Accurate extrinsic rotation calibration between sensors is fundamental to the performance of robotic perception systems. However, most existing calibration techniques rely on full 6-DoF motion to excite all degrees of freedom, which is often infeasible for ground-constrained robots with limited motion capabilities. Recent approaches designed for such restricted settings, such as Canonical Correlation Analysis (CCA)-based methods, suffer from ill-conditioned covariance matrices that lead to numerical instability and suboptimal calibration accuracy. To overcome these limitations, we present a novel rotation calibration framework named PLS-Calib that, for the first time, leverages Partial Least Squares (PLS) regression to model the latent kinematic correlations between asynchronous, heterogeneous sensor streams. Specifically, we apply our method to the calibration of an event camera and an odometry onboard a ground robot. To improve event-based pattern detection, we introduce a polarity-aware event representation, which enhances spatiotemporal contrast in circular calibration targets. Our PLS-based formulation yields a closed-form, stable solution that avoids matrix singularities inherent in CCA-based approaches. Extensive experiments on both synthetic and real-world datasets validate the effectiveness of our approach, demonstrating significant improvements in calibration robustness and accuracy over state-of-the-art methods. This work offers a practical and theoretically grounded solution for rotation calibration in constrained robotic systems and opens up new directions for applying statistical learning techniques in neuromorphic vision.
Extrinsic calibration of multi-camera systems with non-overlapping FOVs has been a challenging problem in the robotics literature. Conventional target-based methods impose substantial target setup overhead, either deploying large calibration targets or requiring pre-measured multi-target poses. Motion-based approaches instead suffer from drift error, scale ambiguity, and motion degeneracy. Securing both accuracy and usability, we propose a novel calibration method that leverages pure rotational motion, requiring only a single static calibration board. The key idea is to make all cameras sequentially observe the same target under a shared geometric reference, even without overlapping views. To integrate these time-separated observations, we formulate the problem using a latent turntable frame and a 3D error on SE(3) within a global optimization framework. We validate the proposed method on both a controlled camera rig and a full-scale vehicle platform with heterogeneous cameras, and analyze robustness under non-ideal turntable motion. Extensive experiments show that our approach maintains competitive accuracy without specialized precision hardware, proving its strong suitability for realistic on-site deployments. Our code is publicly available here.
Target-based LiDAR-camera extrinsic calibration is a prerequisite for multi-sensor fusion in robotics. However, in the widely adopted four-hole pipeline, calibration accuracy is bottlenecked by LiDAR-side hole-center extraction, which suffers from sparse angular coverage and mixed-pixel corruption. This paper presents P2Calib, which exploits pattern priors, geometric constraints specified by the CAD model of the target board, to improve calibration accuracy. First, we incorporate the known hole radius as a fitting constraint to prevent center estimates from degrading under sparse angular coverage. Building on the improved hole estimates, we further enforce the rigid rectangular layout of the four holes as a global consistency constraint to correct residual errors across holes. Both priors are integrated into an interactive calibration tool that provides a complete extrinsic calibration pipeline. Experiments on simulated and real datasets show that P2Calib lowers the joint registration residual by 90% and 82% and the held-out reprojection error by 96% and 77% over the baseline. Code, https://github.com/JokerJohn/P2Calib.git, and data will be released to facilitate future research.
Accurate camera-LiDAR calibration is a prerequisite for robust multi-modal perception in robotics. Recent target-less approaches based on deep point correspondences achieve remarkable performance for extrinsic calibration but assume rectified images with known intrinsics. In this work, we overcome this limitation and present the first fully target-less pipeline that jointly estimates camera intrinsics (pinhole model with radial-tangential distortion) and camera-LiDAR extrinsics with deep pixel-point correspondences. Our approach extends deep correspondence-based calibration by (i) automatic intrinsic initialization via structure-from-motion, (ii) generalizing camera-LiDAR matching to raw images with unknown intrinsics including distortion, and (iii) tightly coupling correspondence estimation with joint nonlinear optimization over both intrinsics and extrinsics. We evaluate our method on the KITTI dataset with unseen camera-LiDAR pairs and demonstrate that joint calibration achieves improved extrinsic accuracy while additionally recovering accurate intrinsics.