space. Here, we study how the choice of the spatial encoder affects the predictability of the resulting latent coordinates for wake flows under control inputs. Using two actuated 2D wake configurations, a simplified truck wake and the fluidic pinball, we compare Proper Orthogonal Decomposition (POD) against nonlinear Convolutional Autoencoders (CAEs) and two types of variational autoencoders for compression, and evaluate several temporal predictors based on Long Short-Term Memory networks. CAEs achieve higher compression efficiency and sharper short-term reconstructions, but they produce latent dynamics that are more irregular and with broadband spectral content. As a consequence, long-horizon forecasts degrade faster and show a higher probability of catastrophic divergence than POD-based models. POD yields smoother latent trajectories that are easier to learn and extrapolate, leading to more reliable predictions beyond the short- term regime. These results reveal a clear trade-off between compactness and forecast accuracy, and suggest that the stability of the latent dynamics prediction can outweigh maximal compression. This is particularly relevant for control strategies rooted in forecasts of the dynamics, such as model predictive control and reinforcement learning. The findings provide practical guidance for designing actuation-aware, hardware-feasible predictive ROMs for real-time flow control.

Guided wave-based structural health monitoring (GWSHM) with onboard transducers offers significant potential for the early diagnosis of damage in engineering structures. However, the practical deployment of deep learning models is often hindered by the limited availability of labelled experimental data and the high computational cost of generating large-scale high-fidelity simulation datasets. This study presents a multifidelity transfer learning framework that integrates lightweight physics-based simulations, convolutional autoencoder (CAE)-based deep feature learning, a feed-forward neural network, and limited experimental measurements for accurate damage localisation and sizing in plate-like structures instrumented with piezoelectric transducers. A computationally efficient one-dimensional time-domain spectral element model is employed to generate a large synthetic dataset for pretraining, while transfer learning adapts the model to experimental domains using only a small amount of labelled data. The CAE-based transfer learning framework significantly outperforms its CNN-based counterpart in damage localisation accuracy. The model achieves excellent predictive performance with $R^2$ scores exceeding 0.93 for damage localisation and 0.99 for damage sizing. Its generalisation capability is demonstrated on previously unseen data, showing high prediction accuracy for damage scenarios not represented during pretraining or fine-tuning. The results establish the proposed framework as an accurate, computationally efficient, and practically viable solution for real-world GWSHM applications.

An important challenge in texture recognition is the limited amount of data for training frequently found in real-world applications. In computer vision in general, a successful strategy to mitigate this issue is the use of a pretraining stage where the neural network learns to identify relations between parts of the data in a self-supervised manner. A well-established framework in this direction is masked autoencoder. Nevertheless, these models usually rely on computationally intensive architectures, such as vision transformers. In the particular case of texture images, most of the relevant information is compacted within a delimited area around each pixel, which suggests that capturing long-range dependence via the attention mechanism may be unnecessary. Based on that assumption, here we propose a framework where the pretraining model is a convolutional autoencoder. To leverage the rich information conveyed by texture patterns, we employ deep filters coupled with Fisher vector pooling. In this way, we improve the performance of texture recognition without adding significant computational burden. Our approach is compared with several state-of-the-art methods in different texture databases, confirming its potential both in terms of classification accuracy and computational complexity.

A lightweight and reproducible denoising pipeline for high-throughput Raman spectroscopy is presented. The approach relies on a one-dimensional convolutional autoencoder trained using a Noise2Noise strategy, requiring neither external spectral libraries nor high signal-to-noise reference spectra for training. From a reduced training subset composed of repeated short-exposure acquisitions, the model learns to reconstruct Raman spectra while efficiently suppressing stochastic noise. The method is evaluated on a heterogeneous mineral sample, using both quantitative spectral fidelity metrics (RMSE, SNR, SSIM) and task-oriented criteria based on unsupervised K-means classification. Results demonstrate that integration times as short as 5 ms per spectrum, which are typically insufficient for reliable interpretation, yield denoised spectra with high fidelity to the reference data while preserving chemically coherent maps. This work provides a practical trade-off between spectral quality and acquisition speed, enabling fast, adaptable Raman workflows compatible with routine laboratory use. It also offers a transferable framework for other one-dimensional spectroscopic modalities.

Safe autonomous Uncrewed Aerial Vehicle (UAV) navigation in urban environments requires real-time path planning that avoids obstacles. MaxConvNet is a potential-field planner that leverages properties of Maxwell's equations to generate a path to the goal without local minima. We extend the 2D MaxConvNet magnetic field planner to 3D, using a convolutional autoencoder to predict obstacle-aware potential fields from LiDAR-derived 101^3 voxel grids. Evaluation across 100 randomized closed-loop trials in two distinct Cosys-AirSim urban environments, a dense night-time cityscape and a suburban district shows a 100% path planning success rate on both maps without retraining. In offline path planning, 3DMaxConvNet produces path lengths comparable to A* on unseen maps while reducing runtime from 0.155--0.17s to 0.087--0.089s, or about 1.7--1.95 times faster than A*. Against RRT*(3k), 3DMaxConvNet achieves similar path quality while reducing planning runtime from 17.2--17.5s to about 0.09s, which is roughly 193--201 times faster than RRT*(3k).

