Temporal Learning for End-Effector Position Estimation under Aerodynamic Disturbances in Aerial Continuum Manipulation

Aerial manipulators enable physical interaction in hard-to-reach environments; however, the combined problem of direct whole-body aerial manipulation under rapid arm motion, payload changes, and related unknown dynamic uncertainty remains a largely unsolved problem. We present a hierarchical control framework that combines Reinforcement Learning (RL) with an inner-loop dynamics estimator to address this problem. The RL outer loop maps desired 6-degrees-of-freedom (DOF) end-effector targets to coordinated whole-body commands, enabling direct task-driven control without relying on a fully accurate coupled dynamic model in the policy layer. An inner loop then tracks these commands while compensating for transient inertial shifts and uncertainty during execution via a dynamics estimator scheme without requiring system model knowledge. We validate the proposed approach on a custom quadrotor equipped with a 3-DoF manipulator through hardware experiments under varying payload conditions. Compared with RL+PID and RL+INDI+PID baselines, the proposed method reduces end-effector tracking error and improves task success rate across the tested hardware conditions. These results show that combining learned whole-body coordination with estimator-based low-level compensation improves the precision and robustness of aerial manipulation under changing operating conditions.

Autonomous Aerial Manipulators (AAMs) are inherently coupled, nonlinear systems that exhibit nonstationary and multiscale residual dynamics, particularly during manipulator reconfiguration and abrupt payload variations. Conventional analytical dynamic models rely on fixed parametric structures, while static data-driven model assume stationary dynamics and degrade under configuration changes and payload variations. Moreover, existing learning architectures do not explicitly factorize cross-variable coupling and multi-scale temporal effects, conflating instantaneous inertial dynamics with long-horizon regime evolution. We propose a predictive-adaptive framework for real-time residual modeling and compensation in AAMs. The core of this framework is the Factorized Dynamics Transformer (FDT), which treats physical variables as independent tokens. This design enables explicit cross-variable attention while structurally separating short-horizon inertial dependencies from long-horizon aerodynamic effects. To address deployment-time distribution shifts, a Latent Residual Adapter (LRA) performs rapid linear adaptation in the latent space via Recursive Least Squares, preserving the offline nonlinear representation without prohibitive computational overhead. The adapted residual forecast is directly integrated into a residual-compensated adaptive controller. Real-world experiments on an aerial manipulator subjected to unseen payloads demonstrate higher prediction fidelity, accelerated disturbance attenuation, and superior closed-loop tracking precision compared to state-of-the-art learning baselines, all while maintaining strict real-time feasibility.

This paper presents an AI-enabled cascaded hybrid vision/force control framework for tendon-driven aerial continuum manipulators based on constant-strain modeling in $SE(3)$ as a coupled system. The proposed controller is designed to enable autonomous, physical interaction with a static environment while stabilizing the image feature error. The developed strategy combines the cascaded fast fixed-time sliding mode control and a radial basis function neural network to cope with the uncertainties in the image acquired by the eye-in-hand monocular camera and the measurements from the force sensing apparatus. This ensures rapid, online learning of the vision- and force-related uncertainties without requiring offline training. Furthermore, the features are extracted via a state-of-the-art graph neural network architecture employed by a visual servoing framework using line features, rather than relying on heuristic geometric line extractors, to concurrently contribute to tracking the desired normal interaction force during contact and regulating the image feature error. A comparative study benchmarks the proposed controller against established rigid-arm aerial manipulation methods, evaluating robustness across diverse scenarios and feature extraction strategies. The simulation and experimental results showcase the effectiveness of the proposed methodology under various initial conditions and demonstrate robust performance in executing manipulation tasks.