Nuclear Data

Low-energy nuclear structure is encoded in a broad body of experimental information across the chart of nuclides. Learning how this information is organized across observables and nuclei can provide a data-driven empirical baseline for theoretical extrapolations and experimental design. Here, we develop held-out ensembles based on NuCLR (Nuclear Co-Learned Representations), a multi-task model of nuclear data, to study charge radii and electric-quadrupole transition strengths. Out-of-fold (OOF) validation shows that shared representation improves performance over single-task learning, yielding a charge-radius $\mathrm{RMS}$ deviation of $0.0147~{\rm fm}$ and a $\mathrm{B(E2)}$ $\mathrm{RMS}$ deviation of $0.192~e^2{\rm b}^2$ across hundreds of nuclides, competitive with state-of-the-art nuclear models. Our error bars estimate the expected prediction accuracy across the nuclear chart, highlighting regions where new data would encode information beyond the learned patterns. NuCLR thus serves as a data-driven surveyor of nuclear structure and a step toward a shared, multi-observable foundation model of the nuclear chart.

We apply transfer learning (TL) to construct data-driven models of inclusive electron-nucleus cross sections. Starting from an ensemble of deep neural networks pretrained on $^{12}$C data, we fine-tune the models separately for $^{3}$He, $^{6}$Li, $^{16}$O, $^{27}$Al, $^{40}$Ca, and $^{56}$Fe. The resulting models improve for all targets, marginally so for oxygen, where the carbon baseline is already adequate, although their predictive robustness depends on the amount, coverage, and precision of the available target data. We systematically study how model performance depends on the number of fine-tuned layers, on the fraction and selection of the training data, and on the overlap between the source and target kinematic domains. The layer-wise analysis shows that oxygen requires only shallow adaptation, whereas helium, calcium, and iron require substantially deeper fine-tuning. Lithium represents the least robust case because of its limited dataset, while aluminum demonstrates a strong sensitivity to a small subset of highly constraining measurements. For selected kinematic configurations outside the coverage of the carbon training data, the adapted models remain consistent with the measurements within their estimated uncertainties. Finally, we compare the resulting predictions with those of the phenomenological F1F2 model.

Foundation models are increasingly being pursued in particle and nuclear physics, but existing approaches remain strongly tied to individual experiments through detector-specific architectures or pre-training objectives, limiting their reuse across sensing modalities. We show that a point cloud self-distillation framework yields a substantially more general sensor-level pre-training recipe. We show that the same refined architecture and objective can be independently pre-trained with minimal changes on three qualitatively different detector modalities: liquid argon time projection chamber (LArTPC), collider TPC, and water Cherenkov. Using 1,000 labeled images for downstream task adaptation, Panda V2 matches or exceeds specialized foundation-model baselines trained with orders of magnitude more supervision, matching state-of-the-art particle-clustering performance with 70x fewer labeled events on sPHENIX while substantially improving particle identification, and on LArTPC data matching Panda (arXiv:2512.01324) particle reconstruction with up to 1,000x fewer labels. Beyond reconstruction, simple linear probes reveal physically meaningful latent structure associated with particle causality and track curvature.

This work investigates the feasibility of augmenting traditional R-Matrix codes with a robust machine learning framework for automatically detecting neutron resonances in transmission spectra. Neutron transmission data are often complex and noisy, making them difficult to analyze using traditional peak-identification methods. The state-of-the-art R-Matrix codes currently used by physicists to fit these data often depend on prior evaluations and require substantial manual effort. This preliminary study demonstrates a method for accelerating the post-experimental processing of neutron transmission data and reducing bias associated with dependence on prior evaluations. We employ a fully convolutional neural network to classify individual points as belonging to resonance or non-resonance regions in seven transmission spectra---two evaluated and five experimental. Although the model achieves classification accuracies in the range of 93%, further analysis shows that this metric overstates its ability to generalize. Building on our prior analysis in PHYSOR 2026, we find that, despite the inclusion of additional training data, the method does not generalize reliably to previously unseen isotopes. To address these limitations, future work should evaluate whether a larger and more diverse training dataset can produce a generalizable model and should incorporate known physical characteristics of neutron resonances to improve model performance.

