Cooperative aerial manipulation is difficult under wind, payload motion, and noisy goal broadcasts because multiple Unmanned Aerial Vehicles (UAVs) are coupled through a shared payload. We present CALM (Cooperative Aerial Learned Manipulation), a decentralized controller for aerial manipulators carrying a basket while tracking a moving ground robot. CALM combines a parameter-shared Multi-Agent Reinforcement Learning (MARL) policy, trained using Multi-Agent Proximal Policy Optimization (MAPPO), with goal estimation, per-UAV Extended State Observers (ESOs), basket-mass estimation, and anticipatory formation-yaw feedforward. The anticipatory formation-yaw feedforward uses estimated goal motion to rotate the formation before position error develops, reducing basket-yaw lag without adding net commanded force. A disturbance-conditioned critic supports centralized training while execution remains decentralized. Across held-out trajectories, CALM achieves lower mean position and orientation errors than all evaluated baselines, including the matched arm baseline (7.68 versus 10.95 cm and 3.3 versus 4.7∘), the cable-suspended realization, and two model-based controllers. Under unseen full-information-path degradation, CALM remains statistically comparable or superior to the arm baseline. Videos are available at https://petreric.github.io/CALM/.
Aerial manipulators enable physical interaction in hard-to-reach environments; however, the combined problem of direct whole-body aerial manipulation under rapid arm motion, payload changes, and related unknown dynamic uncertainty remains a largely unsolved problem. We present a hierarchical control framework that combines Reinforcement Learning (RL) with an inner-loop dynamics estimator to address this problem. The RL outer loop maps desired 6-degrees-of-freedom (DOF) end-effector targets to coordinated whole-body commands, enabling direct task-driven control without relying on a fully accurate coupled dynamic model in the policy layer. An inner loop then tracks these commands while compensating for transient inertial shifts and uncertainty during execution via a dynamics estimator scheme without requiring system model knowledge. We validate the proposed approach on a custom quadrotor equipped with a 3-DoF manipulator through hardware experiments under varying payload conditions. Compared with RL+PID and RL+INDI+PID baselines, the proposed method reduces end-effector tracking error and improves task success rate across the tested hardware conditions. These results show that combining learned whole-body coordination with estimator-based low-level compensation improves the precision and robustness of aerial manipulation under changing operating conditions.
Aerial manipulation systems have long suffered from representation coupling in end-to-end control, as platform-level Unmanned Aerial Vehicle (UAV) movement and end-effector-level arm manipulation differ substantially in action scale, dynamics, and control objectives. In this paper, we propose AIR-VLA+, a flow matching action generation architecture specifically designed for aerial manipulation, featuring cascaded dual-action decoders and an asymmetric feature-level Mixture of Experts (MoE). We construct cascaded manipulation and movement decoders, allowing the UAV to unidirectionally observe the manipulator's intent during movement to achieve workflow coordination, while isolating the impact of UAV movement information backpropagation on arm manipulation stability. Addressing the characteristic that UAV movement is highly dependent on high-level semantics and responsible for task state transitions in aerial manipulation, we design an input feature enhancement module for the UAV movement decoder. This module introduces an implicit visual grasp projector to perceive the interaction state between the gripper and the object, and injects compressed global semantic features. Within the UAV movement decoder, we deploy an implicit MoE architecture, enabling different movement experts to spontaneously exhibit capacity inclinations for various task stages during training. Through dense soft blending computation on the feature manifold, the UAV movement is endowed with stronger task-stage adaptability. Experiments on the standardized AIR-VLA benchmark demonstrate that our method comprehensively surpasses all baselines with an overall average score of 48.0. The overall task completion score improves by 80.2% compared to the single-head π0.5 policy, effectively mitigating the heterogeneous coordinated control conflicts of composite robots.
Jianli Sun, Bin Tian, Qiyao Zhang +6
The Institute of Automation, Chinese Academy of Sciences · School of Automation, Beijing Institute of Technology · College of Automotive and Energy Engineering, Tongji University +2
Decentralized cooperative pursuit in cluttered environments is challenging for autonomous aerial swarms, especially under partial and noisy perception. Existing methods often rely on abstracted geometric features or privileged ground-truth states, and therefore sidestep perceptual uncertainty in real-world settings. We propose a decentralized end-to-end multi-agent reinforcement learning (MARL) framework that maps raw LiDAR observations directly to continuous control commands. Central to the framework is the Predictive Spatio-Temporal Observation (PSTO), an egocentric grid representation that aligns obstacle geometry with predictive adversarial intent and teammate motion in a unified, fixed-resolution projection. Built on PSTO, a single decentralized policy enables agents to navigate static obstacles, intercept dynamic targets, and maintain cooperative encirclement. Simulations demonstrate that the proposed method achieves superior capture efficiency and competitive success rates compared to state-of-the-art learning-based approaches relying on privileged obstacle information. Furthermore, the unified policy scales seamlessly across different team sizes without retraining. Finally, fully autonomous outdoor experiments validate the framework on a quadrotor swarm relying on only onboard sensing and computing.
Yude Li, Zhexuan Zhou, Huizhe Li +6
The authors are with the School of Intelligence Science and Engineering, the Guangdong Key Laboratory of Intelligent Morphing Mechanisms and Adaptive Robotics, and the Shenzhen Key Lab for Advanced Motion Control and Modern Automation Equipments, Harbin Institute of Technology, Shenzhen, Guangdong 518055, China