Planar-Sector LOS Guidance for Interception of Agile Targets with Lifting-Wing Quadcopters
Authors: Linkai Liu, Kun Yang, Han Zou, Chen Min, Shuli Lv, Shuai Wang, Quan Quan
Abstract
Autonomous visual interception of agile aerial targets is challenging due to unpredictable target motion, limited sensing, and the strong coupling between target visibility and interceptor maneuverability. Most existing strapdown-camera interception methods preserve visibility using conic line-of-sight (LOS) constraints that keep the target near the image center. While safe, such symmetric constraints unnecessarily restrict maneuverability and can significantly reduce the usable thrust for pursuit. Motivated by the observation that aggressive FPV pilots do not maintain equal visibility margins in all image directions, this paper proposes a Planar-Sector Line-of-Sight (PS-LOS) guidance framework for autonomous interception using a lifting-wing quadcopter equipped with only a strapdown monocular camera. PS-LOS tightly constrains lateral image error while relaxing longitudinal image error within a safe field-of-view margin, preserving visibility while releasing maneuverability for acceleration-intensive pursuit. Under the lifting-wing quadcopter model, PS-LOS provides nearly 50% more available thrust near the LOS direction than conventional conic LOS constraints. To realize LOS-only interception without direct depth measurements, a delay-compensated state-estimation framework and a nonlinear guidance-and-control architecture are developed for lifting-wing quadcopters. Extensive outdoor flight experiments demonstrate autonomous interception of agile targets exhibiting large-amplitude, high-frequency, and unpredictable motion under real wind disturbances. The proposed system achieves successful interceptions at ranges up to 138 m while maintaining continuous visual tracking throughout the engagement. The results validate PS-LOS as a visibility-preserving, maneuverability-aware guidance framework for long-range visual interception of agile aerial targets.
This paper presents a methodology for learning a control policy to intercept an intruder using the 3D direction unit vector to the intruder and the interceptor state. Prior deep reinforcement learning approaches assume either relative position or distance to the intruder is available, but this information is not readily accessible in real-world applications that employ passive, monocular camera sensors. Instead, we propose a solution that leverages an analytical policy gradient method using differentiable quadrotor dynamics to learn agile interception at speeds up to 10 m/s. The proposed approach outperforms baseline methods that utilize simplified point mass dynamics by an average of 30%.
This study introduces a unified control framework for fixed-wing unmanned aerial vehicles (UAVs) fitted with a pan-tilt (PT) camera, intended to perform an end-to-end mission spanning from initial target detection to accurate terminal engagement. The proposed system employs a three-phase strategy: a vision-based target acquisition phase, an NMPC-based tracking phase, and a terminal guidance phase. During tracking, the framework uses an Unscented Kalman Filter (UKF) to fuse YOLO-based visual detections with inertial measurements, enabling robust target state estimation under unknown dynamics. To ensure reliable visual contact, we introduce a constraint-aware Nonlinear Model Predictive Control (NMPC) strategy that incorporates Control Barrier Functions (CBFs) to explicitly prevent UAV self-occlusion -- a common limitation in fixed-wing tracking. Upon satisfying terminal engagement conditions, the system seamlessly transitions control to a quaternion-based Biased Proportional Navigation Guidance (BPNG) law, enforcing precise impact angle constraints. High-fidelity simulations demonstrate that the framework achieves stable, robust tracking and accurate terminal interception while strictly respecting the vehicle's dynamic limits and camera field-of-view constraints.
Autonomous aerial scanning of target structures is crucial for practical applications, requiring online adaptation to unknown obstacles during flight. Existing methods largely emphasize collision avoidance and efficiency, but overlook occlusion-induced visibility degradation, severely compromising scanning quality. This study proposes FC-Vision, an on-the-fly visibility-aware replanning framework that proactively and safely prevents target occlusions while preserving full target coverage and efficiency of the original plan. Our approach explicitly enforces dense surface-visibility constraints to regularize replanning behavior in real-time via an efficient two-level decomposition: occlusion-free viewpoint repair that maintains coverage with minimal deviation from the nominal scan, followed by segment-wise clean-sensing connection in 5-DoF space. A plug-in integration strategy is also presented to seamlessly interface \textbf{FC-Vision} with existing UAV scanning systems without architectural changes. Comprehensive simulation and real-world evaluations show that \textbf{FC-Vision} consistently improves scanning quality under unexpected occluders, delivering a maximum coverage gain of 55.32% and a 73.17% reduction in the occlusion ratio, while achieving real-time performance with a moderate increase in flight time. The code has been released at https://github.com/FC-Family/FC-Vision.