Chip Design

Always-on AI applications, from environmental sensors to biomedical implants, require ultra-low power consumption. Analog circuits offer a path to sub-microwatt inference, yet existing analog implementations are limited to feedforward architectures: extending them to recurrent dynamics has been considered impractical due to noise accumulation through temporal feedback. We demonstrate that this barrier can be overcome through hardware-software co-design. Specifically, we identify that Bistable Memory Recurrent Units (BMRUs), a class of Recurrent Neural Networks (RNNs) with discrete-valued outputs and hysteretic dynamics, admit an ultra-low power current-mode analog implementation which we design from first principles. The resulting circuit establishes a one-to-one correspondence between each learned parameter and a circuit element. The discrete outputs suppress analog noise by at least 20-fold at each cell boundary, breaking the noise accumulation that prevents analog recurrence. We reformulate BMRUs for first-quadrant operation with fixed thresholds, enabling the direct correspondence while preserving expressivity and trainability. Transistor-level simulations in 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) show near-perfect agreement between software predictions and circuit-level behavior, with the software model thereby serving as a high-fidelity simulator of the physical hardware at low computational cost. We leverage this fidelity to conduct large-scale noise immunity and power scaling analyses: the power cost of adding recurrence scales linearly with state dimension, while the feedforward layers dominating total power scale quadratically, meaning recurrence is added at linear marginal cost relative to the feedforward backbone. End-to-end keyword spotting achieves sub-microwatt inference at the RNN core.

We propose a new numerical method to estimate the fault tolerance of failure modes in digital circuit structures with a generative network sampling technique. From a random input of generated bitwise configurations of ideally digitalised analog currents in the digital circuit design with classical logical gates, expected output currents are compared to the realistic signals of a numerical experiment at the discriminator part of the Generative Adversarial Network (GAN) to calculate the deviation from ideal digital electronic signals, including various error modes, such as missing or interchanged logical devices. From the present analysis of a representation of the GAN in terms of complex variables, it is possible to evaluate the robustness in electronic designs by differentiating the impact of failure modes associated with different classical logical elements in the circuit.

This paper presents CARMEN, a runtime-adaptive, CORDIC-accelerated multi-precision vector engine for resource-efficient deep learning inference. The key insight is that CORDIC iteration depth directly governs computational accuracy, enabling dynamic switching between approximate and accurate execution modes without hardware modification. The architecture integrates a low-resource iterative CORDIC-based MAC unit with a time-multiplexed multi-activation function block, supporting flexible 8/16-bit precision and high hardware utilization. ASIC implementation in 28 nm CMOS achieves up to 33% reduction in computation cycles and 21% power savings per MAC stage; a 256-PE configuration delivers 4.83 TOPS/mm2 compute density and 11.67 TOPS/W energy efficiency. FPGA deployment on PynqZ2 validates 154.6 ms latency at 0.43 W for real-time object detection.

Automating analog circuit design remains a longstanding challenge in Electronic Design Automation (EDA). While Transformer-based Large Language Models (LLMs) have revolutionized software code generation, their application to analog hardware design is hindered by two critical limitations: (i) the scarcity of analog design datasets containing natural language description of a design and its corresponding netlist, and (ii) the inefficiency of general-purpose tokenizers (e.g., Byte Pair Encoding (BPE)) in capturing the inherent graph structure of circuits. To bridge this gap, first, we curate the largest annotated dataset of analog circuit netlists to date, comprising 31,341 netlist-natural language description pairs across all major circuit classes. Furthermore, we propose Circuit Tokenizer (CKT), a novel circuit graph tokenizer designed to encode netlist connectivity by explicitly mining frequent subcircuits. In terms of scalability, CKT overcomes the bottleneck of prior circuit graph serialization methods where vocabulary size scales linearly with maximum number of components in the dataset, n_max, (O(n_max)); instead, CKT decouples vocabulary growth from circuit complexity, achieving a constant O(1) complexity. Empirically, CKT outperforms standard BPE on circuit topology representation, reducing sequence length by 57% and achieving a 2.3x superior compression ratio using a compact, fixed vocabulary of size 512. Leveraging this optimized tokenization, we train a circuit-specific language model, CircuitFormer, a 511M parameter encoder-decoder transformer. Our model achieves 100% syntactic correctness and an 83% functional success rate across all major analog circuit categories, outperforming state-of-the-art open-source LLMs by 10% and 14%, respectively, while requiring 240x fewer parameters. The dataset is publicly available at https://huggingface.co/datasets/touhid314/cktformer-dataset.

