Additive Manufacturing

The technological maturity of in situ inspection and monitoring methods in additive manufacturing is steadily increasing, enabling more efficient and practical qualification procedures. In this context, image segmentation of powder bed images in Laser Powder Bed Fusion (L-PBF) has been investigated by various authors, leveraging both edge detection and machine learning approaches to identify deviations from nominal geometry. Despite these developments, several challenges remain, including the sensitivity of segmentation performance to industrial illumination conditions and layer-to-layer variability in pixel intensity patterns. The study addresses these limitations by proposing a graph-augmented segmentation approach. The underlying principle consists of preserving the geometrical information at a global level rather than at pixel-wise level, modeling dependencies and relational information among spatial regions with a Graph Neural Network bottleneck embedded into a U-Net architecture. This allows enhancing the consistency and accuracy of the geometry reconstruction in the presence of spatial and layer-wise photometric variability systematically faced in real data. The method is evaluated against benchmark techniques for the in situ reconstruction of lattice structures produced by L-PBF, demonstrating its potential as a scalable solution for robust in situ inspection and geometric verification in industrial environments.

This paper presents an IoT-enhanced deep learning framework for automated crack detection in Additive Manufacturing (AM) surfaces using convolutional neural networks (CNNs). By integrating IoT-enabled real-time monitoring, high-resolution imaging, and edge computing, the system enables continuous in-situ defect detection and classification. Real-time data acquisition supports immediate CNN-based analysis, improving both accuracy and efficiency in AM quality control. The framework supports supervised and semi-supervised learning, enabling robust performance on large, sparsely annotated datasets. Using LabelImg for annotation and OpenCV for preprocessing, the system achieves 99.54% accuracy on 14,982 images, with 96% precision, 98% recall, and a 97% F1-score. Dataset balancing and augmentation significantly improve generalization, increasing accuracy from 32% to 99%. Beyond detection, the framework establishes a linkage between AM process parameters, defect formation, and surface topology, supporting predictive analytics and defect mitigation. Aligned with Industry 4.0, it incorporates Digital Twin (DT) technology for real-time process simulation, predictive maintenance, and adaptive control. Key contributions include an IoT-based monitoring system using edge devices (Raspberry Pi 4B), an optimized CNN with model quantization and batch processing reducing inference latency by 47%, and an MQTT-based low-latency data streaming system with 5G connectivity, lowering transmission overhead by 35%. DT integration further enables predictive defect analysis and dynamic adjustment of AM parameters. This work advances intelligent AM quality control by providing a scalable, high-accuracy, and low-latency framework. Future directions include multimodal data fusion, hybrid architectures, and enhanced Digital Twin simulations for AI-driven defect prevention.

Functional magnetic composites capable of large deformation, load bearing, and multifunctional motion are essential for next-generation adaptive soft robots. Here, we present muscle-inspired magnetic actuators (MMA), additively manufactured from a thermoplastic/permanent magnet polyurethane/Nd2Fe14B (TPU/MQP-S) composite using laser powder bed fusion (LPBF). By tuning the laser-energy scale between 1.0 and 3.0, both mechanical stiffness and magnetic response are precisely controlled: the tensile strength increases from 0.28 to 0.99 MPa while maintaining 30-45% elongation at break. This process enables the creation of 0.5 mm-thick flexural hinges, which reversibly bend and fold under moderate magnetic fields without damage. Two actuator types are reported showing the system versatility. The elongated actuator with self-weight of 1.57 g, magnetized in its contracted state, achieves linear contraction under a 500 mT field, lifting 50 g (32x its own weight) and sustaining performance over at least 50 cycles. Equipped with anisotropic frictional feet, it supports movement of a magnetic crawling robot that achieves up to 100% locomotion success on textured substrates. The expandable actuator exhibits reversible opening and closing under a 300 mT field, reliably grasping and releasing different objects, including soft berries and rigid 3D printed geometries. It can also anchor in a tube while holding suspended 50 g loads. This work demonstrates a LPBF-based strategy to program both stiffness and magnetization within a single material system, enabling remotely driven, reconfigurable, and fatigue-resistant soft actuators. The approach opens new possibilities for force controlled, multifunctional magnetic soft robots for adaptive gripping, locomotion, and minimally invasive manipulation of biomedical tools.

Accurate thermal modeling in metal additive manufacturing (AM) is essential for understanding the process-structure-performance relationship. While prior studies have explored generalization across unseen process conditions, they often require extensive datasets, costly retraining, or pre-training. Generalization across different materials also remains relatively unexplored due to the challenges posed by distinct material-dependent thermal behaviors. This paper introduces a parametric physics-informed neural network (PINN) framework for zero-shot generalization across arbitrary materials without labeled data, retraining, or pre-training. The framework adopts a decoupled parametric PINN architecture that separately encodes material properties and spatiotemporal coordinates, fusing them through conditional modulation to better align with the multiplicative role of material parameters in the governing equation and boundary conditions. Physics-guided output scaling derived from Rosenthal's analytical solution and a hybrid optimization strategy are further incorporated to enhance physical consistency, training stability, and convergence. Experiments on bare plate laser powder bed fusion (LPBF) across diverse metal alloys, including both in-distribution and out-of-distribution cases, demonstrate effective zero-shot generalizability along with superior training efficiency. Specifically, the proposed framework achieved up to a 64.2% reduction in relative L2 error compared to the non-parametric baseline while surpassing its performance within only 4.4% of the baseline training epochs. Ablation studies confirm that the proposed framework's components are broadly applicable to other PINN-based approaches. Overall, the proposed framework provides an efficient and scalable material-agnostic solution for zero-shot thermal modeling, contributing to more flexible and practical deployment in metal AM.

We use fused deposition modeling (FDM) 3D printing as a case study of how manufacturing robots can use imperfect AI. In FDM, print configuration strongly affects output quality. Yet, novice users typically rely on default configurations, trial-and-error, or direct recommendations from generic AI models (e.g., ChatGPT). These strategies can produce complete prints, but they do not reliably meet specific objectives. We present a modular approach that treats an LLM as a source of tuning expertise. We embed this source of expertise within a Bayesian optimization loop. An approximate evaluator scores each candidate print configuration and returns structured diagnostics, which the LLM uses to propose natural-language adjustments that are compiled into machine-actionable guidance for optimization. On 100 Thingi10k parts, our LLM-guided loop achieves the best configuration on 78% objects with 0% likely-to-fail cases, while direct AI model recommendations are rarely best and exhibit 15% likely-to-fail cases. These results suggest that LLMs provide more value as constrained decision modules in optimization loops than as end-to-end oracles for print configuration selection. We expect this result to extend to broader LLM-based robot programming.