BIM Informed Visual SLAM for Construction Environments

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual Simultaneous Localization and Mapping (SLAM) and floor plan-referenced localization systems are required. In this paper we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across seven floors over an eight-month period of the construction project. Ground truth trajectories were collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor-plan-referenced localization, reflecting the broader maturity of SLAM methods. The higher errors in localization further highlight the difficulty of this task in construction and point to the need for continued research, which this dataset is intended to support. The dataset and the benchmark are publicly available at: https://hilti-trimble-challenge.com/dataset-2026.

Accurate and robust localization is a fundamental requirement for service and inspection robots, particularly in feature-sparse indoor environments where traditional systems struggle due to a lack of distinct landmarks. While prior maps can enhance robustness, precise and compact maps capturing real-world details are often unavailable for new or frequently changing environments. This paper presents BIM-Loc, a novel discrepancy-aware LiDAR-based localization method that directly integrates Building Information Models (BIM) from the design phase. BIM-Loc simultaneously estimates trajectories aligned with the BIM coordinate system and identifies discrepancies between real-world observations and the as-designed BIM in an online fashion. Our core contributions include: (1) a novel multi-hit ray casting strategy for efficient BIM-point data association and projection of 3D observations into 2D texture space; (2) a pose graph optimization framework with BIM-integrated factors that enforces consistency among odometry, sequential scans, and BIM structures; and (3) a hierarchical Bayesian inference module that incrementally updates a continuous 2D surface representation for discrepancy detection, propagating updates from the pixel to the structure level. Extensive evaluations in both simulation and real-world applications demonstrate that BIM-Loc significantly outperforms state-of-the-art map-based methods in localization accuracy and robustness.