In this paper, we present an online method for converting an arbitrary geometric path, represented by a sequence of states, and generated by any planner (e.g., sampling-based planners such as RRT or PRM, search-based planners such as ARA*, etc.), into a kinematically feasible, jerk-limited trajectory. The method generates a sequence of quintic/quartic splines that can be discretized at a user-specified control rate and streamed to a low-level robot controller. Our approach enables real-time adaptation to environmental changes and can be re-invoked at any instant to generate a new trajectory from the robot's current state to a desired target state or sequence of states. Under a bounded-obstacle-velocity assumption, the method provides conditional stopping-safety guarantees over a finite time interval in dynamic environments, while allowing bounded geometric deviation from the original path. Kinematic constraints, including jerk limits, are explicitly considered. We validate the approach in a comparative simulation study against a competing method, demonstrating favorable behavior w.r.t. smoothness, computational time, and real-time performance, particularly with frequent target-state changes (up to 1 [kHz]). Real-robot experiments demonstrate applicability in real-world scenarios, including scenarios with a human as an obstacle.
Autonomous high-speed navigation through large, complex environments requires real-time generation of agile trajectories that are dynamically feasible, collision-free, and satisfy state or actuator constraints. Modern trajectory planning techniques primarily use numerical optimization, as they enable the systematic computation of high-quality, expressive trajectories that satisfy various constraints. However, stringent requirements on computation time and the risk of numerical instability can limit the use of optimization-based planners in safety-critical scenarios. This work presents an optimization-free planning framework called STITCHER that stitches short trajectory segments together with graph search to compute long-range, expressive, and near-optimal trajectories in real-time. STITCHER outperforms modern optimization-based planners through our innovative planning architecture and several algorithmic developments that make real-time planning possible. Extensive simulation testing is performed to analyze the algorithmic components that make up STITCHER, along with a thorough comparison with three state-of-the-art optimization planners. Simulation tests show that safe trajectories can be created within a few milliseconds for paths that span the entirety of two 50 m x 50 m environments. Hardware tests with a custom quadrotor verify that STITCHER can produce trackable paths in real-time while respecting nonconvex constraints, such as limits on tilt angle and motor forces, with flight speeds up to 63 km/h.
We present GASP, a GPU-Accelerated Safe Planner for real-time, collision-aware joint-space motion generation in known environments. GASP combines a clamped B-spline trajectory parameterization with a convolutional residual neural network that predicts the free interior control points, while analytically inserted boundary control points enforce initial and final derivative constraints for collision-aware planning under non-stationary conditions. A conditional variational autoencoder samples multiple trajectory candidates, which are decoded and validated in parallel on the GPU, yielding a batched planner for collision-aware coupled joint-space motion with near-millisecond inference. We validate GASP as an online motion-generation module, where it achieves analytical-level success rates with high collision-aware feasibility and substantially reduces inference time relative to GPU-based trajectory optimization. We further deploy GASP as a reinforcement-learning reset planner in competitive robotic table tennis, matching the baseline return rate while roughly halving training-time collisions.
Robots that leave structured, static environments must plan motions that are kinodynamically feasible and safe among moving obstacles. However, there are no dedicated benchmark frameworks that combine both aspects. To overcome this, we present DynoFluxBench, a framework to compare kinodynamic planners in known, dynamic environments with unbounded arrival time. To demonstrate its utility and establish strong baselines, we develop three dedicated planners, named ST-Db-RRT, ST-GBRRT, and KIST, that fuse kinodynamic and space-time methods, covering different kinodynamic search paradigms: ST-Db-RRT expands with randomly selected discontinuity-bounded motion primitives using trajectory optimization, whereas KIST and ST-GBRRT maintain a kinodynamically feasible tree with different heuristic guidance. We analyze the probabilistic completeness guarantees of those new planners in dynamic environments. Finally, we evaluate ST-Db-RRT, ST-GBRRT, and KIST using DynoFluxBench, showing that ST-Db-RRT reaches a first solution up to 32 times faster, while KIST and ST-GBRRT remain valuable where trajectory optimization is fragile. Videos and further analysis can be found at https://dynofluxbench.github.io/dynofluxbench/.