Instructing robots from demonstrations can be done through different teaching modalities, each with different usability and performance trade-offs. This paper compares kinesthetic guidance, joystick teleoperation, and hand gestures in a user study with eight participants. We evaluate replay success, modified NASA-TLX workload, and common teaching errors across three manipulation tasks. Kinesthetic guidance produced the shortest demonstrations, lowest workload, and highest success on the more orientation-sensitive and contact-rich tasks. Joystick teleoperation performed best on simple peg picking. Hand-gesture teaching, although less reliable overall, performed better than expected and in some cases achieved results comparable to kinesthetic guidance.
Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.
Scalable collection of dexterous manipulation demonstrations remains a major bottleneck for robot learning. High-fidelity interfaces often require costly hardware and extensive setup, while low-setup, low cost alternatives tend to provide less precise control and impose greater cognitive workload on operators. We present DexDirect, a direct kinesthetic arm guidance for efficient dexterous demonstration collection. The operator drags a 6-DoF gravity-compensated robot arm directly by a handle, while a single webcam retargets operator's other hand onto a 16 joints 13-DoF dexterous robot hand. User studies suggest DexDirect collects 17.2x and 3.2x more successful demonstrations compared to purely vision (AnyTeleop) and pose-tracking (TeleDex) baselines. An adapted NASA-TLX shows DexDirect greatly reduces mental demand, effort, and frustration, despite raising physical demand. A diffusion policy trained on DexDirect demonstrations reaches a 90% success rate on a cube pick-and-place task. These results suggest that direct kinesthetic arm guidance combined with vision-based hand retargeting provides an efficient low-setup and scalable interface for collecting dexterous manipulation demonstrations
In robot teleoperation, haptic feedback can be used to help human operators accomplish dexterous manipulation tasks. However, existing haptic feedback methods try to replicate high-fidelity sensory haptics that are felt in real world interactions, which are constrained by the sensing and feedback hardware capability and may lead to higher workload. To addresses these limitations, this work introduces semantic haptics for teleoperation, which uses abstract haptic patterns to convey critical information about robot states. We categorize robot states into "Confirmations" and "Exceptions", implement a modular haptic rendering pipeline in robot simulation, and deliver semantic haptic feedback to operators through pneumatic and vibrotactile wristbands. This simplifies hardware requirements and enables one-to-many mappings between haptic patterns and robot states. Through three evaluation studies, we identify the most effective semantic haptic design for a common pick and place teleoperation task and compare semantic haptics to other teleoperation feedback approaches including sensory haptics and visual feedback. Results suggest that while semantic haptics performs similarly as other feedback in unimanual tasks, it achieves superior performance in bimanual tasks, with reduced task workload, increased situational awareness, and overall preference.