DexLink Hand: A Compact, Affordable, 16-DOF Linkage-Driven Hand with Human-Like Dexterity

Designing anthropomorphic robotic hands that balance functional dexterity with mechanical simplicity remains a significant challenge. Inspired by human hand synergies, this paper presents the SyLink Hand, an anthropomorphic dexterous hand that integrates biomechanical synergy principles with linkage-driven transmission mechanisms to achieve a high degree of anthropomorphism in appearance, kinematics, and functionality within a compact and cost-effective architecture. Biomechanical analysis of natural hand motions using motion capture gloves reveals strong kinematic correlations among hand joints, providing the basis for a simplified yet functional degree-of-freedom (DOF) configuration. Guided by these synergistic characteristics, optimized linkage mechanisms are employed to coordinate multiple joint motions and reproduce natural finger trajectories. A novel spherical four-bar linkage is further proposed to achieve decoupled flexion/extension (Flex/Ext) and abduction/adduction (Abd/Add) at the metacarpophalangeal joint within a compact form factor. The resulting prototype integrates 19 joints driven by 11 actuators, with a total mass of 520g and a manufacturing cost of approximately USD 400. Experimental evaluations demonstrate its human-like kinematic performance, high load-bearing capability, and versatile grasping and manipulation skills. These results validate that the synergy-inspired, linkage-based design effectively balances anthropomorphism, mechanical simplicity, and functional versatility, highlighting its potential for practical deployment in dexterity-demanding robotic applications.

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com

High-DOF dexterous hands require compact actuation, rich sensing, and reliable thermal behavior, but conventional designs often occupy valuable in-hand space, increase end-effector mass, and suffer from heat accumulation near the hand. Remote tendon-driven actuation offers an alternative by relocating motors to the robot base or an external motor hub, thereby freeing the fingers and palm for additional degrees of freedom, sensing modules, and maintainable mechanical structures. This paper presents MM-Hand, a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation. The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system including joint angle sensors, tactile sensors, motor-side feedback, and in-palm stereo vision. We further analyze tendon-sheath length variation and friction loss to guide the design of the routing, motor hub, and closed-loop joint control. Experiments validate the transmission, output force, sensing, and control capability of the system. The fingertip force reaches 25N under a 1m remote sheath transmission, demonstrating practical load capacity despite long-distance tendon routing. Closed-loop joint-level experiments further evaluate command tracking with a static arm and during arm motion. These results show that MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research. To support the community, all hardware designs and software frameworks are made fully open-source at https://mmlab.hk/research/MM-Hand.