Overview

Robot trajectory tracking studies how a robot can follow a desired path or time-varying motion, which is essential for tasks such as manipulation, navigation, flight, and locomotion. Common approaches include feedback control such as PID, backstepping, and sliding-mode methods; model-predictive control; and adaptive, learning-based, and iterative-learning controllers that compensate for uncertain dynamics or repeated errors. Work spans mobile robots, aerial vehicles, manipulators, soft robots, and humanoids, with attention to sensing, actuator limits, collision avoidance, and real-time computation. A central challenge is balancing precise tracking with robustness and safety when models, terrain, payloads, contact, or reference motions change.

Latest papers

153 papers17 papers in the last four weeks, up 13% on the four weeks before. 0.1% of all new papers.

Jun 5, 2025

A Three-Stage Offline SDRE-Based Control Framework for Human Motion Reproduction on a Suspended Bipedal Robot

This paper presents a three-stage offline command generation framework for reproducing human lower-limb motion on a suspended bipedal robot while matching torque trajectories computed from the robot dynamic model. First, State-Dependent Riccati Equation (SDRE) control derives the reference torque trajectory for the measured motion. Second, parameterized optimization converts this trajectory into trapezoidal joint velocity commands under motor speed and acceleration limits. Third, a proportional-integral-derivative linear quadratic regulator (PID-LQR) compensation scheme refines these commands using experimental tracking data. The platform executes the resulting profiles to reproduce human walking and squatting motions recorded by a Vicon system, allowing evaluation of tracking accuracy and repeatability. Results show that the average root mean square error (RMSE) and standard deviation (STD) of joint angles across repeated trials remain below 7° and 0.33°, respectively. Joint angle and torque trajectory comparisons show lower maximum RMSE and STD values than those for MPC and IPSO-PID in every reported case. The framework enables accurate and repeatable motion reproduction within actuator limits, providing controlled and measurable conditions that can reduce reliance on human participation and associated risks during preliminary evaluation of devices for assistive walking, gait training, and rehabilitation.
Mar 25, 2025

Design of an Underwater Vehicle With Orientation-Adjustable Thrusters and Adaptive Tracking Control

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.
Mar 18, 2025

Learning-Based Progressive Barrier Control for Robot Manipulators with Initial Errors Outside Prescribed Tracking Bounds

Robot manipulators may start a new task with a tracking error larger than the prescribed tolerance. Conventional barrier controllers generally require the initial error to lie within this tolerance, which prevents their direct use under such conditions. This paper develops a progressive barrier controller that gradually contracts an initial error bound to the required value within a prescribed time. The robot can therefore start outside the final bound, while the direct joint-position error satisfies it after the transition. The closed-form control law combines progressive barrier feedback with an online adaptive torque term based on an actor--critic structure. A Lyapunov analysis establishes bounded closed-loop signals and gives sufficient conditions for satisfaction of the final tracking bound. Two-link simulations consider large initial errors, actuator saturation, dynamic variations, disturbances, and measurement errors. The adaptive term reduces the median root-mean-square tracking error by 45.1% compared with the zero-weight progressive barrier controller. The simulations also map the initial errors that can be handled at different transition times under fixed torque limits. Finally, an experiment on a Niryo Ned3 Pro illustrates tracking performance using measured position and motor-current data.