Thermal Imaging

Thyroid cancer is said to be the second most common type of cancer in female individuals and the third in males by 2030, according to projections. In general, detecting cancer in its early stages improves the chance of survival of the individual. Thermography is a diagnostic tool that has been increasingly used to detect cancer and abnormalities, including that of thyroid. Various methods to segment and detect hot regions in thermograms and, consequently, to detect suspicious tissues present in these images have been proposed. It is well known that medical diagnosis yields a great deal of information. Thus, physicians have to comprehensively analyse and evaluate this information in a short period of time, which is infeasible in most cases. In this work, we perform a general review of thermography , focusing on the thyroid analysis. We propose protocols for image acquisiton and an autonomous registration for thyroid images. We also perform analyses of the image data, which include feature extraction, image processing, and a possible approach for classification of healthy or unhealthy patients. In summary, this work presents a pilot project for detection of tumors in our university hospital, which is part of an effort to support preventive medical actions in our endocrinology department. Under some future adjustments, this project will be submitted for approval by the ethics and research committee of Hospital Universitário Antonio Pedro at Universidade Federal Fluminense (HUAP-UFF) and to the Brazilian Ministry of Health Ethical committee under the name: Evaluation of the importance of thermography to aid diagnosis of thyroid nodules of patients in HUAP-UFF (in Portuguese: Avaliação da importância da termografia no auxílio à investigação diagnóstica de nódulos tireoidianos em pacientes acompanhados no HUAP-UFF).

Vision-language models (VLMs) often fail under low illumination because their visual grounding is learned predominantly from RGB imagery, whereas thermal infrared preserves complementary scene structure when visible cues degrade. We present Thermo-VL, a wavelength-aware VLM that augments a frozen Molmo-7B backbone with a trainable thermal encoder and a text-guided dual-attention fusion module. Given aligned RGB tokens, thermal tokens, and prompt embeddings, the fusion module conditions thermal features on both language and RGB context, then injects a gated residual into the frozen RGB stream so thermal evidence can be incorporated without disrupting Molmo's pretrained RGB-language interface. We train the model with the standard language-modeling objective together with auxiliary alignment and regularization losses that improve cross-modal grounding and reduce over-reliance on RGB. We also introduce a pixel-aligned RGB-thermal instruction-tuning dataset and Thermo-VL-Bench, a manually screened RGB-thermal VQA benchmark for low-light and cross-spectrum reasoning. Experiments show strong gains on challenging thermal-only and RGB+thermal reasoning tasks, highlighting the value of prompt-conditioned multispectral fusion. Our dataset and code are publicly available at: https://thusharakart.github.io/Thermo-VL

Paired RGB-thermal data has shown significant utility across a range of applications, including image fusion, object tracking, and anomaly detection; however, its broader adoption is constrained by the limited availability of aligned RGB-thermal image pairs. RGB-to-thermal (and vice versa) image translation has emerged as a practical solution to this challenge. Prior approaches including conditional generative adversarial networks (cGANs) such as ThermalGAN and Scalable Interpolant Transformer (SiT)-based architectures such as ThermalGen have demonstrated strong potential for aerial-to-thermal image translation. In this work, we explore alternative architectures that prioritize simplicity while maintaining performance. Specifically, we propose a conditional U-Net that incorporates weather data at the bottleneck layer, complemented by targeted preprocessing and post-processing techniques applied within the Pix2Pix GAN architecture. We utilize a training set of 612 paired RGB and thermal images, and evaluate over 5-fold cross-validation, ultimately testing on a held-out test set. Our conditional U-Net model performed best, with a peak signal-to-noise ratio (PSNR) of 14.5485, structural similarity index measure (SSIM) of 0.8095, and learned perceptual image patch similarity (LPIPS) of 0.1666. These results outperformed the base ThermalGen model, which attained PSNR, SSIM, and LPIPS scores of 7.56, 0.2444, and 0.6317 respectively. We find that while saturation boost and contrast enhancement for preprocessing and Gaussian blur for post-processing provide observable improvements, the incorporation of conditioning data was most effective. Our findings cement the potential of integrating auxiliary metadata into thermal image generation, suggesting that such information can serve as a proxy for environmental conditions critical to accurate thermal reconstruction.