Inverse design of RF passive components from S-parameters is a high-dimensional, ill-posed problem, and prior generative approaches are limited to single-layer binary-metallization structures. This paper presents an inverse design approach that generates passive components from partial S-parameter inputs on an $8\times8$ mm board discretized at $64\times64$ pixels with sub-pixel grayscale metallization across 1-20 GHz. The framework generates two-layer copper layouts with vias, with hard physical constraints on feed locations enforced through annealed Langevin projection, flexible multi-modal conditioning on partial S-parameter specifications, port locations, dielectric properties, reference topology, and variable port placement. Candidate designs are generated in seconds, with surrogate-predicted S-parameters matching targets to within $0.77 \pm 1.28$ dB weighted mean absolute error. We validate the approach with two fabricated designs on RO4003C: a manufacturable alternative to a hairpin filter whose coupling gaps violate fabrication rules, and a combline bandpass filter designed from scratch given only target S-parameters.

The deployment of Large Language Models (LLMs) for specialized engineering domains, such as circuit analysis, often faces a trade-off between reasoning accuracy and computational efficiency. Traditional evaluation methods treat model performance as a flat metric, failing to account for the hierarchical nature of engineering knowledge. We propose a performance-aware model compression strategy that utilizes prerequisite graphs to optimize model selection for circuit analysis tasks. By structuring electronics design concepts as Directed Acyclic Graphs (DAGs), we can identify the specific complexity horizons of an LLM's compressed variants' tiers. Our framework introduces an agentic pipeline for generating prerequisite-based datasets and a strategic evaluation engine that dynamically cascades queries across a spectrum of compressed variants of an LLM. This approach allows to select the smallest compressed model, given its conceptual knowledge boundaries in circuit analysis. Experimental results on analog electronics datasets demonstrate that prerequisite graphs provide a granular map of model compression with respect to the performance given circuit analysis complexity. (Source Code: https://github.com/pacomesimon/LLM_prereq_graphs_circuit_analysis, Demo: https://huggingface.co/spaces/pacomesimon/LLM_prereq_graphs_circuit_analysis)

Multiphysics simulation is critical for system-technology co-optimization (STCO) in chiplet-based design, but repeated finite-element solutions of PDE-governed problems are computationally expensive in parametric design exploration. This paper proposes a variational matrix-learning Fourier network (VMLFN) for efficient parametric multiphysics surrogate modeling. VMLFN constructs a log-space sine neural representation with randomly sampled spectral frequencies, frequency-dependent decay regulation, and embedded Dirichlet boundary conditions. With fixed hidden-layer parameters, the output-layer weights are determined by reformulating the governing PDEs into variational weak forms and enforcing the stationarity condition of the resulting energy functional. This converts physics-informed training into a linear matrix-solving problem, requiring only first-order derivatives and avoiding both high-order automatic differentiation and penalty-coefficient tuning. A heuristic frequency-scanning algorithm is further introduced to select a problem-adaptive maximum frequency that covers the dominant spectral range of the target problem. The proposed method is validated on heat conduction, solid mechanics, and Helmholtz wave propagation problems. Results from five benchmark cases demonstrate that VMLFN delivers accurate full-field predictions with substantial speedup over conventional physics-informed neural networks and repeated finite-element simulations.

Dynamic Vision Sensors (DVS) exhibit exceptional dynamic range and low power consumption, making them ideal for edge applications in the Internet of Video Things (IoVT). However, their output is often degraded by spurious Background Activity (BA) noise, leading to unnecessary computational overhead. This paper proposes SNNF, a near-sensor BA noise filter that integrates a compact Event-Based Binary Image (EBBI) representation, a parallel memory architecture, and a single-layer Spiking Neural Network (SNN) classifier. Trained on representative DVS data, the SNN distinguishes signal events from noise with an AUC of 0.89 on standard datasets. The binary-array-based EBBI eliminates timestamp dependency, significantly reducing memory footprint. Moreover, the SNN's spike-based computation replaces power-hungry multipliers with simple accumulation logic and minimizes inter-neuron data width, resulting in an extremely hardware-efficient design. FPGA implementation results show that SNNF reduces memory and logic resources to approximately 11% and 40%, respectively of state-of-the-art filters, while achieving a throughput of 29 Mega events per second (Meps). In a 65 nm CMOS ASIC implementation, SNNF achieves 44.4 Meps with an area and power consumption of only ~13% and <5% of the corresponding ANN-based designs. These results demonstrate that SNNF provides an excellent balance between filtering accuracy and hardware efficiency, making it highly suitable for resource-constrained, near-sensor deployment.

