Soft Robotic Exogloves for Dexterous Mobility -- Towards Personalized Rehabilitation

Hand spasticity and resulting pain affect 12 million people worldwide, including stroke survivors, arthritis patients, and those with other muscle and nerve deficiencies. Soft robotic exogloves are being introduced to help patients enhance mobility or manage pain; however, there are no current solutions that address both pain and mobility. We present preliminary development of a soft robotic exoglove that both aids in mobility and administers massage-like compression to relax spastic muscles. The glove consists of soft pneumatic actuators that are personalized to an individual's hand topology and kinematics, allowing for optimal conformability and targeted mobility. Novel soft actuators were designed, analyzed, fabricated, assembled into an exoglove, and experimentally tested. Actuators were 3D modeled and analyzed with finite element modeling under pressures of 100 and 200 kPa. Geometries were optimized to minimize stress before fabrication and testing. A dorsal finger actuator was successfully customized to a participant's hand topology, providing full conformal contact and maximal force distribution. A ventral finger actuator was successfully fabricated that can be drastically compressed in size to fit into the tight space of a hyperflexed spastic finger. A palmar actuator was successfully printed with stereolithography, showing potential for 3D-printed soft actuators with more complex geometries. The glove was assembled and successfully worn by a pilot user to validate initial findings in comfort and effectiveness.

The passive adaptability inherent in soft robotic hands affords them advantages in applications that require safe and compliant interaction. However, existing soft robotic hands often struggle to simultaneously achieve adequate output performance and easy manufacturing due to their complicated structures. In this paper, we introduce the asymmetric origami bending (AOB) pattern for generating bending motion and the asymmetric dual-chamber (ADC) design for obtaining multifunction capability. The AOB single (AOB-S) chamber and AOB dual-chamber (AOB-D) units are designed and constitute the finger and palm actuators of the proposed Origami-inspired SOft Robotic (OSOR) hand. The OSOR hand achieves bio-inspired fingers-palm motions and adequate output performance within a monolithic structure that significantly simplifies the manufacturing process. By defining the asymmetric ratio to characterize the geometric asymmetry of the unit, the analytical models of the AOB and ADC structures are proposed. The Finite Element Analysis tool for the design of AOB actuators is obtained by geometric analysis. The asymmetric origami design grants the integrated manufacturing of the OSOR hand through a Selective Laser Sintering printing process with a single thermoplastic polyurethane material. The model and simulations are validated by experimental results. Experiments show the finger and palm maximum bending motion range of 203° and 40°, respectively, with output forces of 6.3 N and 16 N. The OSOR hand is capable of pinching a piece of tissue, stably grasping water bottles with two fingers, palm-only grasping, and completing the power grasps in the taxonomy of manufacturing grasps. The compactness, performance, and easy manufacturing of the proposed hand benefit the development of the soft robotic hand with new possibilities.

We present ART-Glove, an articulated tactile glove designed to capture contact-grounded dexterous demonstrations while preserving human dexterity. ART-Glove makes hand-side contact geometry explicit with 16 rigid functional surfaces covering the fingers, thumb, and palm. Twenty-two anatomically aligned joints connect these surfaces and allow them to follow human hand motion during dexterous manipulation. Encoder-based sensing tracks surface motion, while dense piezoresistive tactile sensing records contact over the same surfaces. The complete system captures synchronized 22-DoF joint measurements and 2048-taxel tactile measurements at 120 Hz. We evaluate ART-Glove across experiments on motion freedom, joint sensing, tactile sensing, and contact-rich interaction capture, demonstrating its ability to preserve human dexterity while recording contact-grounded information that can support downstream dexterous robot learning.