Nuclear quantum effects are rigorously captured by imaginary-time path integrals, which map the quantum Boltzmann distribution onto a ring polymer of classical replicas. Yet the nuclear masses, the coupling to the environment, and the boundary conditions of the path remain hard-wired in the simulation or the trained model, even though this quantum context enters the path measure only through a quadratic action known in closed form. Here we show that a denoiser trained on classical Boltzmann statistics alone, composed at sampling time with an analytic Gaussian component carrying the entire quantum context, yields the quantum Boltzmann distribution of the nuclei. Such a composition exists and is exact whenever the training noise does not exceed the intrinsic quantum uncertainty of the target ensemble, and it is invariant across all quantum contexts admitted by this bound. We show exact transfer across temperature, isotopic mass, dissipation strength, and the boundary conditions of the path in theory and in numerical experiments, without retraining. The last yields the end-to-end displacement and momentum distributions of a tagged nucleus from open imaginary-time paths. The same invariance extends in principle to the permuted boundary conditions of bosonic exchange, with the identical denoiser. In this view, the noise of generative modeling and the quantum fluctuations of the nuclei are two faces of the same quadratic structure.

Ab initio modeling has established Wigner's SU(4) and Elliott's SU(3) as dominant symmetries of the nuclear force in light and intermediate-mass nuclei. We ask whether they also govern nuclear binding across the entire chart. Our aim is not high-precision prediction but physical insight, through interpretable, symmetry-based models. From the SU(3) and SU(4) Casimir operators we construct three neural-network (NN) mass models: Feature-Informed NN (FINN) for point predictions, Gaussian-Informed NN (GINN) adding uncertainty quantification, and Wigner-Informed NN (WINN) -- a mass formula using the Casimirs as an operator basis. All are trained on AME2016 and validated on nuclei new to AME2020. The SU(4) operators alone cut the root-mean-square error (RMSE) by nearly half on train and test data, and by about a fifth on extrapolation, relative to the liquid-drop baseline -- showing that Wigner's symmetry carries predictive information beyond bulk properties. Despite its compact form, WINN reaches the lowest validation RMSE, 0.430 MeV -- competitive with state-of-the-art mass models -- which we read less as a benchmark than as evidence that its symmetry basis captures important physics. WINN further reveals i) an enhancement of the quadratic SU(4) Casimir near the neutron dripline, signaling restoration of Wigner's symmetry, and ii) an unexpected gain of the quartic operator in the superheavy region. We thereby elevate emergent symmetries from the hidden order within individual nuclei to a governing principle of the whole nuclear chart.

Precise knowledge of nuclear structure is essential across fundamental physics, yet probing these structures is notoriously difficult. To address this challenge, ultra-peripheral collisions (UPCs) provide a femtoscopic tomography for imaging the atomic nucleus. UPCs offer a pristine electromagnetic pathway: coherent vector-meson photoproduction generates patterns of diffraction and two-source interference that directly encode the nuclear spatial density. Turning these patterns into quantitative constraints is, however, a challenging inverse problem, complicated by correlated sensitivities to deformation and neutron skin, phase smearing, and experimental backgrounds. Here we introduce an interpretable Multitask deep-learning framework that maps transverse momentum distributions to multiple nuclear-structure indicators simultaneously and identifies the kinematic regions driving each inference. We demonstrate the approach with coherent $J/ψ$ photoproduction in $^{96}_{40}\text{Zr} + ^{96}_{40}\text{Zr}$ collisions, showing that the learned features separate diffraction-dominated and interference-dominated information and provide analysis-ready observables for future high-luminosity data.

