cs.ROOct 15, 2026

Mothership: A Two Tier Autonomous Refuse Collection System for Pedestrian Campuses

Authors: Wei Wang, Yiru Veronika Wang, Yihan Wang, Zihao Li, Xiaohui Liang

Organizations: Robostreet research team. Cambridge, MA, USA

Read PDF
Ask AI
Cite

Copy citation

DOINot available for this paper

Abstract

Refuse collection in pedestrian campuses, parks and mixed-use districts remains manual because compaction trucks cannot reach bins located on walkways, courtyards and building service doors. This paper presents Mothership, a two-tier autonomous refuse collection system in which an electric compaction truck (the mothership) carries two low-speed sidewalk robots (RoboCarts) that fetch standard two-wheel bins, deliver them to the truck, return the empty bins to their original positions and re-dock on the truck for charging. The architecture separates responsibilities by scale: the truck performs road driving, compaction, lifting and energy supply, while the carts perform only sidewalk transport and bin grasping. This split removes the lift-and-tip mechanism from the sidewalk vehicle, keeping it light and low, and relaxes cart-to-truck docking tolerance to the +/-100 mm capture window of a standard automated lifter. We describe the system architecture, the bin-handling and docking interfaces, and a mission-planning formulation that decomposes a route into truck stop points and cart tasks. A discrete-event simulation over synthetic campus layouts with 2-16 bins/ha quantifies throughput as a function of bin density, cart count and stop-point radius. A two-cart configuration serves 20-29 bins/h. Throughput is governed by an interaction between cart count and stop-point radius: a single cart performs best with many close stops, whereas three or four carts need wide stops (80 m) to stay busy, reaching 35-49 bins/h at moderate-to-high densities. The best stop radius therefore has to be chosen together with the fleet size, not fixed in advance.

More in this topic

Service Robotics

See all 12 papers

Explore similar work

CardsList
Apr 30, 2026

Framework for Collaborative Operation of Autonomous Delivery Vehicles Within a Marshaling Yard

As autonomous vehicles slowly deploy into urban roads for limited use cases with significant edge case issues, closed facilities like marshaling yards provide a ripe case for combining lower-level vehicle autonomy with fixed infrastructure to create full autonomy without similar edge case concerns. Within a delivery marshaling yard, electric fleet vehicles complete a set of sequential tasks (charging, inspection, cleaning, and loading) before exiting the yard with their new load of deliveries. Hybrid automation of the vehicles and infrastructure can allow these vehicles to reach full autonomy and navigate the facility without the need of a driver, allowing for quicker movement between tasks increasing vehicle throughput. However, isolated autonomous operations based on static rules are prone to gridlock causing facility failures that temporarily shut down operations. Our orchestrated autonomy solution uses decentralized, dynamic priority scoring of vehicles based on the current status of the marshaling yard to optimally assign vehicles to tasks to increase vehicle throughput. Using a simulated facility with three marshaling yard sizes (small, medium, and large) and three demand levels (low, medium, high), we demonstrated that our orchestration solution increases vehicle throughput above static, isolated autonomy for all combinations of yard size and demand, while reducing facility failures at high demand levels.

James O'Hara, Karl Wunderlich, Gregory Stevens

Autonomous Systems Research Center · Noblis Inc · M-City +1

Multi-Agent OrchestrationAutonomous DrivingMulti-Robot Task Allocation
AskPDF
Apr 27, 2026

OpenPodcar2: a robust, ROS2 vehicle for self-driving research

OpenPodcar2 is a robust, ROS2-interfaced, low-cost, open source hardware and software, autonomous vehicle platform based on an off-the-shelf, hard-canopy, mobility scooter donor vehicle. It is a modification of the previous OpenPodcar design, which extends it with robust electronics and ROS2 interfacing, to enable both research and also potential deployment use cases. The platform consists of (a) hardware components: documented as a bill of materials and build instructions; (b) integration to the general purpose OSH R4 mechatronics board and a Gazebo simulation of the vehicle, both presenting a common ROS2 interface (c) higher-level ROS2 software implementations and configurations of standard robot autonomous planning and control, including the nav2 stack which performs SLAM and enacts commands to drive the vehicle from a current to a desired pose around obstacles. OpenPodcar2 can transport a human passenger or similar load at speeds up to 15km/h, for example for use as a last-mile autonomous taxi service or to transport delivery containers similarly around a city center. It is small and safe enough to be parked in a standard research lab robust enough for some deployment cases. Total build cost was around 7,000USD from new components, or 2,000USD with a used Donor Vehicle. OpenPodcar2 thus provides a research balance between real world utility, safety, cost and robustness.

Rakshit Soni, Chris Waltham, Md Umar Ibrahim +2

School of Engineering and Physical Science, University of Lincoln, UK

Autonomous Driving
AskPDF
Jul 20, 2026

Lifelong Multi-Subsystem Pickup and Delivery with Buffer-Limited Handover Stations

Coordinating payload transfers between subsystems is a critical challenge in lifelong Multi-Agent Pickup and Delivery (MAPD). We study systems where agents are confined to separate regions and must exchange payloads through shared handover stations. These stations, equipped with single docks and finite buffers, are inherently vulnerable to blocking and starvation. We formalize this problem as Multi-Subsystem MAPD with Buffer-limited Handover Stations (MS-MAPD-BHS). We then propose Handover-Aware Reservation and Routing (HARR), an online controller that couples per-subsystem planners. HARR uses a shared dock reservation calendar and a deterministic rolling-horizon projection of buffer occupancy to coordinate actions. A candidate route is accepted only if its dock interval is free and the resulting buffer occupancy projection remains within capacity. Under perfect execution, these checks ensure collision-free dock use and buffer-safe committed operations within the reservation horizon. In simulation, HARR achieves up to 77% higher throughput and 92% lower backlog than a fixed-dock ablation at moderate load, while also reducing planning time relative to a coupled station-aware Token Passing baseline. These results show that explicit interface coordination substantially improves stability in modular multi-subsystem transport.

Chuanlong Zang, Isabelle Barz, Anna Mannucci +3

1Robert Bosch GmbH, Corporate Research, Stuttgart, Germany. · 2Technical University of Berlin, Berlin, Germany. · 3Robotics Institute Germany (RIG).

Multi-Agent CoordinationMulti-Robot SystemsMulti-Agent Planning
AskPDF