While RGB-Thermal crowd counting has shown promise, the paradigm faces critical limitations: RGB data raises privacy concerns in public surveillance, and multi-modal misalignment degrades fusion performance. We propose the first thermal-only framework specifically designed for privacy-conscious crowd counting, eliminating RGB dependency at inference time and substantially reducing the privacy exposure associated with continuous RGB capture in public surveillance deployments. To mitigate thermal ambiguity, we leverage depth-to-RGB diffusion models as a cross-modal bridge, extracting discriminative features that enhance thermal representations. Critically, we demonstrate that single-step LCM denoising yields features most faithful to the structural content of the depth conditioning signal, while multi-step approaches progressively decouple features from the conditioning input and accumulate errors that degrade counting accuracy. Experiments on RGBT-CC and DroneRGBT datasets show our method achieves competitive performance against state-of-the-art RGB-T fusion methods, while requiring only thermal input during inference, eliminating the need for continuous RGB capture that constitutes the primary privacy concern in real-world surveillance deployment. The code will be made publicly available.

Accurate geometric calibration of RGB-thermal infrared (TIR) stereo camera systems is essential for multimodal building envelope analysis, yet remains challenging when low-cost thermal sensors with very low spatial resolution are employed. This paper presents a practical stereo calibration framework for an RGB camera (2028 x 1520 px) paired with a TIR camera operating at only 80 x 62 px - a pixel-count ratio of approximately 1:625. An active OLED screen dynamically switches modality-specific patterns (checkerboard for TIR, ChArUco for RGB) on a single physical surface, providing controlled and repeatable thermal contrast. A dedicated corner detection algorithm combining perspective rectification, Hessian saddle-point analysis, and Mean Shift localisation achieves reliable checkerboard detection at 80 x 62 px without per-frame parameter tuning. A baseline-constrained bundle adjustment enforces physically consistent rig geometry under the planar-calibration-object degeneracy, yielding a stereo baseline of 32.7 mm (nominal 30 mm) with an overall reprojection error of 0.382 px. The system is validated on a thermally active building mock-up using constant-depth and per-pixel depth estimation, demonstrating consistent TIR-to-RGB projection suitable for building energy performance assessment.

Thermal-infrared (TIR) hyperspectral imagery (HSI) provides critical scene information for various applications. However, its practical utility is severely limited by unique sensor degradations beyond the capabilities of existing restoration methods, which are ignorant of underlying thermal physics. Here, we propose HAIR (HADAR-based Image Restoration) as a physics-driven framework for ground-based TIR-HSI restoration. HAIR utilizes the HADAR rendering equation (HRE) and combines it with the atmospheric downwelling radiative transfer equation (RTE) to model TIR-HSI using temperature, emissivity, and texture (TeX) physical triplets. This physical model leads to a TeX decompose-synthesize strategy that guarantees physical consistency and spatio-spectral noise resilience, in stark contrast to existing approaches. Moreover, our framework uses a forward-modeled atmospheric downwelling reference, along with spectral smoothness of emissivity and blackbody radiation, to enable spectral calibration and generation that would otherwise be elusive. Our extensive experiments on the outdoor DARPA Invisible Headlights dataset and in-lab FTIR measurements show that HAIR consistently outperforms state-of-the-art methods across denoising, inpainting, spectral calibration, and spectral super-resolution, establishing a benchmark in objective accuracy and visual quality.

Identification of less-articulated objects using single-channel images, such as thermal images, is important in many applications, such as surveillance. However, in this domain, existing methods show poor performance due to high similarity among objects of the same category in the absence of color information (overlooking shape information) and de-emphasized texture information. Furthermore, variability in viewpoint adds more complexity as the features vary from side to side. We address these issues by constructing viewpoint-conditioned feature vectors and area-specific feature comparisons in separate feature spaces. These interventions enable leveraging the advancements of existing RGB-pre-trained ViT feature extractors while effectively adapting them to address the challenges specific to the thermal domain. We test our system with RGBNT100 (IR) vehicle dataset and a thermal maritime dataset acquired by us. Our results surpass the state-of-the-art methods by 19.7% and 12.8% for the above datasets in mAP scores, respectively. We also plan to make our thermal dataset available, the first of its kind for maritime vessel identification.