Averaging a neural network over its random parameters and marginalizing a Gaussian sector are the same operation, the Schur complement of the eliminated block, and when that block is closed it returns a covariance and its inverse. That is all a network ensemble produces, the closed case. The open case is missing, and nuclear reaction theory has it worked out. Projecting a scattering problem onto a chosen set of channels, with the rest carrying probability irreversibly to a continuum, leaves a non-Hermitian effective generator that conserves and itemizes exactly what it loses: the nuclear optical model and its generalized optical theorem. I set the two cases side by side using only the moments of a distribution, the algebra of Gaussians, and block inversion, no field theory, and give the closed-case dictionary in full: the neural tangent kernel is the Fisher sensitivity kernel, the infinite-width Gaussian limit is the Gaussian-process emulator, and the lazy-to-feature transition is the validity boundary of a reduced-basis emulator. I then test the open export on a truncated attention map, a token-level transfer operator, and a sparse expert router, and report a mostly negative result. The conserved flux ledger ports wherever openness is genuinely present, but its distinctive content is absent, an artifact of the chosen partition, or pinned near a floor by the training objective, and the operationally useful uncertainty turns out to be epistemic, living in the closed half of the correspondence, not the open one. The negative has a structural reason this note makes precise: the open case needs an eliminated sector with a continuous spectrum and wave-like, not relaxational, dynamics, which mainstream learning's finite or dissipative objects do not supply. This is a note, not a result; its main finding is that negative one, and its value is the map that locates it.

The prediction of masses of atomic nuclei using machine learning can complement theoretical models and advance the exploration of poorly known domains of the nuclear chart. We propose a machine learning technique based on gated recurrent units (GRU), which have demonstrated competitive performance in nuclear-mass prediction by exploiting long-term dependencies. By integrating multiplicative interactions and product-unit transformations within recurrent units, we report significant improvements in nuclear-mass prediction. Computations are performed in the complex domain to jointly capture amplitude and phase dynamics. For interpolation and temporal-extrapolation tasks based on the atomic mass evaluation (AME2016 and AME2020), the complex additive-multiplicative product-unit gated recurrent unit (AM-PU-GRU) model consistently achieves the lowest prediction errors, with an interpolation RMSE of 0.227 $\pm$ 0.004 MeV and an extrapolation RMSE of 0.179 $\pm$ 0.015 MeV. These results surpass other state-of-the-art machine learning models and also outperform the real-valued GRU baseline and product-unit ablation variants, while remaining robust to different theoretical priors, including WS4 and SEMF. Our findings establish complex-valued product-unit recurrent networks as a new benchmark for sequence-based nuclear-mass prediction.

The validation of advanced nuclear reactor designs and fuel concepts requires critical experiments with high neutronic similarity to the target technology. Neutronic similarity is quantified by the correlation coefficient $c_k$, which captures the shared bias in $k_\text{eff}$ induced by uncertainties in nuclear data. Generally, a $c_k\geq0.9$ is needed for an experiment to be sufficiently similar to a target technology. This work presents a methodology for the inverse design of critical experiments. Deep neural network surrogate modeling and nonparametric gradient optimization are used to generate experiment geometries that maximize $c_k$. A deep neural network is trained on OpenMC-calculated sensitivity vectors for grid-based critical experiment geometries. The model architecture combines a U-Net convolutional encoder-decoder with a novel multigroup attention pooling layer, introduced to capture the differing spatial dependencies of sensitivities. Multigroup attention pooling is shown to achieve better performance than traditional pooling, as well as interpretable internal behavior. The differentiability of the surrogate enables gradient-based optimization of the full combinatorial design space, allowing $c_k$ to be maximized by directly changing the material assignment of each position in the geometry grid. The method is applied to the validation of the TN-Americas TN-LC transportation cask with HALEU fuel, for which existing critical experiment coverage is limited. The optimization procedure is shown to produce experiment geometries achieving $c_k$ scores of 0.97757, 0.81324, and 0.93276 for three configurations of interest. This approach demonstrates the potential of deep learning and gradient optimization to accelerate the development of advanced nuclear technology.

