We introduce Paired-CSLiDAR (CSLiDAR), a cross-source aerial-ground LiDAR benchmark for single-scan pose refinement: refining a ground-scan pose within a 50 m-radius aerial crop. The benchmark contains 12,683 ground-aerial pairs across 6 evaluation sites and per-scan reference 6-DoF alignments for sub-meter root-mean-square error (RMSE) evaluation. Because aerial scans capture rooftops and canopy while ground scans capture facades and under-canopy, the two modalities share only a fraction of their geometry, primarily the terrain surface, causing standard registration methods and learned correspondence models to converge to metrically incorrect local minima. We propose Residual-Guided Stratified Registration (RGSR), a training-free, geometry-only refinement pipeline that exploits the shared ground plane through height-stratified ICP, reversed registration directions, and confidence-gated accept-if-better selection. RGSR achieves 86.0% S@0.75 m and 99.8% S@1.0 m on the primary benchmark of 9,012 scans, outperforming both the confidence-gated cascade at 83.7% and GeoTransformer at 76.3%. We validate RMSE-based pose selection with independent survey control and trajectory consistency, and show that added Fourier-Mellin BEV proposals can reduce RMSE while increasing actual pose error under extreme partial overlap. The dataset and code are being prepared for public release.
LiDAR place recognition determines one's position on a prior point cloud map. The most studied ground-level LiDAR place recognition suffers from pre-visit requirements, incomplete coverage, and limited perspectives. Using pre-acquired, full-coverage Airborne Laser Scanning (ALS) data as an aerial prior map overcomes these drawbacks, making cross-view place recognition necessary and advantageous. However, aerial-ground LiDAR place recognition faces significant challenges, including the domain gap between aerial and ground point clouds, and false positives during initial retrieval. To address these challenges, we present a novel retrieval and re-ranking framework for aerial-ground LiDAR place recognition. Based on the priors that neighboring point cloud patches share similar semantics with anchor patch, our retrieval network introduces patch-level self-supervised learning modules at multiple scales and integrates with scene-level learning to improve global feature discriminativeness between aerial and ground point clouds. Furthermore, leveraging the structured spatial distribution of ALS point clouds, we introduce an Expanded Reciprocal (ER) re-ranking algorithm to exploit neighborhood information maximally and refine each feature based on neighbor features, which are then used to update the similarity matrix for final ranking. Extensive experiments demonstrate that our retrieval network outperforms existing state-of-the-art (SOTA) methods, achieving a 9.8% improvement in average Recall@1 and a 3.2% improvement in average Recall@1% on the CS-Urban-Scenes, while also showing the best performance on the CS-Campus3D dataset. Additionally, our ER re-ranking algorithm further boosts the average Recall@1 by 4.9% on CS-Campus3D and 10.2% on CS-Urban-Scenes without additional training.
Image-to-Point Cloud Registration (I2P) is essential for integrating camera and LiDAR in perception and autonomous systems, yet the modality gap between images and point clouds makes it difficult to achieve both high accuracy and strong generalization. In this paper, we propose a simple yet effective I2P method that treats LiDAR as an imaging sensor: from a single sparse LiDAR scan, we generate a dense LiDAR intensity image using Conditional Rectified Flow, match it with a camera image using a pre-trained feature matcher, and estimate the 6-DoF relative pose via PnP-RANSAC. The proposed model is pre-trained through a self-supervised image completion task and fine-tuned on a small amount of LiDAR data (neither image-point cloud pairs nor ground-truth sensor poses are required), enabling it to scale to diverse LiDAR and camera configurations. Experiments on the R3LIVE dataset show that the proposed method achieves a mean error of 4.89° / 1.63 m, outperforming existing methods, while completing a single registration in approximately 0.68 s.
Unsupervised registration of large-scale LiDAR point clouds remains challenging due to the geometric ambiguity inherent in outdoor scenes, which degrades pseudo-label quality and leads to suboptimal convergence, particularly for sparse, low-resolution scans such as those from nuScenes. We reveal that registration models intrinsically encode semantic awareness that strongly correlates with registration accuracy, albeit without explicit semantic supervision. However, this native awareness is fragile: noisy supervision arising from geometric ambiguity in unsupervised settings rapidly erodes the learned semantic structure, causing performance collapse. To this end, we propose CAESAR, a teacher-student framework guided by an off-the-shelf 3D segmentation model exclusively during training. We observe that potential inlier matches are often buried just beneath a few spurious neighbors in the noisy feature space, motivating Dual-Cue Guided Re-Matching to recover them through reselection rather than simply rejecting. Building on this, a train-only Semantic-Geometric Label Mining performs lightweight, batch-specific teacher refinement and mines reliable pseudo-labels under semantic guidance. We further introduce Semantic Predictive Distillation to consolidate the student's semantic awareness in the feature space. Extensive experiments on KITTI and nuScenes demonstrate state-of-the-art performance, with pronounced gains on the challenging nuScenes benchmark. Crucially, CAESAR incurs zero inference overhead and requires no semantic annotations on the registration data. Code will be released.