Characterization, Analytical Planning, and Hybrid Force Control for the Inspire RH56DFX Hand

Robust dexterous grasping requires maintaining physical stability despite contacts interactively evolving across the entire hand. A precomputed force distribution can easily fail under object motion, modeling errors, or external disturbances. In this paper, we present a framework for real-time force regulation over dynamically changing whole-hand contacts. Our method geometrically estimates contacts across all hand links using a tracked object model and proprioception, without requiring tactile sensing at those contacts. It repeatedly recomputes the desired contact-force distribution subject to friction constraints, actuator limits, and an actuation-consistency constraint motivated by classical whole-limb force analysis. We integrate this force-regulation controller with reactive reaching, enabling the hand to acquire a grasp, maintain it under disturbances, and regrasp after losing the object. Simulation experiments without gravity demonstrate improved grasp retention over fixed-allocation and fingertip-only execution under controlled perturbations, while real-world experiments on a 27-DoF arm-hand system demonstrate grasp maintenance and recovery under human-applied disturbances as contacts evolve across the whole hand. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/

Robotic dexterous hands are central to contact-rich manipulation, with rapid progress driven by advances in hardware, sensing, control, simulation, and data generation. However, existing studies are often developed under different assumptions regarding hand embodiments, sensory configurations, task settings, training data, and evaluation protocols, making systematic comparison difficult and obscuring the developmental trajectory of the field. This survey provides a holistic review of dexterous hand research from four complementary aspects. First, we present a hardware-level analysis covering actuation, transmission, perception, and representative hand designs, highlighting the key trade-offs in force capability, compliance, bandwidth, integration, and system complexity. Furthermore, we review control and learning methods for dexterous manipulation from a methodological perspective, grouping representative works by major paradigms and tracing their evolution in chronological order. In addition, we consolidate datasets, modality design, and evaluation practices, which enables methodological progress to be interpreted together with the ways in which it is trained, benchmarked, and assessed. Finally, we discuss the major limitations of current dexterous hand research and summarize the corresponding future directions. By connecting hardware analysis, methodological development, data resources, and evaluation, this survey aims to provide a structured understanding of dexterous hand research and to clarify the most important open challenges for future study.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.