Measurement-critical ultrasound tasks often depend on a small anatomical region, making global reconstruction metrics an unreliable proxy for clinical fidelity. We propose an ROI-aware representation learning framework and instantiate it for first-trimester nuchal translucency (NT) screening under multi-hospital domain shift. A two-phase convolutional autoencoder (CAE) first learns a globally faithful 128-D latent code via MS-SSIM, then refines the NT ROI using intensity (L1) and normalized Sobel-edge constraints. To combine these heterogeneous objectives without manual tuning, we initialize loss weights via gradient-based calibration from per-term gradient magnitudes. Under strict hospital-wise evaluation with one hospital held out, ROI refinement improves both global and measurement-relevant quality: on the standard dev split it increases PSNR by +0.27 dB (val) and +0.29 dB (held-out test), reduces ROI MAE by 8.87% (val) and 6.43% (held-out test), and reduces ROI Edge-MAE by 11.10% on source hospitals and 4.90% on the unseen hospital. Beyond reconstruction, frozen-latent probes provide additional evidence of generalization: hospital provenance becomes less confidently predictable on the unseen site (0.556 to 0.541 max-softmax; 0.684 to 0.688 entropy) while OOD detection remains strong across site-held-out protocols (Mahalanobis AUROC up to 0.9956, with modest KNN gains in challenging splits). The same ROI-aware refinement principle is anatomy-agnostic and can be adopted for other fetal biometry targets (e.g., crown-rump length (CRL), nasal bone (NB)) and broader medical imaging settings where small ROIs dominate clinical decisions.

Predicting the relative value of any given chess piece in a position remains an open challenge, as a piece's contribution depends on its spatial relationships with every other piece on the board. We demonstrate that incorporating the state of the full chess board via latent position representations derived using a CNN-based autoencoder significantly improves accuracy for MLP-based piece value prediction architectures. Using a dataset of over 12 million piece-value pairs gathered from Grandmaster-level games, with ground-truth labels generated by Stockfish 17, our enhanced piece value predictor significantly outperforms context-independent MLP-based systems, reducing validation mean absolute error by 16% and predicting relative piece value within approximately 0.65 pawns. More generally, our findings suggest that encoding the full problem state as context provides useful inductive bias for predicting the contribution of any individual component.

A novel convolutional autoencoder and neural ODE (CAE-NODE) framework is proposed for a reduced-order model (ROM) applied to transient 2D counterflow flames, as an extension of AE-NODE methods in homogeneous reactive systems to spatially resolved flows. The multidimensional thermochemical fields (256 x 256 grid, 21 variables) obtained from direct numerical simulations (DNS) are used in training the CAE, where convolutional layers learned the underlying spatial correlations, allowing the CAE to construct an unsupervised 3D latent manifold that is physically meaningful, smooth, and continuous in time. This results in a compression ratio of over 400,000 times. The NODE then subsequently learns the continuous-time dynamics on the latent manifold, enabling the prediction of the full temporal evolution of the flames by integrating forward in time from an initial condition. The results demonstrate that the CAE-NODE can accurately capture the entire transient process, including ignition, flame propagation, and the gradual transition to a non-premixed condition, with excellent agreement with the DNS, while adhering to conservation principles at virtually no computational cost compared to the reference DNS. Predictions remain accurate at strain rates outside the training range. Moreover, despite being unsupervised, the learned latent manifold is highly correlated with the flame-state descriptors such as the progress variable, mixture fraction, and the scalar dissipation rate. This study, for the first time, highlights the potential of CAE-NODE for surrogate modeling of unsteady dynamics of multi-dimensional reacting flows.

The use of machine learning for modeling, understanding, and controlling large-scale physics systems is quickly gaining in popularity, with examples ranging from electromagnetism over nuclear fusion reactors and magneto-hydrodynamics to fluid mechanics and climate modeling. These systems - governed by partial differential equations - present unique challenges regarding the large number of degrees of freedom and the complex dynamics over many scales both in space and time, and additional measures to improve accuracy and sample efficiency are highly desirable. We present an end-to-end equivariant surrogate model consisting of an equivariant convolutional autoencoder and an equivariant convolutional LSTM using $G$-steerable kernels. As a case study, we consider the three-dimensional Rayleigh-B'enard convection, which describes the buoyancy-driven fluid flow between a heated bottom and a cooled top plate. While the system is E(2)-equivariant in the horizontal plane, the boundary conditions break the translational equivariance in the vertical direction. Our architecture leverages vertically stacked layers of $D_4$-steerable kernels, with additional partial kernel sharing in the vertical direction for further efficiency improvement. We demonstrate significant gains in sample and parameter efficiency, as well as a better scaling to more complex dynamics. The accompanying code is available under https://github.com/FynnFromme/equivariant-rb-forecasting.