eess.SYNov 18, 2026

Cross-Vehicle Transferability of Lateral Velocity Estimation on Production Vehicles through Input Selection and Data Augmentation

Authors: Hendrik Schäfke, Simon F. G. Ehlers, Thomas Seel, Askar Vagapov, Christoph Schweers, Ahmed Trabelsi, Daniel O. M. Weber

Organizations: Institute of Mechatronic Systems, Leibniz University Hannover, 30823, Garbsen, Germany · L3S Research Center, Leibniz University Hannover, 30167, Hannover, Germany · IAV GmbH, 38518, Gifhorn, Germany

Abstract

Lateral velocity is safety-critical for vehicle-dynamics control but cannot be measured with production sensors. Model-based estimators such as Kalman filters are established, whereas data-driven estimators are more accurate within the training regime but suspected to lose accuracy beyond it. Their transfer to a structurally different vehicle has rarely been tested. We record real-world test drives of three series-production vehicles, train a neural-network estimator on production CAN signals of a compact car, and evaluate it zero-shot on an SUV and a van against a GNSS-aided inertial reference. On the unseen vehicles, the network's error exceeds that on the training vehicle by an order of magnitude, a gap not quantified on production vehicles before. A systematic comparison of input sets from ten production CAN signals identifies a five-signal set that transfers most robustly. To narrow this gap, we introduce three physically motivated augmentations of training data. Two improve generalization, namely exploiting the vehicle's left-right symmetry and emulating accelerometer bias. Combined, they reduce the error on the validation maneuvers of the SUV and van by 13% and 15%. Contrary to common expectation, on the SUV the data-driven estimator trained with both augmentations matches a model-based estimator tuned on the same training data.

Figures & tables

Appendix figures & tables3 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Sep 9, 2026

IMU-Centric Moving Horizon Estimation for Lateral Dynamics Estimation Across Vehicles and Grip Conditions

Accurate estimation of lateral vehicle dynamics near the adhesion limit is important for stability control and high-performance driving, but lateral velocity is rarely measured directly because sensors such as optical sensors are costly. This paper presents an inertial measurement unit (IMU)-centric Moving Horizon Estimation framework that reconstructs lateral velocity using standard onboard signals, without relying on exteroceptive odometry or detailed tire-parameter tuning. Experimental validation on human-driven sports cars and an autonomous open-wheel race car across tracks, maneuvers, and conditions demonstrates accurate and robust lateral velocity and lateral acceleration estimates. The proposed framework is available at https://github.com/Aseuffo/IMU-Centric-MHE
Nov 16, 2026

A Probabilistic Lateral Motion Prediction Model with Improved Response Fidelity for Vehicle-in-the-Loop Simulation

Vehicle-in-the-loop (VIL) simulation requires a lateral dynamics model that accurately reproduces vehicle responses and reliably generates horizontal lateral-position and heading commands through recursive integration. This paper presents a probabilistic lateral motion prediction model with improved response fidelity. A two-degree-of-freedom vehicle model provides the physical prior, while a recurrent neural network learns correlated residual corrections to lateral acceleration and yaw rate. To maintain prediction fidelity during recursive motion generation, multistep rollout training feeds corrected responses into subsequent states and histories and directly penalizes accumulated lateral-velocity error. A conditional Gaussian characterizes response uncertainty, which is propagated to lateral-response, position, and heading predictions through augmented-state linearization. Evaluation results demonstrate improved lateral-response and integrated-motion prediction. Compared with the Deep Dynamics lateral adaptation, the proposed model reduces mean lateral-position root-mean-square error (RMSE) from 0.596 m to 0.483 m, an improvement of 19.0%, while reducing mean lateral-velocity RMSE from 0.0469 m/s to 0.0441 m/s. These results demonstrate the effectiveness of combining physical priors, probabilistic residual learning, and multistep rollout training for response-faithful lateral motion prediction.
Jul 6, 2026

Uncertainty-Aware Velocity Correction for Proprioceptive Vehicle Localization using Evidential Mamba

Reliable localization in GNSS-denied environments remains a fundamental challenge for intelligent vehicles, as inertial navigation systems accumulate unbounded drift without external correction. Existing approaches provide drift correction through dedicated infrastructure, expensive external sensors, or complex multi-sensor fusion, each introducing practical deployment barriers. We propose Evidential Velocity Correction using Mamba (EVC-Mamba), a learning-based architecture that transforms onboard vehicle sensor data into a virtual velocity sensor for IMU drift correction without additional hardware. A Mamba-based selective state space model captures the temporal dynamics of vehicle motion, while evidential deep learning with a Normal-Inverse-Gamma distribution provides principled uncertainty quantification. The resulting uncertainty-aware velocity estimate is incorporated as a virtual correction measurement into an Error-State Extended Kalman Filter to reduce position drift. Evaluation on real-world vehicle data demonstrates that inertial navigation using the proposed velocity correction achieves localization accuracy within 10% of a dedicated external velocity sensor across different outage durations. The proposed architecture supports real-time onboard deployment at 40 Hz on edge hardware, enabling reliable localization during prolonged GNSS outages.