Does the testing environment matter? Carsickness across on-road, test-track, and driving simulator conditions

Scenario-based testing with driving simulators is extensively used to identify failing conditions of automated driving assistance systems (ADAS). However, existing studies have shown that repeated test execution in the same as well as in distinct simulators can yield different outcomes, which can be attributed to sources of flakiness or different implementations of the physics. In this paper, we present MultiSim, a novel approach to multi-simulation ADAS testing based on a search-based testing approach that leverages an ensemble of simulators to identify failure-inducing, simulator-agnostic test scenarios. During the search, each scenario is evaluated jointly on multiple simulators. Scenarios that produce consistent results across simulators are prioritized for further exploration, while those that fail on only a subset of simulators are given less priority, as they may reflect simulator-specific issues rather than generalizable failures. Our empirical study, which involves testing three lane-keeping ADAS on different pairs of three widely used simulators, demonstrates that MultiSim outperforms single-simulator testing by achieving, on average, a higher rate of simulator-agnostic failures by 66%. Compared to a state-of-the-art multi-simulator approach that combines the outcome of independent test generation campaigns obtained in different simulators, MultiSim identifies, on average, up to 3.4X more simulator-agnostic failing tests and higher failure rates. To avoid the costly execution of test inputs on which simulators disagree, we propose to predict simulator disagreements and bypass test executions. Our results show that utilizing a surrogate model during the search retains the average number of valid failures and also improves efficiency. Our findings indicate that combining an ensemble of simulators is a promising approach for the automated cross-replication in ADAS testing.

While end-to-end autonomous driving systems show promise, their application to micromobility vehicles is hindered by simulators failing to capture specific kinematics, such as differential drives and omni-wheels. This paper pro- poses a sim-to-real-aware, vehicle-specific end-to-end learning environment for the WHILL Model CR on AWSIM and ROS 2. To minimize the sim-to-real gap, physical parameters are optimized via Bayesian optimization using real-world data, reducing trajectory errors across various driving scenarios. Additionally, this study introduces a synchronized architecture tailored for the stable training of world model-based agents. An end-to-end policy trained with DreamerV3 exhibited learning progress and achieved task completion in a simulated obstacle avoidance setting. Furthermore, this policy demonstrated direct sim-to-real transfer to the physical vehicle, enabling the vehicle to navigate around a cardboard box in a real-world corridor replica without fine-tuning. This paper provides a practical foundation for sim-to-real micromobility policy studies.

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D