cs.AINov 9, 2026

ACROSSVAM3.0: Resource-Bounded 4D Scene Construction and Adaptive Surface Association

Authors: Nan Wu, Hong Yee Hung

Organizations: Across Physcis (Beijing) Technology Co., Ltd

Abstract

Combining video generation, dynamic reconstruction and monocular SLAM requires consistent coordinates, explicit handling of missing outputs and predictable memory use. We present AcrossVAM3.0, an offline system that converts text, images or monocular RGB video into a versioned point representation. Frozen components run sequentially on one GPU; map corrections update cameras, points and trajectories together. The coordination layer adds no neural parameters. Three fresh input-mode runs completed with a maximum sampled task-process-tree GPU footprint of 17.14 GB. In a frozen 16-scene video suite, every scene yielded a 4D reconstruction and 15 yielded a non-empty SLAM map. Strict cross-window matching reduced local surface error but lost long-range track coverage on TAP-Vid-DAVIS. We therefore developed multi-hypothesis adaptive surface chaining (MHAC), which retains several candidate matches and an explicit missing state. After selection on disjoint development data, MHAC improved Average Jaccard over a position-only baseline by 0.1394 on a frozen ten-video holdout (95% bootstrap interval [0.1074,0.1689]). Across 265 RoboTAP videos, the mean paired gain was 0.0610 ([0.0510,0.0715]), with 215 wins, one tie and 49 losses. These results support resource-bounded scene construction and an external tracking gain under the tested protocol. They do not establish metric scale, semantic identity or high-fidelity novel-view rendering.

Figures & tables

Appendix figures & tables1 asset

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Jul 29, 2026

VidMap: Exploiting Temporal Structure for Video-Based Structure-from-Motion

Accurately recovering the camera's calibration and metric poses for any unconstrained video would unlock large-scale training data for navigation and scene understanding. The dominant approaches to this problem are severely limited: Simultaneous Localization and Mapping (SLAM) is sensitive to initialization and transient failures due to its causal, incremental nature; it is often over-optimized for real-time operation and generally requires known camera calibration; while Structure-from-Motion (SfM) typically forgoes any image ordering, enabling optimal initialization and global optimization, but lacks robustness to visual symmetries and extreme motions. To bridge this gap, we introduce a system that combines the strong sequential constraints of SLAM with the flexibility and global optimization of offline SfM, enabling the metric reconstruction of arbitrary, long, uncalibrated videos. This system leverages recent advances in wide-baseline dense image matching, treats temporal ordering as a first-class citizen for reliable loop closure, and augments global optimization with metric monocular depth priors. As a result, thorough evaluations on diverse, challenging datasets that exhibit extreme motion and visual symmetries reveal that our approach is significantly more robust and accurate than both state-of-the-art SLAM and SfM, classical or learned, with given or unknown camera calibration. The code is publicly available at https://github.com/cvg/vidmap.
Nov 4, 2026

Scale Anchoring via Implicit Semantics and Sequence-Consistent Loop Closure for VGGT-Based SLAM

Feed-forward geometric foundation models enable dense monocular reconstruction without requiring camera calibration, but independently reconstructed submaps can accumulate scale drift, and even a valid revisit can yield an inconsistent cross-submap measurement. We extend VGGT-SLAM 2.0 with fixed-root scale anchoring and short-sequence-assisted direct loop connections. SALAD selects an image pair between the initial submap and each eligible new submap; joint VGGT inference then uses learned implicit semantic-geometric cues to supply a scale-only anchor while preserving the original overlap chain. For loop closure, neighboring image pairs support a consistency check and translation-scale alignment. Each accepted candidate contributes one robust Sim(3) factor between existing center-frame nodes, without an auxiliary loop submap. A 17-sequence comparison lowers mean Sim(3) ATE on nine TUM sequences from 0.1018 to 0.0451 m relative to the VGGT-SLAM 2.0 baseline. Anchoring improves all seven no-loop module ablations. On three Clio scenes, a fixed-loop comparison favors the direct connection pipeline over the tested auxiliary-submap pipeline. A separate candidate audit exposes additional rejections of visually overlapping pairs by the short-sequence check. These comparisons distinguish the gains from long-range scale anchoring and loop connection choices from the limitations of candidate verification.
Mar 17, 2026

M^3: Dense Matching Meets Multi-View Foundation Models for Monocular Gaussian Splatting SLAM

Streaming reconstruction from uncalibrated monocular video remains challenging, as it requires both high-precision pose estimation and computationally efficient online refinement in dynamic environments. While coupling 3D foundation models with SLAM frameworks is a promising paradigm, a critical bottleneck persists: most multi-view foundation models estimate poses in a feed-forward manner, yielding pixel-level correspondences that lack the requisite precision for rigorous geometric optimization. To address this, we present M^3, which augments the Multi-view foundation model with a dedicated Matching head to facilitate fine-grained dense correspondences and integrates it into a robust Monocular Gaussian Splatting SLAM. M^3 further enhances tracking stability by incorporating dynamic area suppression and cross-inference intrinsic alignment. Extensive experiments on diverse indoor and outdoor benchmarks demonstrate state-of-the-art accuracy in both pose estimation and scene reconstruction. Notably, M^3 reduces ATE RMSE by 64.3% compared to VGGT-SLAM 2.0 and outperforms ARTDECO by 2.11 dB in PSNR on the ScanNet++ dataset.