This work presents ThermoMesh, a passive thin-film thermoelectric mesh sensor designed to detect and characterize spatio-temporally sparse heat sources through conduction-based thermal imaging. The device integrates thermoelectric junctions with linear or nonlinear interlayer resistive elements to perform simultaneous sensing and in-sensor compression. We focus on the single-event (1-sparse) operation and define four performance metrics: range, efficiency, sensitivity, and accuracy. Numerical modeling shows that a linear resistive interlayer flattens the sensitivity distribution and improves minimum sensitivity by approximately tenfold for a $16\times16$ mesh. Nonlinear temperature-dependent interlayers further enhance minimum sensitivity at scale: a ceramic negative-temperature-coefficient (NTC) layer over 973-1273K yields a $\sim14{,}500\times$ higher minimum sensitivity than the linear design at a $200\times200$ mesh, while a VO$_2$ interlayer modeled across its metal-insulator transition (MIT) over 298-373K yields a $\sim24\times$ improvement. Using synthetic 1-sparse datasets with white boundary-channel noise at a signal-to-noise ratio of 40dB, the VO$_2$ case achieved $98\%$ localization accuracy, a mean absolute temperature error of $0.23$K, and a noise-equivalent temperature (NET) of $0.07$K. For the ceramic-NTC case no localization errors were observed under the tested conditions, with a mean absolute temperature error of $1.83$K and a NET of $1.49$K. These results indicate that ThermoMesh could enable energy-efficient embedded thermal sensing in scenarios where conventional infrared imaging is limited, such as molten-droplet detection or hot-spot monitoring in harsh environments.

Thermal infrared image enhancement aims to restore high-quality images from complex compound degradations. Existing all-in-one approaches typically employ a single shared backbone to handle diverse degradations, which causes gradient interference and parameter competition. To address this, we propose a Structural Entropy-Guided Decoupled (SEGD) Framework. Unlike unified modeling paradigms, SEGD decomposes compound degradations into independent sub-processes and models them in a divide-and-conquer manner through Degradation-Specific Residual Modules (DRMs). Each DRM focuses on residual estimation for a specific degradation, enabling task decoupling while remaining jointly trainable, which mitigates parameter contention. A Degradation-Aware Evidential Network further estimates degradation type and intensity, providing priors that adaptively regulate DRM restoration strength. To handle compound cases, DRMs are composed in varying orders to form multiple restoration paths, from which the most informative features are aggregated under a structural-entropy criterion, yielding decoder-ready representations with structural fidelity and degradation awareness. Integrating divide-and-conquer restoration, evidential perception, and entropy-guided adaptation, SEGD achieves fine-grained and interpretable enhancement. We also construct a nighttime TIR benchmark for evaluation under real low-light conditions. Experimental results demonstrate that SEGD surpasses state-of-the-art methods while achieving higher efficiency with fewer parameters.

Monitoring frying oil degradation is critical for food safety, yet current practice relies on destructive wet-chemistry assays that provide no spatial information and are unsuitable for real-time use. We identify a fundamental obstacle in thermal-image-based inspection, the camera-fingerprint shortcut, whereby models memorize sensor-specific noise and thermal bias instead of learning oxidation chemistry, collapsing under video-disjoint evaluation. We propose FryNet, a dual-stream RGB-thermal framework that jointly performs oil-region segmentation, serviceability classification, and regression of four chemical oxidation indices (PV, p-AV, Totox, temperature) in a single forward pass. A ThermalMiT-B2 backbone with channel and spatial attention extracts thermal features, while an RGB-MAE Encoder learns chemically grounded representations via masked autoencoding and chemical alignment. Dual-Encoder DANN adversarially regularizes both streams against video identity via Gradient Reversal Layers, and FiLM fusion bridges thermal structure with RGB chemical context. On 7,226 paired frames across 28 frying videos, FryNet achieves 98.97% mIoU, 100% classification accuracy, and 2.32 mean regression MAE, outperforming all seven baselines.

Wildfire monitoring requires timely, actionable situational awareness from airborne platforms, yet existing aerial visual question answering (VQA) benchmarks do not evaluate wildfire-specific multimodal reasoning grounded in thermal measurements. We introduce WildFireVQA, a large-scale VQA benchmark for aerial wildfire monitoring that integrates RGB imagery with radiometric thermal data. WildFireVQA contains 6,097 RGB-thermal samples, where each sample includes an RGB image, a color-mapped thermal visualization, and a radiometric thermal TIFF, and is paired with 34 questions, yielding a total of 207,298 multiple-choice questions spanning presence and detection, classification, distribution and segmentation, localization and direction, cross-modal reasoning, and flight planning for operational wildfire intelligence. To improve annotation reliability, we combine multimodal large language model (MLLM)-based answer generation with sensor-driven deterministic labeling, manual verification, and intra-frame and inter-frame consistency checks. We further establish a comprehensive evaluation protocol for representative MLLMs under RGB, Thermal, and retrieval-augmented settings using radiometric thermal statistics. Experiments show that across task categories, RGB remains the strongest modality for current models, while retrieved thermal context yields gains for stronger MLLMs, highlighting both the value of temperature-grounded reasoning and the limitations of existing MLLMs in safety-critical wildfire scenarios. The dataset and benchmark code are open-source at https://github.com/mobiiin/WildFire_VQA.

