Finite-Time Curvature-Constrained Vector Field for Saturation-Free Motion Planning of Nonholonomic Robots
Authors: Zhouru Xiao, Sha Luo, Yang Lu, Héctor García de Marina, Zhenyang Xu, Chaosong Gong, Yaonan Wang, Weijia Yao
Abstract
Accurately steering a robot to a target configuration is fundamental in engineering, yet remains challenging for nonholonomic mobile robots. Vector fields (VFs) provide a natural framework by specifying desired motion directions throughout the workspace and enabling direct integration with feedback control. However, most existing VF-based methods cannot explicitly generate trajectories satisfying curvature constraints. Actuator limits are therefore often enforced by input saturation, which may invalidate stability guarantees and degrade closed-loop performance when not considered in controller design. In addition, these methods usually ensure only asymptotic convergence without an explicit settling-time bound. To address these issues, we propose a generalized motion planning and control framework consisting of a finite-time curvature-constrained vector field (FT-C2VF) and a saturation-free control law. Depending on the motion objective, the framework drives the robot to the target configuration in finite time or through it periodically. First, the FT-C2VF is constructed using complementary gains to achieve finite-time convergence while ensuring that the curvature of its integral curves is continuous, bounded, and monotonically decreasing with the radial ratio. Second, an almost globally C1-smooth, saturation-free controller is developed to track the FT-C2VF without Jacobian information, while keeping all control inputs within prescribed actuator limits. Third, dynamical-systems analysis establishes almost-global finite-time stability of the target equilibrium. Numerical simulations show improved performance over representative VF-based methods, and outdoor experiments on an Ackermann-steered vehicle confirm the effectiveness and robustness of the proposed approach.
Trajectory curvature constraints are inherent in practical multi-robot systems due to the limited turning capabilities of the robots. Without properly accounting for these constraints, robots may fail to accomplish assigned tasks, and their trajectories may diverge from the intended paths. This paper proposes a distributed safe cooperative vector field approach for multi-robot systems subject to trajectory curvature constraints. The proposed approach is composed of a cooperative vector field and a safety-oriented collision avoidance vector field, aiming to address the problems of cooperative motion and safe collision avoidance in multi-robot path-following tasks. A safety-oriented collision avoidance vector field with adaptively adjustable reactive boundary is developed to accommodate the kinematic curvature constraints of robots, thereby ensuring the physical feasibility of collision avoidance maneuvers. The proposed vector field requires only a single virtual variable from each neighboring robot to achieve cooperative motion and ensure both obstacle avoidance and inter-robot collision avoidance. The effectiveness of the proposed approach is validated through both simulations and real-world experiments on an actual multi-robot platform.
This paper presents a framework for safe navigation of a unicycle point robot to a goal position in an environment populated with obstacles from almost any admissible state, considering input limits. We introduce a novel QP formulation to create a Cinfinity-smooth vector field with reduced total bending and total turning. Then we design an analytic, non-linear feedback controller that inherently satisfies the conditions of Nagumo's theorem, ensuring forward invariance of the safe set without requiring any online optimization. We have demonstrated that our controller, even under hard input limits, safely converges to the goal position. Simulations confirm the effectiveness of the proposed framework, resulting in a twice faster arrival time with over 50% lower angular control effort compared to the baseline.
Safe navigation in dynamic environments is challenging when system dynamics are unknown and actuator inputs are limited. Existing methods either rely on accurate models, require online optimization, or do not explicitly account for input constraints. This paper presents a real-time control framework for unknown Euler-Lagrange systems that guarantees finite-time reach-avoid-stay (FT-RAS) specifications while respecting actuator limits. We extend the spatiotemporal tube (STT) framework by incorporating input constraints into the controller design and derive offline-verifiable feasibility conditions that relate the available control authority to the tube design and uncertainty bounds. The resulting framework is approximation-free and computationally efficient, making it suitable for real-time implementation. The proposed approach is validated through simulations on a mobile robot, a quadrotor, and a spacecraft, together with hardware experiments on a mobile robot, demonstrating safe navigation while satisfying actuator constraints.