Analog and mixed-signal (AMS) circuit design remains heavily reliant on expert knowledge. While recent AI-driven automation tools can generate candidate topologies, they critically depend on manually curated datasets with functional and performance annotations -- a requirement that current large language models (LLMs) and vision models cannot automate. Existing approaches still require domain experts to manually interpret circuit functionality. We present AMSnet-q, a fully automated, unsupervised pipeline that eliminates human-in-the-loop annotation by converting schematic images directly into a labeled AMS circuit database. Unlike prior work that stops at netlist extraction, our framework automates the complete verification loop: it performs schematic-to-netlist conversion, topology-aware testbench generation, and simulation-based sizing validation to objectively determine circuit functionality. Validated in 28 nm technology, AMSnet-q processed 739 schematics from the AMSnet 1.0 dataset, automatically constructing a repository of 4 circuit classes, 105 distinct topologies, and 89,789 labeled device configurations. By decoupling human effort from dataset volume and reducing the workload to a one-time testbench template per circuit class, AMSnet-q enables scalable, objective, and fully automated AMS database construction.

System-level diagrams encode the architectural blueprint of chip design, specifying module functions, dataflows, and interface protocols. However, non-standardized symbols and the scarcity of structured training data hinder existing multimodal large language models (MLLMs) from recognizing these diagrams. To address this gap, we introduce DiagramNet, the first multimodal dataset for system-level diagrams, comprising 10,977 connection annotations and 15,515 chain-of-thought QA pairs across four tasks: Listing, Localization, Connection, and Circuit QA. Building on this dataset, we propose a progressive training pipeline together with a decoupled multi-agent workflow that decomposes complex visual reasoning into Perception, Reasoning, and Knowledge stages. On the DiagramNet benchmark, integrating our 3B-parameter model with the proposed workflow surpasses the 2025 EDA Elite Challenge winner and outperforms GPT-5, Claude-Sonnet-4, and Gemini-2.5-Pro by over 2x in end-to-end evaluation. Notably, the workflow generalizes beyond our model, boosting Task 1 performance by 128.7x for Gemini-2.5-Pro and 12.4x for GPT-5. Furthermore, with only 60 images for detector adaptation, the method transfers effectively to AMSBench, achieving zero-shot connectivity reasoning on par with GPT-5 and Claude-Sonnet-4 while surpassing the AMS state-of-the-art method Netlistify.

In financial predictions, the performance of machine learning models is often assessed by Rank IC, which is the Spearman rank correlation between the model predictions and the realized asset returns. Despite its wide adoption, most existing models are trained using regression losses or ranking objectives that may not align with Rank IC. We propose LambdaRankIC, a novel learning-to-rank approach that directly optimizes Rank IC. We circumvent the non-differentiability of the ranking operator by deriving the closed-form expression for the lambda gradients induced by the pairwise rank swaps, which enables efficient gradient-based optimization within the LambdaRank framework. We implement LambdaRankIC as a custom objective in XGBoost. Theoretically, we show that our approach optimizes an upper bound on Rank IC. We evaluate the proposed approach on both simulated and real-world financial data. In simulation studies, LambdaRankIC accurately recovers the true ranking structure in noiseless settings and consistently outperforms regression-based and NDCG-oriented ranking methods under low signal-to-noise ratios and heavy-tailed noise regimes. In empirical experiments using real market data, LambdaRankIC achieves the best out-of-sample performance on evaluation metrics commonly used in finance, including Rank IC, ICIR, monthly return, and Sharpe ratio. These results show that directly optimizing Rank IC can yield substantial improvements over conventional learning objectives in financial predictions when the full-order ranking quality is the primary goal.

