Measurement-Calibrated Multi-Camera Fusion for Vision-Based Indoor Localization

Visual Floorplan Localization (FLoc) has emerged as a promising solution for indoor localization by matching egocentric images against minimalist structural maps. However, due to cross-modal information asymmetry and repetitive indoor layouts, visual FLoc is fundamentally challenged by multimodal pose distributions, where visually identical observations map to distinct, spatially separated locations. Existing ray-matching-based methods tackle this by explicitly predicting sparse geometric or semantic rays, which inherently incur information loss and demand resource-intensive preprocessing alongside exhaustive matching during inference. In this paper, we bypass the intermediate ray-matching paradigm and propose a coarse-to-fine visual FLoc framework that progresses from uncertainty to determinism. In the coarse stage, we design an image-conditioned pose diffusion model to parameterize the continuous multimodal pose distribution, effectively routing stochastically initialized pose particles toward distinct candidate modes. In the refinement stage, we propose a localized refiner that predicts bounded sub-meter pose residuals from candidate-centered floorplan crops, where structural ambiguities are largely eliminated. Our method effectively balances global multi-hypothesis tracking and local sub-meter refinement without requiring any offline map preprocessing or test-time lookup tables. Comprehensive results on the S3D (full) and ZInD benchmarks demonstrate that our approach achieves state-of-the-art accuracy and robustness.

Visual-inertial odometry (VIO) is widely used for mobile robot localization, but its long-term accuracy degrades without global constraints. Incorporating ranging sensors such as ultra-wideband (UWB) can mitigate drift; however, high-accuracy ranging usually requires well-deployed anchors, which is difficult to ensure in narrow or low-power environments. Moreover, most existing visual-inertial-ranging (VIR) fusion methods rely on discrete time-based filtering or optimization, making it difficult to balance positioning accuracy, trajectory consistency, and fusion efficiency under asynchronous multi-sensor sampling. To address these issues, we propose a spline-based continuous-time state estimation method for VIR fusion localization. In the preprocessing stage, VIO motion priors and UWB ranging measurements are used to construct virtual anchors and reject outliers, thereby alleviating geometric degeneration and improving range reliability. In the estimation stage, the pose trajectory is parameterized in continuous time using a B-spline, while inertial, visual, and ranging constraints are formulated as factors in a sliding-window graph. The spline control points, together with a small set of auxiliary parameters, are then jointly optimized to obtain a continuous-time trajectory estimate. Evaluations on public datasets and real-world experiments demonstrate the effectiveness and practical potential of the proposed approach.

Accurate localization of unmanned aerial vehicles (UAVs) is essential for applications such as structural health monitoring, especially in environments where Global Positioning System (GPS) signals are denied or unreliable, like indoor spaces, tunnels, urban canyons, or areas beneath large structures. To address this challenge, we propose Cross-Fusion, a novel method for real-time UAV localization that integrates data from a 3D Light Detection and Ranging (LiDAR) and a monocular camera. A key contribution is its cross-session fusion strategy, which integrates visual and geometric information collected from multiple agents during routine baseline surveys to improve localization consistency and map completeness. The system employs LiDAR-based odometry for motion tracking and image-based feature matching via a single red-green-blue (RGB) camera to correct drift and improve accuracy. Unlike visual-inertial systems, Cross-Fusion maintains a simple sensor setup and avoids the complexity of stereo or global shutter configurations. Experimental results demonstrate that Cross-Fusion achieves localization accuracy comparable to GPS-based methods and performs reliably in challenging feature-sparse environments.