Tilt-Rotor Quadcopter with Learned Residual Control and Mode-Dependent State Estimation

Multirotors are widely used in applications ranging from surveillance to precision agriculture, yet conventional designs remain limited by their under-actuation. Tilt-rotor configurations overcome this limitation by enabling full actuation. This paper investigates neural-network-based control strategies for a fully actuated tilt-rotor system with four thrust-vectoring inputs. Our work is structured in two parts. First, we deliberately present a negative result by evaluating a direct input-output control approach. In this method, multilayer perceptrons (MLPs), long short-term memory (LSTM) networks, and transformer models are trained to map system states and their desired values directly to control signals. We show that this strategy fails to stabilize the system, highlighting the inherent difficulty of applying direct input-output learning to highly unstable plants. Second, as the main contribution, we propose a neural-network-enhanced sliding mode controller (SMC). The method decomposes the system dynamics into input-independent and input-dependent components, with the former learned from a small dataset using lightweight networks, thereby reducing real-time computational demands. Moreover, the proposed method can be trained using flight logs collected from low-performance controllers, and the resulting dynamic model learned from real-world data can be used in simulation. We further compare MLP- and LSTM-based implementations under model uncertainties and external disturbances, demonstrating the robustness and effectiveness of the proposed approach; in particular, the controller with the LSTM plant dynamics predictor achieves superior performance to its MLP-based counterpart while also exhibiting lower runtime.

Small multirotor aircraft are increasingly tasked with operations in the atmospheric boundary layer, where turbulent winds comparable to the vehicle's airspeed degrade trajectory tracking and can defeat conventional feedback control. This work illustrates a two-stage learning pipeline that first estimates the local wind from onboard kinematics and dynamics and then exploits that estimate inside a reinforcement learning (RL) flight controller. The wind estimator, an attention-augmented gated recurrent network trained on thousands of simulated flights through von Karman turbulence with power-law shear and veer, recovers the horizontal wind vector with a per-flight root-mean-square error of 0.40 m/s and a direction error of 3.2 degrees on unseen wind regimes, an accuracy near the floor imposed by unresolved turbulence, and generalizes to vertical ascent profiles with a skill score of 0.861 over a constant-wind reference. A proximal policy optimization controller receiving the frozen estimator's output reduces horizontal trajectory tracking error by 48% relative to a wind-blind proportional-derivative baseline across mean winds of 4 m/s to 12 m/s, winning on 100% of evaluation episodes. A three-way ablation decomposes this improvement into a kinematic component, available without wind information, and a wind-perception component; the perception share rises with wind speed, from small in light winds toward roughly half the total benefit in strong winds, consistent with the quadratic scaling of aerodynamic drag. The controller degrades gracefully on out-of-distribution winds of 13 m/s to 15 m/s, where the baseline fails catastrophically.

Quadrotors flying in tight formations are severely affected by turbulent aerodynamic interactions, such as downwash, that can cause catastrophic collisions if left unmodeled. To compensate for these effects, we propose a physics-informed residual dynamics learning framework that captures complex aerodynamic interactions while ensuring the joint multi-quadrotor system remains differentially flat. We leverage this preserved flatness to design a computationally efficient feedback linearization controller that is easily tunable with linear control techniques and cancels aerodynamic disturbances via feedforward compensation. Hardware experiments demonstrate our framework reduces average tracking errors by 31% compared to nominal baselines. Crucially, our lightweight approach matches the tracking performance of state-of-the-art nonlinear model predictive control (NMPC) while requiring an order of magnitude less computation. We are the first to show that stable, tight formation flight can be achieved with under 30 seconds of training data and a 5ms loop rate, unlocking high-fidelity aerodynamic compensation for compute-constrained flight stacks.