Integrated Circuit (IC) verification consumes nearly 70% of the IC development cycle, and recent research leverages Large Language Models (LLMs) to automatically generate testbenches and reduce verification overhead. However, LLMs have difficulty generating testbenches correctly. Unlike high-level programming languages, Hardware Description Languages (HDLs) are extremely rare in LLMs training data, leading LLMs to produce incorrect code. To overcome challenges when using LLMs to generate Universal Verification Methodology (UVM) testbenches and sequences, wepropose HAVEN (Hybrid Automated Verification ENgine) to prevent LLMs from writing HDL directly. For UVM testbench generation, HAVEN utilizes LLM agents to analyze design specifications to produce a structured architectural plan. The HAVEN Template Engine then combines with predefined and protocol-specific templates to generate all UVM components with correct bus-handshake timing. For UVM sequence generation, HAVEN introduces a Protocol-Aware Sequence Domain-Specific Language (DSL) that decomposes sequences into fine-grained step types. A set of predefined DSL patterns first establishes sequences that achieve a high coverage rate without LLM involvement. HAVEN continues to improve the coverage rate by iteratively leveraging LLM agents to analyze coverage gap reports and compose additional targeted DSL sequences. Unlike previous works, HAVEN is the first system that utilizes pre-defined, protocol-specific Jinja2 templates to generate all UVM components and UVM sequences using our proposed Protocol-Aware DSL and rule-based code generator. Our experimental results on 19 open-source IP designs spanning three interface protocols (Direct, Wishbone, AXI4-Lite) show that HAVEN achieves 100% compilation success, 90.6% code coverage, and 87.9% functional coverage on average, and is SOTA among LLM-assisted testbench generation systems.

The primary goal of Design Verification (DV) is to ensure that a proposed chip design implementation (either in code, or physical form) exactly matches its specification and is free of functional errors in order to avoid costly re-designs. Achieving this often demands extensive manual interpretation, translating the specification document into a formal, testable representation. While AI has made progress in DV, current approaches typically focus on narrow, isolated tasks rather than full end-to-end specification compliance of modern chip designs, failing to capture the complexity of real-world verification. Our method automatically formalizes natural language memory chip specifications, for industry relevant Dynamic Random Access Memory (DRAM) standards, into a formal representation called DRAMPyML that can be used for downstream DV tasks like the generation of SystemVerilog assertions, stimulus, and functional coverage. We also release our benchmarking dataset, DRAMBench, which can be used to evaluate the evolution of model capabilities (and new approaches) at hardware autoformalization.

Chip placement is a critical step in physical design. While reinforcement learning (RL)-based methods have recently emerged, their training primarily focuses on wirelength optimization, and therefore often fail to achieve expert-quality layouts. We identify the reward design as the primary cause for the performance gap with experts, and instead of formalizing intricate processes, we circumvent this by directly learning from expert layouts to derive a reward model. Our approach starts from the final expert layouts to infer step-by-step expert trajectories. Using these trajectories as demonstrations or preferences, we train a model that captures the latent implicit rewards in expert results. Experiments show that our framework can efficiently learn from even a single design and generalize well to unseen cases.

Chip placement plays an important role in physical design. While generative models like diffusion models offer promising learning-based solutions, current methods have the following limitations: they use random synthetic data for pre-training, require long sampling times, and often result in overlaps due to their dependence on gradient-based solvers during the sampling process. To overcome these issues, we propose FlowPlace, which features mask-guided synthetic data generation, flow-based efficient training with flexible prior injection, and hard constraint sampling for overlap-free layouts. Experiments on OpenROAD and ICCAD 2015 benchmarks show FlowPlace achieves better PPA metrics, 10-50$\times$ faster sampling efficiency, and zero overlaps.

Analog circuit design relies heavily on reusing existing intellectual property (IP), yet searching across heterogeneous representations such as SPICE netlists, schematics, and functional descriptions remains challenging. Existing methods are largely limited to exact matching within a single modality, failing to capture cross-modal semantic relationships. To bridge this gap, we present AnalogRetriever, a unified tri-modal retrieval framework for analog circuit search. We first build a high-quality dataset on top of Masala-CHAI through a two-stage repair pipeline that raises the netlist compile rate from 22% to 100%. Built on this foundation, AnalogRetriever encodes schematics and descriptions with a vision-language model and netlists with a port-aware relational graph convolutional network, mapping all three modalities into a shared embedding space via curriculum contrastive learning. Experiments show that AnalogRetriever achieves an average Recall@1 of 75.2% across all six cross-modal retrieval directions, significantly outperforming existing baselines. When integrated into the AnalogCoder agentic framework as a retrieval-augmented generation module, it consistently improves functional pass rates and enables previously unsolved tasks to be completed. Our code and dataset will be released.

