Energy feasibility under wind uncertainty is a critical safety issue for low-altitude air-ground delivery. In truck-UAV systems, UAVs complete assigned deliveries and safely return to a mobile truck or depot, while wind-induced propulsion costs vary online and are only partially observable. Existing routing methods often rely on static or deterministic energy models, which may underestimate headwind, crosswind, battery-voltage, and return-feasibility risks. This paper proposes Energy-Aware Wind-Resilient Routing (EWR), an online risk-sensitive planning framework for wind-aware and energy-safe UAV routing. The delivery environment is represented as a time-dependent directed energy graph whose edge costs are updated using delayed noisy wind estimates, payload states, and conservative uncertainty margins. Experiments using synthetic delivery graphs with replayed wind logs from a public truck-UAV delivery dataset show that EWR improves mission success rates and reduces wind-induced return failures.
Limited flight endurance significantly restricts the operational range of unmanned aerial vehicles (UAVs) in long duration missions such as surveillance and inspection, where multiple spatially distributed Areas of Interest (AOIs) must be visited. These tasks require efficient routing determining the sequence of visits which directly impacts mission time, energy consumption, and overall feasibility. Pairing UAVs with unmanned ground vehicles (UGVs) for mobile recharging offers a promising solution, but introduces a tightly coupled cooperative routing problem involving UAV route planning, UGV road constrained movement, energy management, and rendezvous scheduling under uncertainty. In this work, we present an integrated planning and autonomy framework for reliable field deployment. We formulate the problem as an energy constrained cooperative routing task and solve it using a Deep Reinforcement Learning (DRL) based planner that jointly optimizes the UAV visitation sequence and rendezvous locations with the UGV, outperforming baseline heuristics in minimizing total mission time. To bridge the gap between planning and execution, we introduce a standardized two layer YAML based mission API that captures environment states and structures lightweight, synchronized action sequences. This framework is supported by a complete autonomy stack using PX4/MAVSDK for UAV control and ROS 2/Nav2 for UGV navigation. Furthermore, we propose a lightweight Rendezvous Aware Replanner (RARP) that operates online to handle environmental uncertainties, reducing energy margin violations from 83.33% to 20.00%. The full system is validated through outdoor field experiments, demonstrating robust cooperative navigation and adaptability in dynamic tasks, including a search and rescue scenario with vision language model (VLM) based hazard detection
Uncrewed aerial vehicles (UAVs) are increasingly used for exploration-driven monitoring in hazardous environments such as disaster zones, contaminated sites, wildfire areas, and damaged infrastructure, where limited flight endurance must be allocated between visiting reported locations and gathering new information. In these settings, prior information regarding hazards is often incomplete, spatially imprecise, and subject to change during execution. For example, initial reports may identify a region where a hazard is likely to exist, but the actual hazard may be displaced, partially observed, or entirely unreported. We present an integrated exploration-aware UAV route optimization and path planning framework for hazard monitoring under uncertain and evolving prior information. The environment is represented as a spatial risk map, where each location has an associated belief of hazardous conditions. Reported hazards are modeled as uncertain regions of interest (ROIs) rather than confirmed target locations, requiring the UAV to inspect reported areas while also using its limited flight endurance to explore informative regions. The proposed method solves a vehicle routing problem over reported ROIs, augments the route with auxiliary pseudo-nodes to improve spatial coverage, allocates the remaining flight distance budget across route segments, and optimizes dynamically feasible B-spline trajectories for local exploration. During execution, UAV measurements update a grid-based belief map, and the remaining trajectory is replanned when new information and the remaining budget justify adaptation. Across 48 scenario configurations, online replanning improves average KL reduction by 15.9% over the offline optimized planner and 48.6% over straight-line traversal.
Battery-powered multirotor unmanned aerial vehicles (UAVs) can rapidly map unknown environments, but mission performance is often limited by energy rather than geometry alone. Standard exploration policies that optimise for coverage or time can therefore waste energy through manoeuvre-heavy trajectories. In this paper, we address energy-aware autonomous 3D exploration for multirotor UAVs in initially unknown environments. We propose Energy-Aware Autonomous Exploration (EAAE), a modular frontier-based framework that makes energy an explicit decision variable during frontier selection. EAAE clusters frontiers into view-consistent regions, plans dynamically feasible candidate trajectories to the most informative clusters, and predicts their execution energy using an offline power estimation loop. The next target is then selected by minimising predicted trajectory energy while preserving exploration progress through a dual-layer planning architecture for safe execution. We evaluate EAAE in a full exploration pipeline with a rotor-speed-based power model across simulated 3D environments of increasing complexity. Compared to representative distance-based and information gain-based frontier baselines, EAAE consistently reduces total energy consumption while maintaining competitive exploration time and comparable map quality, providing a practical drop-in energy-aware layer for frontier exploration.