An End-to-end Flight Control Network for High-speed UAV Obstacle Avoidance based on Event-Depth Fusion

Autonomous UAV flight in confined, wall-dense environments requires low-latency and reliable motion planning under strict safety constraints. Traditional optimization-based planners suffer from mapping latency and easily fall into local minima when navigating through dense structural obstacles. Meanwhile, existing end-to-end learning methods struggle to extract fine-grained geometric features from raw depth images and lack hard kinodynamic constraints, leading to unpredictable collisions near walls. To address these issues, we propose KIO-planner, an attention-guided single-stage trajectory planning framework. First, we integrate a Convolutional Block Attention Module (CBAM) into the perception backbone to adaptively focus on critical structural edges and traversable space. Second, we introduce a novel Dual Mapping mechanism--comprising physical bounds activation and a deterministic Geometric Safety Shield in the depth-pixel space--to enforce kinodynamic feasibility and collision-free flight without global map fusion. Extensive high-fidelity simulated experiments demonstrate that KIO-planner enables highly agile navigation at speeds up to 3.0 m/s. Compared to the state-of-the-art baseline, KIO-planner achieves lower inference latency (approximately 24 ms) and generates significantly smoother trajectories, reducing control cost by 28.4%. Most notably, our Dual Mapping substantially increases the worst-case safety margin, measured by minimum distance to obstacles, from 0.48 m to 0.76 m, ensuring fast, smooth, and safer navigation in highly constrained environments.

Obstacle avoidance in unmanned aerial vehicles (UAVs), as a fundamental capability, has gained increasing attention with the growing focus on spatial intelligence. However, current obstacle-avoidance methods mainly depend on limited field-of-view sensors and are ill-suited for UAV scenarios which require full-spatial awareness when the movement direction differs from the UAV's heading. This limitation motivates us to explore omnidirectional obstacle avoidance for panoramic drones with full-view perception. We first study an under explored problem setting in which a UAV must generate collision-free motion in environments with obstacles from arbitrary directions, and then construct a benchmark that consists of three representative flight tasks. Based on such settings, we propose Fly360, a two-stage perception-decision pipeline with a fixed random-yaw training strategy. At the perception stage, panoramic RGB observations are input and converted into depth maps as a robust intermediate representation. For the policy network, it is lightweight and used to output body-frame velocity commands from depth inputs. Extensive simulation and real-world experiments demonstrate that Fly360 achieves stable omnidirectional obstacle avoidance and outperforms forward-view baselines across all tasks. Our model is available at https://zxkai.github.io/fly360/

Vision-based Unmanned Aerial Vehicles (UAVs) often suffer from navigation failures in dead ends due to limited sensing accuracy and range. To address this challenge, this paper proposes a systematic solution for efficient dead-end prediction and avoidance. The proposed method introduces a lightweight neural network to predict the relative distance and bearing of potential dead ends within the current field of view using RGB-D inputs. These predictions prune a predefined, compact trajectory library, enabling the planner to proactively avoid dead ends while maintaining navigational smoothness. Notably, our approach transfers across real-world scenarios without manual annotation or fine-tuning on real-world data. The system achieves high-frequency replanning at 50 Hz onboard. Extensive simulation benchmarks demonstrate superior performance in success rate, flight time, and trajectory length, and real-world experiments further validate its effectiveness in complex scenarios.