Recent work in the machine learning literature has demonstrated that deep learning can train neural networks made of discrete logic gate functions to perform simple image classification tasks at very high speeds on CPU, GPU and FPGA platforms. By virtue of being formed by discrete logic gates, these Differentiable Logic Gate Networks (DLGNs) lend themselves naturally to implementation in custom silicon - in this work we present a method to map DLGNs in a one-to-one fashion to a digital CMOS standard cell library by converting the trained model to a gate-level netlist. We also propose a novel loss function whereby the DLGN can optimize the area, and indirectly power consumption, of the resulting circuit by minimizing the expected area per neuron based on the area of the standard cells in the target standard cell library. Finally, we also show for the first time an implementation of a DLGN as a silicon circuit in simulation, performing layout of a DLGN in the SkyWater 130nm process as a custom hard macro using a Cadence standard cell library and performing post-layout power analysis. We find that our custom macro can perform classification on MNIST with 97% accuracy 41.8 million times a second at a power consumption of 83.88 mW.

With the advent of system-in-package (SiP) chiplet-based design and heterogeneous 2.5D/3D integration, thermal-induced warpage has become a critical reliability concern. While conventional numerical approaches can deliver highly accurate results, they often incur prohibitively high computational costs, limiting their scalability for complex chiplet-package systems. In this paper, we present WarPGNN, an efficient and accurate parametric thermal warpage analysis framework powered by Graph Neural Networks (GNNs). By operating directly on graphs constructed from the floorplans, WarPGNN enables fast warpage-aware floorplan exploration and exhibits strong transferability across diverse package configurations. Our method first encodes multi-die floorplans into reduced Transitive Closure Graphs (rTCGs), then a Graph Convolution Network (GCN)-based encoder extracts hierarchical structural features, followed by a U-Net inspired decoder that reconstructs warpage maps from graph feature embeddings. Furthermore, to address the long-tailed pattern of warpage data distribution, we developed a physics-informed loss and revised a message-passing encoder based on Graph Isomorphic Network (GIN) that further enhance learning performance for extreme cases and expressiveness of graph embeddings. Numerical results show that WarPGNN achieves more than 205.91x speedup compared with the 2-D efficient FEM-based method and over 119766.64x acceleration with 3-D FEM method COMSOL, respectively, while maintaining comparable accuracy at only 1.26% full-scale normalized RMSE and 2.21% warpage value error. Compared with recent DeepONet-based model, our method achieved comparable prediction accuracy and inference speedup with 3.4x lower training time. In addition, WarPGNN demonstrates remarkable transferability on unseen datasets with up to 3.69% normalized RMSE and similar runtime.

Vision Language Models (VLMs) have demonstrated remarkable potential in multimodal reasoning. However, they can have spatial blindness and logical hallucinations when interpreting densely structured engineering content, such as analog circuit schematics. To address these challenges, we propose a Vision Language Model-Optimized Collaborative Agent Design Workflow for Analog Circuit Sizing (VLM-CAD) designed to support step-by-step reasoning over multimodal evidence. VLM-CAD bridges the modality gap by integrating a neuro-symbolic structural parsing module, Image2Net, which transforms raw pixels into explicit topological graphs and structured JSON representations to anchor VLM interpretation in deterministic facts. To ensure the reliability required for engineering decisions, we further propose ExTuRBO, an Explainable Trust Region Bayesian Optimization method. ExTuRBO employs agent-generated semantic seeds to warm-start local searches and uses Automatic Relevance Determination to provide sensitivity evidence for the final design report. Experimental results on 12 sizing tasks covering six circuits and four technology platforms show that VLM-CAD achieves a pooled Strict Pass@1 of 23.3% and a Relaxed Pass@1 of 91.7%, while providing sensitivity evidence for final design reports.

