The problem of autonomous navigation for UAV inspection remains challenging as it requires effectively navigating in close proximity to obstacles, while accounting for dynamic risk factors such as weather conditions, communication reliability, and battery autonomy. This paper introduces the MOAR path planner which addresses the complexities of evolving risks during missions. It offers real-time trajectory adaptation while concurrently optimizing safety, time, and energy. The planner employs a risk-aware cost function that integrates pre-computed cost maps, the new concepts of damage and insertion costs, and an adaptive speed planning framework. With that, the optimal path is searched in a graph using a discrete representation of the state and action spaces. The method is evaluated through simulations and real-world flight tests. The results show the capability to generate real-time trajectories spanning a broad range of evaluation metrics: around 90% of the range occupied by popular algorithms. The proposed framework contributes by enabling UAVs to navigate more autonomously and reliably in critical missions.
Uncrewed aerial vehicles (UAVs) are increasingly used for exploration-driven monitoring in hazardous environments such as disaster zones, contaminated sites, wildfire areas, and damaged infrastructure, where limited flight endurance must be allocated between visiting reported locations and gathering new information. In these settings, prior information regarding hazards is often incomplete, spatially imprecise, and subject to change during execution. For example, initial reports may identify a region where a hazard is likely to exist, but the actual hazard may be displaced, partially observed, or entirely unreported. We present an integrated exploration-aware UAV route optimization and path planning framework for hazard monitoring under uncertain and evolving prior information. The environment is represented as a spatial risk map, where each location has an associated belief of hazardous conditions. Reported hazards are modeled as uncertain regions of interest (ROIs) rather than confirmed target locations, requiring the UAV to inspect reported areas while also using its limited flight endurance to explore informative regions. The proposed method solves a vehicle routing problem over reported ROIs, augments the route with auxiliary pseudo-nodes to improve spatial coverage, allocates the remaining flight distance budget across route segments, and optimizes dynamically feasible B-spline trajectories for local exploration. During execution, UAV measurements update a grid-based belief map, and the remaining trajectory is replanned when new information and the remaining budget justify adaptation. Across 48 scenario configurations, online replanning improves average KL reduction by 15.9% over the offline optimized planner and 48.6% over straight-line traversal.
Deep reinforcement learning (DRL) finds extensive application in autonomous drone navigation within complex, high-risk environments. However, its practical deployment faces a safety-exploration dilemma: soft penalty mechanisms encourage risky trial-and-error, while most constraint-based methods suffer degraded performance under sensor noise and intent uncertainty. We propose Dynamic-TD3, a physically enhanced framework that enforces strict safety constraints while maintaining maneuverability by modeling navigation as a Constrained Markov Decision Process (CMDP). This framework integrates an Adaptive Trajectory Relational Evolution Mechanism (ATREM) to capture long-range intentions and employs a Physically Aware Gated Kalman Filter (PAG-KF) to mitigate non-stationary observation noise. The resulting state representation drives a dual-criterion policy that balances mission efficiency against hard safety constraints via Lagrangian relaxation. In experiments with aggressive dynamic threats, this approach demonstrates superior collision avoidance performance, reduced energy consumption, and smoother flight trajectories.
We address the problem of reactive motion planning for quadrotors operating in unknown environments with dynamic obstacles. Our approach leverages a 4-dimensional spatio-temporal planner, integrated with vision-based Safe Flight Corridor (SFC) generation and trajectory optimization. Unlike prior methods that rely on map fusion, our framework is mapless, enabling collision avoidance directly from perception while reducing computational overhead. Dynamic obstacles are detected and tracked using a vision-based object segmentation and tracking pipeline, allowing robust classification of static versus dynamic elements in the scene. To further enhance robustness, we introduce a backup planning module that reactively avoids dynamic obstacles when no direct path to the goal is available, mitigating the risk of collisions during deadlock situations. We validate our method extensively in both simulation and real-world hardware experiments, and benchmark it against state-of-the-art approaches, showing significant advantages for reactive UAV navigation in dynamic, unknown environments.
Astik Srivastava, Thomas J Chackenkulam, Bitla Bhanu Teja +2