Human-machine interfaces in industrial automation need sensing modules that monitor operator actions and physiological state. This is important in factories, vehicles, machinery cabins, and human-robot collaboration, where workload, stress, fatigue, or reduced attention can affect safety. RGB monitoring is limited by low light, shadows, and privacy concerns, while thermal infrared imaging captures skin temperature dynamics without visible illumination. This paper studies thermal video as a contactless computer vision modality for estimating electrodermal activity (EDA), heart rate (HR), and breathing rate (BR), with the goal of supporting adaptive human-machine interfaces and operator-state awareness. We propose a signal-processing pipeline that tracks facial regions, aggregates thermal signals, and separates slow sudomotor trends from faster cardiorespiratory components. HR is estimated using orthogonal matrix image transformation (OMIT) across multiple facial regions, while BR is estimated from nasal and cheek thermal signals using spectral peak detection. We characterize 288 ROI-method configurations against contact references with lag-tolerant metrics using 31 sessions from the public SIMULATOR STUDY 1 (SIM1) driver monitoring dataset. The best fixed EDA configuration reaches a mean absolute correlation of $0.40 \pm 0.23$ against palm EDA, with individual sessions reaching $0.89$. BR estimation achieves $3.1 \pm 1.1$ bpm mean absolute error, while HR estimation yields $13.8 \pm 7.5$ bpm MAE, limited by the $7.5$ Hz thermal camera frame rate. The results show that thermal video provides useful respiratory and sudomotor cues, while revealing limitations caused by ROI selection, polarity changes, latency, and subject variability. These findings provide baseline design guidance for thermal computer vision as an auxiliary sensing layer in adaptive industrial HMI systems.

Multi-modal scene reconstruction integrating RGB and thermal infrared data is essential for robust environmental perception across diverse lighting and weather conditions. However, extending 3D Gaussian Splatting (3DGS) to multi-spectral scenarios remains challenging. Current approaches often struggle to fully leverage the complementary information of multi-modal data, typically relying on mechanisms that either tend to neglect cross-modal correlations or leverage shared representations that fail to adaptively handle the complex structural correlations and physical discrepancies between spectrums. To address these limitations, we propose ThermoSplat, a novel framework that enables deep spectral-aware reconstruction through active feature modulation and adaptive geometry decoupling. First, we introduce a Spectrum-Aware Adaptive Modulation that dynamically conditions shared latent features on thermal structural priors, effectively guiding visible texture synthesis with reliable cross-modal geometric cues. Second, to accommodate modality-specific geometric inconsistencies, we propose a Modality-Adaptive Geometric Decoupling scheme that learns independent opacity offsets and executes an independent rasterization pass for the thermal branch. Additionally, a hybrid rendering pipeline is employed to integrate explicit Spherical Harmonics with implicit neural decoding, ensuring both semantic consistency and high-frequency detail preservation. Extensive experiments on the RGBT-Scenes dataset demonstrate that ThermoSplat achieves state-of-the-art rendering quality across both visible and thermal spectrums.

The increasing accessibility of radiometric thermal imaging sensors for unmanned aerial vehicles (UAVs) offers significant potential for advancing AI-driven aerial wildfire management. Radiometric imaging provides per-pixel temperature estimates, a valuable improvement over non-radiometric data that requires irradiance measurements to be converted into visible images using RGB color palettes. Despite its benefits, this technology has been underutilized largely due to a lack of available data for researchers. This study addresses this gap by introducing methods for collecting and processing synchronized visual spectrum and radiometric thermal imagery using UAVs at prescribed fires. The included imagery processing pipeline drastically simplifies and partially automates each step from data collection to neural network input. Further, we present the FLAME 3 dataset, the first comprehensive collection of side-by-side visual spectrum and radiometric thermal imagery of wildland fires. Building on our previous FLAME 1 and FLAME 2 datasets, FLAME 3 includes radiometric thermal Tag Image File Format (TIFFs) and nadir thermal plots, providing a new data type and collection method. This dataset aims to spur a new generation of machine learning models utilizing radiometric thermal imagery, potentially trivializing tasks such as aerial wildfire detection, segmentation, and assessment. A single-burn subset of FLAME 3 for computer vision applications is available on Kaggle with the full 6 burn set available to readers upon request.