Hybrid event-frame sensors integrate an Event Vision Sensor (EVS) and an Active Pixel Sensor (APS) within a single chip, combining the high dynamic range and low latency of the EVS with the rich spatial intensity information from the APS. While this tight integration offers compact and temporally precise imaging, the complex circuit architecture introduces nontrivial noise patterns that remain poorly understood and unmodeled. In this work, we present the first unified statistics-based imaging noise model that jointly describes the noise behavior of APS and EVS pixels. Our formulation explicitly incorporates photon shot noise, dark current noise, fixed-pattern noise, and quantization noise, and links EVS noise to illumination level and dark current. Based on this formulation, we further develop a calibration pipeline to estimate noise parameters from real data and provide a detailed analysis of both APS and EVS noise behaviors. Finally, we propose H-ESIM, a statistically grounded simulator that generates RAW frames and events under realistic jointly calibrated noise statistics. Experiments on two hybrid sensors validate our model across multiple imaging tasks, including video frame interpolation and deblurring, demonstrating strong transfer from simulation to real data.

Accurately predicting the performance of active radio frequency (RF) circuits is essential for modern wireless systems but remains challenging due to highly nonlinear behavior and the high computational cost of traditional simulation tools. Existing machine learning (ML) surrogates often require large datasets to generalize across various topologies or are not accurate on held-out circuits. This work presents a lightweight, data-efficient, and topology-aware graph neural network (GNN) framework for predicting key performance metrics of active RF circuit classes, such as low-noise amplifiers (LNAs), mixers, voltage-controlled oscillators (VCOs), power amplifiers (PAs), and voltage amplifiers (VAs). The proposed framework employs RFIC domain-informed feature indexing to enable cross-topology adaptability by cheap encoding of functional device semantics (e.g., differential pair and varactor transistors) and efficient knowledge transfer. The surrogate model represents circuits using device-terminal graph abstractions to preserve fine-grained connectivity and transistor-level symmetry. The final model is generalized to a wide variety of classes by being trained in parallel. Experimental results demonstrate accurate modeling of multimodal and heavy-tailed RF performance distributions, achieving an average mean relative error (MRE) of 2.71% across nineteen topologies, an improvement of 3.3x and 20x faster in training over prior art, and the generalization to held-out topologies is improved by ~26.2x. Furthermore, this work shows ~36x training data efficiency compared to state-of-the-art, demonstrating its effectiveness for scalable and deployment-ready RF design automation.

This paper constructs a textual dataset for training large language models (LLMs) to learn analog circuit knowledge and customizes LLM training techniques. For dataset construction, high-quality textbooks are collected and decomposed into fine-grained learning nodes, which are then used to construct structured question-thinking-solution-answer (QTSA) quadruples using a multi-agent framework to capture both final answers and thought processes. The resulting dataset consists of 7.26M tokens of unlabeled data for continual pre-training (CPT) and 112.65M tokens of labeled data for supervised fine-tuning (SFT). We customize the training techniques including initial model selection, training paradigms, regularization techniques, and practical implementation references. Instruct models are identified as suitable training initialization points, an SFT-centric training paradigm is established (finding that CPT provides marginal benefits compared with SFT due to imbalanced data distribution), and SFT with KL divergence regularization can achieve a 2.71 percentage-point improvement over SFT alone. A practical training implementation method is provided for resource-constrained scenarios. Experiments demonstrate that the dataset and training techniques enhance LLMs' analog circuit knowledge. The trained 32B instruct model achieves 84.59% accuracy on the AMSBench-TQA benchmark, showing a 15.67 percentage-point improvement over the initial model. The trained model also shows capability in the operational amplifier design task based on the Atelier framework.

As the complexity of integrated circuit designs continues to escalate, functional verification becomes increasingly challenging. Reference models, critical for accelerating the verification process, are themselves becoming more intricate and time-consuming to develop. Despite the promise shown by large language models (LLMs) in code programming, effectively generating complex reference models remains a significant hurdle. Therefore, we introduce ChatModel, an LLM-aided agile reference model generation and verification platform. ChatModel streamlines the transition from design specifications to fully functional reference models by integrating design standardization and hierarchical agile modeling. Employing a building-block generation strategy, it not only enhances the design capabilities of LLMs for reference models but also significantly boosts verification efficiency. We evaluated ChatModel on 300 designs of varying complexity, demonstrating substantial improvements in both efficiency and quality of reference model generation. ChatModel achieved a peak performance improvement of 58.99% compared to alternative methods, with notable enhancements in generation stability, and delivered a 9.18x increase in its capacity to produce reference model designs. Moreover, ChatModel accelerates the reference model design and validation cycles by an average of 7.11x over traditional manual approaches. These results highlight the potential of ChatModel to significantly advance the automation of reference model generation and validation.