Real-Time Force Regulation for Whole-Hand Dexterous Grasping

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

Dexterous grasping depends on contact regulation, not motion alone. Stable manipulation requires fingers to maintain appropriate object loading as contacts slip, deform, or become visually occluded. Existing cross-embodiment dexterous policies unify motion through retargeted hand poses or latent actions, but force feedback remains tied to each hand's sensing and actuation, limiting transfer. This work introduces a cross-embodiment force-position interface for contact-aware manipulation across heterogeneous dexterous hands. Motion intent is represented in a shared hand-pose latent, while each hand's effort signal is calibrated through system identification into physical joint torque in N.m. These torques are mapped to fingertip forces and compact per-finger load descriptors, giving the policy comparable observations of where the hand should move and how the object is loaded. Using this interface, a flow-matching visuomotor policy is trained on vision, proprioception, and calibrated contact, with structured visual masking that encourages reliance on force under grasp-relevant occlusion. The same calibrated signal drives a hybrid force-position controller for demonstration collection and execution, keeping force targets consistent across training and deployment. Experiments across structurally different hands show that calibrated contact feedback enables transferable compliant grasping, with learned primitives reusable in long-horizon manipulation pipelines.

While recent research has focused heavily on dexterous grasp pose generation, less attention has been devoted to the execution of planned grasps. Under shape and position uncertainty, open-loop execution often yields uncoordinated contacts, causing undesired in-hand object motion and even grasp failures. To address this, this paper proposes a tactile-driven model predictive controller for adaptive and delicate execution of diverse dexterous grasps. Our approach emphasizes multi-contact coordination across both approaching and grasping phases, with three key novelties: (i) coordination-aware phase separation, (ii) arm-hand coordination to compensate for position errors, and (iii) adaptive force coordination to increase contact forces in a balanced manner. An analytical model is employed to relate contact forces to robot joint motions for predictive control. Our formulation imposes no restrictions on grasp types or contact configurations and integrates seamlessly with state-of-the-art grasp pose generation methods. We validate the approach through large-scale simulations involving 15k grasps across 478 objects on three robotic hands, and real-world experiments on 8 objects. Results demonstrate that our method achieves higher grasp success rates and reduced undesired object movements.