In modern nuclear physics experiments, identifying events of interest is challenging for nuclear reaction studies with the active target Time Projection Chamber (TPC). In this work, machine learning techniques are employed to analyze the complex data of the 12C + 12C fusion reaction from a TPC named MATE (multi-purpose active-target time projection chamber for nuclear experiments). Specifically, we successfully applied Residual Neural Network (ResNet-50, ResNet-34 and ResNet-18) and Visual Geometry Group (VGG-19) to classify elastic scattering and fusion reaction events from the 12C + 12C reaction. The classification results of the four models are nearly identical, with accuracies of approximately 97% for the simulated data and 90% for the experimental data. Moreover, these approaches successfully identify some events that are misclassified by traditional methods. These models are also applied to classify events from different fusion reaction channels, with classification accuracies of approximately 95% on simulated data. In addition, a Convolutional Neural Network (CNN) model is developed to reconstruct the reaction vertex, providing an alternative strategy for vertex reconstruction. These results indicate that machine learning techniques can effectively classify reaction events from different channels and reconstruct the reaction vertex, thereby paving the way for future analyses of complex nuclear reaction data.

Large Language Model (LLM)-based multi-agent systems rely on optimized collaboration topologies to balance performance and communication costs. However, current methods struggle with the inherent stability-extensibility trade-off and often misalign computational budgets with query difficulty. We propose \textsc{ATOM}, an adaptive framework that generates budget-controllable collaboration graphs via a novel task-driven reinforcement learning paradigm. Inspired by atomic structures, \textsc{ATOM} employs a nucleus-electron hierarchy: it maintains a stable, offline-learned collaboration backbone (the nucleus) while dynamically activating query-conditioned agents (electrons) during inference. Crucially, a complexity-aware budgeting strategy aligns resource consumption with task demands by estimating query difficulty to strictly regulate electron instantiation. Extensive experiments across six diverse benchmarks demonstrate that \textsc{ATOM} achieves state-of-the-art performance while improving token efficiency by up to $30\%$ compared to strong baselines.

Neural operators (NOs) are designed to learn maps between infinite-dimensional function spaces. We propose a novel reframing of their use. By introducing an auxiliary base-space, any finite-dimensional function can be viewed as an operator acting by composition on functions of the base-space. Through a range of benchmarks on analytic functions of increasing complexity and dimensionality, we demonstrate that NOs can match or outperform standard multilayer perceptrons and Kolmogorov--Arnold Networks in accuracy while requiring significantly fewer parameters and training time. As a real-world application, we apply a two-dimensional Tensorized Fourier Neural Operator (TFNO) to the nuclear chart, learning a correction to state-of-the-art nuclear mass models as a partially observed residual field. A TFNO ensemble reaches a held-out root-mean-square error of 198.2 keV, placing it among the best recent neural-network approaches while retaining high parameter efficiency and short training times. More broadly, these results introduce NOs as a scalable framework for finite-dimensional function interpolation, from analytic benchmarks to structured scientific data.

We introduce a new strategy for compositional neural surrogates for radiation-matter interactions, a key task spanning domains from particle physics through nuclear and space engineering to medical physics. Exploiting the locality and the Markov nature of particle interactions, we create a \emph{next-particle prediction} kernel using hybrid discrete-continuous transformer models based on Riemannian Flow Matching on product manifolds. The model generates variable-sized typed sets of particles and radiation side effects that are the result of the interaction of an incident particle with a material volume. The resulting kernel can be composed to simulate unseen large-scale material distributions in a zero-shot manner. Unlike mechanistic simulators, our model is designed to be differentiable, provides tractable likelihoods for future downstream applications. A significant computational speed-up on GPU compared to CPU-bound mechanistic simulation is observed for single-kernel execution. We evaluate the model at the kernel level and demonstrate predictive stability over multi-round autoregressive rollouts. We additionally release a novel 20M-event radiation-matter interaction dataset for further research.

