cs.ROApr 24, 2026

Equivariant Filter for Radar-Inertial Odometry

Authors: Giulio DelamaJan MichalczykMorten NissovMartin ScheiberAlessandro FornasierKostas AlexisStephan Weiss

Abstract

Radar-Inertial Odometry (RIO) based on the Extended Kalman Filter (EKF) relies on accurate extrinsic calibration between the radar and the Inertial Measurement Unit (IMU) and is sensitive to disturbances, as large linearization errors can degrade performance or even cause divergence. To address these limitations, this letter proposes an Equivariant Filter (EqF) for RIO based on a Lie group symmetry that geometrically couples navigation states and IMU biases, extending it to incorporate radar-IMU extrinsic calibration and multi-state constraint updates. This equivariant formulation inherently preserves consistency and enhances robustness, enabling reliable state estimation even under poor or completely wrong initialization of calibration states. Real-world experiments on two different Uncrewed Aerial Vehicles (UAVs) show that the proposed EqF-RIO achieves state-of-the-art accuracy under correct extrinsic calibration and offers improved convergence under large calibration errors, where the conventional EKF-RIO fails. Evaluation code is open-sourced.

Explore similar work

Sep 14, 2026eess.SY

The Iterative Equivariant Filter

This paper presents the iterative equivariant filter (IterEqF). The iterative extended Kalman filter (IterEKF) replaces the standard EKF correction step with an iterative correction step that is the Gauss-Newton solution to a nonlinear weighted least squares problem. The standard equivariant filter (EqF) exploits and respects the underlying symmetry of state estimation problems posed on homogeneous spaces and Lie groups. The motivation behind the IterEqF is to combine the features of both the IterEKF and the EqF, thus leading to a high-performance state estimation solution that is well suited to navigation problems. This paper derives the iteration procedure for the IterEqF update step and shows how the intrinsic nonlinearity of the approach naturally results in a `reset' of the filter's covariance into new coordinates. Monte-Carlo simulations of range-based localisation for a mobile robot demonstrate the improvement in performance relative to a standard EqF, especially during the transient convergence.
Pieter van Goor, James Richard Forbes
Sep 17, 2026cs.RO

Equivariant Filter Design for Acoustic and Depth Aided Inertial Navigation Systems

Autonomous Underwater Vehicles (AUVs) navigating without GPS typically fuse inertial measurements with acoustic Doppler Velocity Log (DVL) velocities and pressure-derived depth. Posing the navigation state on a Lie group improves accuracy and consistency. However, state-of-the-art filters based on the Invariant Extended Kalman Filter (IEKF) append the Inertial Measurement Unit (IMU) biases as a Euclidean extension, which breaks the group-affine structure required for exact log-linear error dynamics, causing the reported covariance to degrade alongside the estimate. We apply the Tangent-Group (TG) symmetry, which carries the biases within the geometry of the state space, to derive an Equivariant Filter (EqF) for this system, leaving zero linearization error in the navigation states and second-order error only in the biases. We develop an equivariant output model for the DVL, whose update incurs only third-order linearization error, together with a direct pressure output. Monte Carlo simulations benchmark the TG-EqF against a Two-Frame-Group IEKF and a Multiplicative EKF. The TG-EqF reduces error by 18--25% against both alternatives in each of attitude, velocity, and position. The main benefit is in the covariance it estimates: its Average Normalized Estimation Error Squared (ANEES) stays closer to its nominal value of one than that of the others. Offline analysis on AUV field data corroborates the findings of the simulations, demonstrating reduced position drift.
Arihant Lunawat, Pieter van Goor, Frank Dellaert +1
Jun 23, 2026cs.RO

Invariant Kalman filtering for extended pose estimation in multi-IMU articulated rigid-body systems

Accurate extended pose estimation (orientation, velocity, and position) for IMU-instrumented articulated rigid-body systems is a key challenge in robotics and human motion analysis. The invariant extended Kalman filter (IEKF) addresses this problem for a single rigid body with convergence guarantees and consistency under unobservability, but extending these properties to articulated systems is nontrivial: inter-body pose coupling prevents a direct application, and incorporating joint kinematic constraints within the invariant framework remains an open problem. To address this gap, we introduce the relative L-extended pose, a Lie group representation for kinematic-tree systems. With one IMU per body, it yields group-affine dynamics and allows joint constraints to be expressed in invariant form. We incorporate these constraints as noise-free pseudo-measurements within an iterated IEKF (IterIEKF), thereby preserving the convergence and consistency guarantees of invariant filtering. Validated on both a UR5e robot and a human leg, the proposed IterIEKF outperforms all EKF, IterEKF, and absolute-pose IterIEKF baselines. It converges faster, exhibits lower run-to-run variability, and consistently achieves the lowest RMSE, with reductions of at least 50% compared to the second-best filter across all scenarios considered in this work.
Sven Goffin, Cédric Schwartz, Silvère Bonnabel +2