Robotics manipulation usually assumes that the shape and pose of the object are known to the robot prior to motion planning. However, precise geometric information is not always available in practice, and pose inference suffers from sensor uncertainties and view occlusion. In this work, we propose a unified model-based geometric framework integrating robotic haptic perception, modeling, and manipulation planning. Our novelties involve: \textit{i)} Introducing Bayesian Optimization (BO) to guide the haptic exploration for object shape inference, where superellipses are used to approximate geometric boundary; \textit{ii)} Adaptive formulation of manipulation potential encoding object geometry for quasi-static robot-object interaction; \textit{iii)} Proposing an online Ordinary Differential Equation (ODE) for real-time pose inference based on model prediction and tactile feedback. We deploy our system on a 2D robotic sorting task, and vary object geometries to validate the robustness and generalizability of our framework in both simulation and a real-world multi-arm setup.
Contact-rich manipulation requires pose estimates that are often more accurate than what depth-only sensing provides. Existing methods, relying on vision and contact, employ costly offline training procedures that need to be retrained for new environments and geometries. We propose BayesContact, a Simulation-Based Inference framework for visuo-tactile pose estimation in peg-in-hole insertion. BayesContact maintains a particle belief over object pose and fuses depth observations with force/torque-derived contact evidence. We employ simulation based forward models to approximate these observation likelihoods. For each pose hypothesis, a renderer predicts depth measurements and a physics simulator predicts contact outcomes under guarded probing actions; both are scored against real observations to update the belief. The resulting multimodal belief also enables information-gain-based probing for active disambiguation. Across simulated geometries and real-robot experiments, BayesContact improves pose observability and insertion success over vision-only inference by 30%
Accurate 6-DoF object pose estimation is fundamental to robotic manipulation, yet vision-based methods often fail under occlusion, poor lighting, and reflective or transparent surfaces. We present YOTO, a tactile-only pose estimation system that recovers the full 6-DoF object pose from a single pair of simultaneous contacts, without requiring contact history. YOTO represents each tactile contact as a local 3D point cloud and localizes it on the object surface through a coarse-to-fine network. The two localized contacts, together with the calibrated sensor poses, are then fed to a closed-form normal-aware SVD solver that recovers the full 6-DoF object pose in one step. To reduce real-data requirements, the localization network is pretrained on virtual tactile patches sampled from the object model and fine-tuned with a small number of real contacts. We further show that YOTO can operate on object models reconstructed from consumer-grade mobile scans, and quantify the gap relative to CAD-based models. Experiments on four geometrically diverse objects demonstrate accurate tactile contact localization and pose estimation, outperforming vision-based and geometric baselines, especially when visual perception is unreliable. Code, trained models, and the real GelSight dataset will be released upon publication.
Humans grasp unfamiliar objects by combining an initial visual estimate with tactile and proprioceptive feedback during interaction. We present ShapeGrasp, a robotic implementation of this approach. The proposed method is an iterative grasp-and-complete pipeline that couples implicit surface visuo-haptic shape completion (creation of full 3D shape from partial information) with physics-based grasp planning. From a single RGB-D view, ShapeGrasp infers a complete shape (point cloud or triangular mesh), generates candidate grasps via rigid-body simulation, and executes the best feasible grasp. Each grasp attempt yields additional geometric constraints -- tactile surface contacts and space occupied by the gripper body -- which are fused to update the object shape. Failures trigger pose re-estimation and regrasping using the refined shape. We evaluate ShapeGrasp in the real world using two different robots and grippers. To the best of our knowledge, this is the first approach that updates shape representations following a real-world grasp. We achieved superior results over baselines for both grippers (grasp success rate of 84% with a three-finger gripper and 91% with a two-finger gripper), while improving the 3D shape reconstruction quality in all evaluation metrics used.