Glassy silica is a foundational material in optics and electronics, yet accurately predicting its medium-range order (MRO) remains a major challenge for machine-learning interatomic potentials (MLIPs). While local MLIPs reproduce the short-range SiO4 tetrahedral network well, it remains unclear whether locality alone is sufficient to recover the first sharp diffraction peak (FSDP), the principal experimental signature of MRO. Here, we combine neutron and X-ray diffraction measurements with large-scale molecular dynamics driven by two MACE-based models: a short-range (SR) potential and a long-range (LR) extension incorporating reciprocal-space gated attention. The SR model systematically over-structures the network, producing an overly intense FSDP in both the liquid and glassy states. Incorporating long-range interactions improves agreement with experiment for the liquid structure by reducing this excess ordering, but the LR model still fails to recover the experimental amorphous MRO after quenching. Ring-statistics and bond-angle analyses reveal that SR model exhibits an artificially narrow distribution dominated by six-membered rings, while the LR model produces a broader but still biased ring population. Despite preserving the correct tetrahedral geometry, both models show limited variability in Si-O-Si angles, indicating constrained network flexibility. These structural signatures demonstrate that both models retain excessive memory of the parent liquid network, leading to kinetically trapped and nonphysical medium-range configurations during vitrification. These results show that explicit long-range interactions are necessary but not sufficient for predictive modelling of disordered silica and suggest that accurate MRO further requires training data and sampling strategies that adequately represent the liquid-to-glass transition.

High-fidelity simulations and complex inverse problems, such as detector modeling and unfolding, are computationally intensive bottlenecks across subatomic physics, yet essential for accurate physical interpretation. While Conditional Flow Matching (CFM) offers a robust acceleration approach, we demonstrate its standard training loss is fundamentally misleading. Specifically, utilizing a Jefferson Lab Nuclear Physics (NP) kinematic dataset ($γp \to ρ^0 p \to π^+π^- p$), we expose that CFM loss plateaus prematurely, obscuring ongoing physical refinement. To verify this disconnect is a dataset-agnostic pathology, we introduce ScatterPrism, an efficient generative surrogate evaluated against both the NP data and synthetic stress tests modeling challenging 1D distribution topologies. Coupling these benchmarks, we establish that physics-informed metrics continue improving long after standard loss converges. Consequently, we propose a multi-metric diagnostic protocol to ensure true kinematic fidelity without data memorization. Driven by NP challenges relevant to the forthcoming Electron-Ion Collider (EIC), this unified machinery has strong potential to extend to High-Energy Physics (HEP) applications, such as jet modeling. Furthermore, the framework holds promise for broader domains requiring rigorous generative reliability, including medical imaging, astrophysics, and quantitative finance.

Background and Objective: Precise and scalable instance segmentation of cell nuclei is a fundamental prerequisite for computational pathology, yet gigapixel whole-slide images (WSIs) pose significant computational challenges. While patch-based processing is standard during training, existing methods are often limited to small tile sizes during inference due to architectural bottlenecks or reliance on computationally expensive post-processing for instance separation. We introduce a faster, scalable, and end-to-end framework capable of processing large-scale image tiles while accurately modeling biologically realistic overlapping nuclei. Methods: We propose LSP-DETR (Local Star Polygon DEtection TRansformer). The model represents nuclei as star-convex polygons and employs a lightweight transformer with linear complexity, enabling the processing of high-resolution images in a single forward pass. A novel radial distance loss accommodates annotation uncertainty, allowing the segmentation of overlapping nuclei to emerge naturally without explicit overlap labels. Results: LSP-DETR achieves state-of-the-art efficiency, with an inference time of 0.45 s/mm^2, a 3.2x speedup over StarDist, the next-fastest method. On PanNuke, the model achieves competitive accuracy (67.5 bPQ), while yielding an F$_1$-score of 0.964 in polygon overlap when evaluated against consensus annotations from two expert pathologists. Furthermore, it outperforms larger models such as LKCell in generalization robustness, reaching an F1-score of 85.0 on MoNuSeg. Conclusions: LSP-DETR bridges the gap between high-fidelity segmentation and practical clinical requirements by eliminating heuristic post-processing. By providing a scalable, linear-complexity solution that naturally handles overlaps between nuclei, this framework sets a new direction for efficient high-throughput WSI analysis in digital pathology.