UAV multispectral imagery naturally contains multi-angular observations due to low flight altitude and wide field-of-view imaging, which may introduce geometry-driven radiometric variability. This study proposes a geometry-aware multi-angular observation extraction workflow to quantify observation-geometry effects from a BRDF perspective. Specifically, camera intrinsics and extrinsics are refined via structure-from-motion (SFM), and homogeneous regions annotated on an orthomosaic are reprojected onto multiple raw sub-images acquired from different viewpoints. This enables joint extraction of multi-band reflectance and observation geometry parameters for the same ground targets under varying viewing directions. The extracted observations are further analyzed using band-wise polar visualization in the (VZA, RAA) domain. Results on a grassland target show clear reflectance anisotropy across ten bands, with red-edge and nearinfrared bands exhibiting 119-137% variability between maximum and minimum reflectance, indicating non-negligible observation-geometry effects on radiometric consistency.
Feed-forward 3D reconstruction has advanced rapidly, but current models remain unreliable in UAV photogrammetric acquisition. We argue that this failure is caused not only by appearance-domain shift, but also by UAV-specific camera-geometry variations, especially oblique views and HFOV-height ambiguity. Existing UAV datasets mainly emphasize scene diversity and provide limited coverage of camera configurations, which restricts robustness evaluation and UAV-domain adaptation. To address this gap, we introduce UAVFF3D, a geometry-aware real-synthetic benchmark for feed-forward UAV 3D reconstruction. UAVFF3D contains more than 170k real UAV images and more than 370k synthetic images rendered from high-quality textured 3D models, covering diverse HFOVs, flight altitudes, viewing directions, and acquisition patterns. It also includes a controlled HFOV-height test subset for diagnosing projection-geometry ambiguity. We further propose an evaluation protocol that jointly assesses camera-geometry estimation and dense scene reconstruction under a shared global alignment, avoiding the bias caused by separate camera and geometry alignments. Experiments on representative feed-forward reconstruction models show that UAVFF3D-based domain adaptation consistently improves camera and geometry estimation, reducing Ray Error by up to 84.2%, Pose ATE by up to 76.0%, and Chamfer Distance by up to 41.1%. In oblique scenes, adaptation reduces the oblique-nadir rotation gap by up to 90.7%. Under HFOV-height ambiguity, it improves robustness across HFOV-height configurations and yields more stable performance across HFOV settings. Incorporating camera priors further improves reconstruction under UAV-specific acquisition geometries. The dataset and evaluation code are available at https://github.com/yanxian-ll/UAVFF3D .
Unmanned aerial vehicle facade inspection can combine red, green, and blue (RGB) imagery with thermal measurements to screen surface and subsurface anomalies. However, geometric discrepancies between the sensors and thermal image rendering can obscure spatial correspondence and weak temperature contrasts. This article presents a sensor-level pipeline comprising per-sensor correction, RGB-to-thermal registration, common-support cropping, and signed local contrast encoding of 16-bit radiometric measurements. The encoding preserves the distinction between locally hotter and colder regions and supplies the fourth input channel of a compact single-stream detector. We introduce M3T, a dataset of 674 paired RGB and radiometric thermal samples from five facade-inspection projects covering eight component and anomaly categories. The median residual registration error is 3.384 pixels, and a controlled-displacement analysis characterizes how the local contrast response changes under controlled displacement. Project-grouped four-fold evaluation yields mean average precision of 0.168 over intersection-over-union thresholds from 0.5 to 0.95, using 28.50 billion floating-point operations per image. A separate single-split ablation shows improved delamination detection over RGB-only and alternative thermal inputs, although aggregate accuracy does not improve over RGB alone. Evaluation on RGBT-Tiny shows mixed performance with rendered thermal imagery. These results characterize the category-specific benefits and limitations of aligned radiometric contrast for compact facade screening.
Unmanned Aerial Vehicle (UAV) multispectral point clouds (MPC) provide high-dimensional spatial-spectral data for sub-canopy target detection; however, their efficacy is significantly compromised by severe illumination heterogeneity caused by vegetation shadows. To address this, we propose a prior-free anomaly detection framework capable of robustly handling lighting variations. First, we formulate solar angle estimation as an inverse optimization problem. By coupling spectral indices with a ray-tracing model, this strategy achieves Prior-Free Shadow Extraction without relying on flight metadata, effectively distinguishing dark objects from true shadows. Second, to mitigate spectral distortions, we introduce an Illumination-Consistent Sparse Representation mechanism. Unlike standard reconstruction methods, we construct a background dictionary strictly from neighbors sharing the same illumination state. This constraint effectively disentangles spectral reflectance from lighting variations, ensuring that targets are represented solely by physically consistent background points. Experimental results indicate that the proposed method significantly improves the separability between anomalies and background in complex forest environments, demonstrating superior performance over state-of-the-art baselines. This framework is particularly suited for identifying camouflaged military targets, mapping fallen tree trunks, and uncovering archaeological ruins hidden beneath dense foliage.